Radius Frame Ears "Just Right" For Brown Beavertail Safeties
Neat little jig "buttons" show you just how much of the frame ears to mill/grind away when installing Ed's Beavertail Safety. Just drop in the thumb safety pivot pin hole, scribe around, grind/mill close, then hand file right down to the hardened button. Includes instructions.
SPECS: Hardened steel. ½" (12.7mm) dia. x 1¾" (4.4cm) long.
Mehr...
Rahmenohren "Genau Richtig" Für Braune Beavertail-Sicherheiten
Dieses praktische kleine Jig "Buttons" zeigen dir genau, wie viel von den Rahmenohren beim Einbau von Eds Beavertail-Sicherheit abgetragen werden muss. Einfach in das Loch für den Drehbolzen der Daumensicherung einsetzen, umranden, fast schleifen/fräsen und dann mit der Handfeile bis zum gehärteten Button nacharbeiten. Anleitung ist enthalten.
SPECS: Gehärteter Stahl. ½" (12,7mm) Durchmesser x 1¾" (4,4cm) lang.
Mehr...
Kundenbewertungen zu ED BROWN BROWN BEAVERTAIL JIG
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4.8
Super simple and easy to use(08.11.2009)
I don't know how this could be much better. It's cheap and with just a bit of file work you have a perfectly square fit.
Works Great!(25.07.2011)
Makes installing that beavertail easy as pie!
The only way to go for anyone looking to install an Ed Brown Bevertail.
Beavertail jig(24.08.2012)
Bought this from Ed Brown and used it to install a beavertail on a Colt. Since it was my first install I was more than a little apprehensive since it is possible to damage the frame. But I took it very slow and easy. It seems like it took forever but the Safety fits perfectly. Very simple and ends are hard enough that fies won't cut them so its well worth the investment. Gettin ready to tighten the slide-wish me luck!
Just the ticket for a successful install(01.12.2012)
A sharp flat file with slow even strokes provides for a very professional looking install. Absolutely the best way to install the Ed Brown grip safety. Some fine sandpaper and polishing gave way to a very professional looking install. The absolute best tool for the job.
MUST HAVE ITEM(14.02.2013)
This jig was just what the dr. ordered. My first time doing anything like this and the end result was outstanding. Looks like the gun came with this beavertail safety. Thanks Brownells for carrying this jig at an affordable price
Artikel-Nr.: 087145886 ED BROWN BROWN BEAVERTAIL JIG Herstellerproduktnummer: 886800732886008 Dieses praktische kleine Jig "Buttons" zeigen dir genau, wie viel von den Rahmenohren beim Einbau von Eds Beavertail-Sicherheit abgetragen werden muss. Einfach in das Loch für den Drehbolzen der Daumensicherung einsetzen, umranden, fast schleifen/fräsen und dann mit der Handfeile bis zum gehärteten Button nacharbeiten. Anleitung ist enthalten.
54.9CHF0CHF 54.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Radius Frame Ears "Just Right" For Brown Beavertail Safeties
Neat little jig "buttons" show you just how much of the frame ears to mill/grind away when installing Ed's Beavertail Safety. Just drop in the thumb safety pivot pin hole, scribe around, grind/mill close, then hand file right down to the hardened button. Includes instructions.
SPECS: Hardened steel. ½" (12.7mm) dia. x 1¾" (4.4cm) long.
Mehr...
Rahmenohren "Genau Richtig" Für Braune Beavertail-Sicherheiten
Dieses praktische kleine Jig "Buttons" zeigen dir genau, wie viel von den Rahmenohren beim Einbau von Eds Beavertail-Sicherheit abgetragen werden muss. Einfach in das Loch für den Drehbolzen der Daumensicherung einsetzen, umranden, fast schleifen/fräsen und dann mit der Handfeile bis zum gehärteten Button nacharbeiten. Anleitung ist enthalten.
SPECS: Gehärteter Stahl. ½" (12,7mm) Durchmesser x 1¾" (4,4cm) lang.
Mehr...
Kundenbewertungen zu ED BROWN BROWN BEAVERTAIL JIG
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4.8
Super simple and easy to use(08.11.2009)
I don't know how this could be much better. It's cheap and with just a bit of file work you have a perfectly square fit.
Works Great!(25.07.2011)
Makes installing that beavertail easy as pie!
The only way to go for anyone looking to install an Ed Brown Bevertail.
Beavertail jig(24.08.2012)
Bought this from Ed Brown and used it to install a beavertail on a Colt. Since it was my first install I was more than a little apprehensive since it is possible to damage the frame. But I took it very slow and easy. It seems like it took forever but the Safety fits perfectly. Very simple and ends are hard enough that fies won't cut them so its well worth the investment. Gettin ready to tighten the slide-wish me luck!
Just the ticket for a successful install(01.12.2012)
A sharp flat file with slow even strokes provides for a very professional looking install. Absolutely the best way to install the Ed Brown grip safety. Some fine sandpaper and polishing gave way to a very professional looking install. The absolute best tool for the job.
MUST HAVE ITEM(14.02.2013)
This jig was just what the dr. ordered. My first time doing anything like this and the end result was outstanding. Looks like the gun came with this beavertail safety. Thanks Brownells for carrying this jig at an affordable price