Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

Verbessere die Leistung deiner AR-15 mit dem verstellbaren Gas-Key von Rubber City Armory! 🔧 Einfach zu installieren und langlebig.
  • RUBBER CITY ARMORY ADJUSTABLE GAS KEY
  • RUBBER CITY ARMORY ADJUSTABLE GAS KEY
  • RUBBER CITY ARMORY ADJUSTABLE GAS KEY

RUBBER CITY ARMORY AR-15/M16 ADJUSTABLE GAS KEY - RUBBER CITY ARMORY ADJUSTABLE GAS KEY

100015575

Top Takeaways

  1. Der einstellbare Gas Key verbessert die Leistung von Low Mass und Standard Mass GI-Systemen.
  2. Gasfluss wird mit 2 Setzschrauben am Träger eingestellt und gehalten.
  3. Hergestellt aus vorgehärtetem 4140: 28-32RC mit abgerundeten Ecken zur Reduzierung scharfer Kanten.

Eigenschaften

  • Waffentyp: AR-15
  • Versandgewicht: 0.009kg
  • Versandhöhe: 16mm
  • Versandbreite: 57mm
  • Versandlänge: 102mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x
  • Spezifikationen:
  • Hersteller/Modell: AR-15
94.9 94.9 1 CHF
94.9 CHF CHF 94.90

Preise inkl. MwSt., zzgl. Versand

Artikel-Nr.: 100015575

Herst.-Nr.: 1AD-GKY

Der verstellbare Gas-Schlüssel von Rubber City Armory verbessert die Leistung von Low Mass und Standard Mass GI-Systemen, ohne dass eine unnötige Demontage erforderlich ist. Der Gasfluss wird mit 2 Set-Schrauben am Träger eingestellt und gehalten, eine zur Anpassung des Gasflusses und eine, um ihn an Ort und Stelle zu fixieren. Hergestellt aus vorgehärtetem 4140: 28-32RC mit abgerundeten Ecken, die scharfe Kanten reduzieren. 2 Montageschrauben sind im Lieferumfang enthalten.
Auf Lager
1
2
3
4
5
6
7
8
9
10+
  • Spezifikationen:
  • Hersteller/Modell: AR-15

Beschreibung:

Original anzeigen (Englisch)
Der verstellbare Gas-Schlüssel von Rubber City Armory verbessert die Leistung von Low Mass und Standard Mass GI-Systemen, ohne dass eine unnötige Demontage erforderlich ist. Der Gasfluss wird mit 2 Set-Schrauben am Träger eingestellt und gehalten, eine zur Anpassung des Gasflusses und eine, um ihn an Ort und Stelle zu fixieren. Hergestellt aus vorgehärtetem 4140: 28-32RC mit abgerundeten Ecken, die scharfe Kanten reduzieren. 2 Montageschrauben sind im Lieferumfang enthalten.

Top Takeaways

  1. Der einstellbare Gas Key verbessert die Leistung von Low Mass und Standard Mass GI-Systemen.
  2. Gasfluss wird mit 2 Setzschrauben am Träger eingestellt und gehalten.
  3. Hergestellt aus vorgehärtetem 4140: 28-32RC mit abgerundeten Ecken zur Reduzierung scharfer Kanten.

Eigenschaften

  • Waffentyp: AR-15
  • Versandgewicht: 0.009kg
  • Versandhöhe: 16mm
  • Versandbreite: 57mm
  • Versandlänge: 102mm

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x

Kundenbewertungen

Kundenbewertungen (3)

4.3 / 5
Sehr empfehlenswert

Brownells USA Excellent Product 31.07.2015

I ordered this product for my suppressed 16" 300blk. The first time I ordered the product, it arrived with the bag cut (where the parts are) and a small piece of tape to cover it. I was missing one mounting bolt and all of the set screws. I returned it (Brownells made it right in a hurry) and received the replacement. This one had all of the pieces. The finish of the part is done well and is smooth to the touch. There aren't any instructions on how to install it but it is pretty straightforward. I thoroughly degreased the parts and placed a thin layer of red Loctite around the gas port and set the key in place. I also used a small amount of red Loctite on the mounting screws and torqued them to 58 in/lbs. I then put a quick shot of air through the key to make sure the hole was clear and let it set up for 24 hours. I did not stake it, as I was not sure if I was going to like it.



After the Loctite was good and set up, I took the gun out to the range to see how it worked. I am shooting 110gr Varmageddons with 19.5gr of W296, at about 2400 ft/s (Carbine gas) and an AAC Cyclone suppressor. I started with the set screw all the way in the closed position and placed one round in the magazine and fired. To my surprise the case was ejected at about 3-4 o'clock and about 5 feet away. The bolt did not lock back. I tried this several more times with the same result so it doesn't appear that one would be able to shut the gas all the way with a supersonic load. Recoil was drastically reduced from how the gun ran previous, which would slam the bolt back hard and throw brass directly behind me and over 20 feet away.



I backed out the adjustment screw 1/2 a turn and repeated. Same ejection and recoil, no bolt lock back. Another 1/2 turn, and the bolt locked back. I backed the screw out another 1/4 turn and put the locking screw in on top of it (no Loctite). I then fired the weapon approximately 30 times and checked the set screws. There was 0 movement but time will tell whether I will need to put some blue Loctite on or not.



Overall this is a good product. It is easy to adjust and comes with one extra set screw and one adjustment wrench. It does come with a little Rubber City Armory logo decal. It is very cheap looking but that is not really a big deal.



Now some may be concerned with where the gas goes. It goes in the receiver as my gun was a little dirtier than normal after the small amount of firing that I did. This did not affect how the rifle ran, as I had no malfunctions. Now I will go ahead and get those screws staked in.

Bedingt empfehlenswert

Brownells USA Great Idea. 09.04.2015

Gas control screws had to be reset repeatedly.



Even with the set screw there were problems keeping it where I wanted it. Once it was adjusted the adjustment changed when you tightened the locking screw.

Ups! Da ist etwas schiefgelaufen.

Beim Laden dieses Inhalts ist ein Fehler aufgetreten. Bitte aktualisiere die Seite, um fortzufahren. Wenn das Problem weiterhin besteht, wende dich bitte an unseren Kundenservice.

Zurück nach oben