Mein Konto (Anmelden)
Ihr Warenkorb ist leer.
0
Warenkorb
kontaktiere uns telefonisch Hilfe und Kontakt
Versandkostenfreie Lieferung ab 399 CHF
100-tägiges Rückgaberecht
Sprachen: Deutsch Français Italiano
Mein Konto (Anmelden)
Merkliste
Ihr Warenkorb ist leer. (0)
Warenkorb
Newsletter Newsletter
Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

Home Optik und Montagen Ringe, Montagen und Prismen Prismen für Langwaffen EGW BROWNING BAR / BLR LONG ACTION HD PICATINNY SCOPE MOUNT Support

EGW
BROWNING BAR / BLR LONG ACTION HD PICATINNY SCOPE MOUNT

Produkt jetzt als Erster bewerten
841370114139 296000768
EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This Mount Fits: Browning BAR (all calibers) Browning BLR Long Action Browning BLR Takedown Browning BPR Browning Short Trac Benelli R1* (see below) This Mount Does Not Fit: Browning BAR MK3 DBM - This rifle has integrated picatinny style rails that are not removable In October 2019 the overall length of this mount was changed from 5.488"" to 5.094"" to accomodate takedown models.  If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown. *This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.   ***This mount does not fit the BAR ShortTrac Hog Stalker. EGW does not have a mount that works with this application. EGW has found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.
Mehr...
79.9 79.9 1 CHF
Artikel-Nr.: 296000768
EGW BROWNING BAR/BLR LA 1-PIECE PICATINNY BASE 0 MOA
Herstellerproduktnummer: 81029 841370114139
79.9 CHF 5 CHF 79.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Action Type: Long Art: Picatinny Rail Basenanzahl: 1-Piece Elevation: 0 MOA Farbe: Black Hersteller/Modell: Browning Material: Aluminum Modell: BLR, BAR
Frage stellen

Eigenschaften

Action Type: Long Art: Picatinny Rail Basenanzahl: 1-Piece Elevation: 0 MOA Farbe: Black Hersteller/Modell: Browning Material: Aluminum Modell: BAR,BLR Versandgewicht: 0.091kg Versandhöhe: 25mm Versandbreite: 102mm Versandlänge: 229mm UPC : 841370114139

Artikeldetails

Made in USA




EGW recommends measuring the hole spacing in your receiver to confirm it matches with the dimensions they have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. EGW one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. EGW machines these in their shop using one of their machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: EGW recommends 20 inch lbs of torque and a drip of blue loctite (loctite is sold separately). Recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards When zeroing your rifle with a 20 MOA mount, EGW recommends zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. This Mount Fits: Browning BAR (all calibers) Browning BLR Long Action Browning BLR Takedown Browning BPR Browning Short Trac Benelli R1* (see below) This Mount Does Not Fit: Browning BAR MK3 DBM - This rifle has integrated picatinny style rails that are not removable In October 2019 the overall length of this mount was changed from 5.488"" to 5.094"" to accomodate takedown models.  If you purchase a mount from a third party seller there is a chance it may be older and not fit your takedown. *This mount will fit the Benelli R1 Rifles. It will cover the middle hole on their action, but will use the front and back pairs.   ***This mount does not fit the BAR ShortTrac Hog Stalker. EGW does not have a mount that works with this application. EGW has found that older model BLRs may use the long action rail despite the caliber. Please measure your hole spacing to confirm.
Mehr...
BROWNELLS.CH
PRODUKTKATEGORIEN
BESTELLEN
Kundenservice

Vernetzen

Sichere Bezahlmethoden

VisaMasterCard 

Berufsverbände

SAAMI

Willkommen!

zu Brownells Schweiz, deinem Ziel für alles rund um Waffen. Mit unseren Wurzeln in einer echten Leidenschaft für Schusswaffen bieten wir dir eine unvergleichliche Auswahl an Waffenteilen, Waffenaccessoires, Werkzeugen für Büchsenmacher, Zielfernrohren & Rotpunktvisieren sowie Expertenwissen.

Egal ob du warten, reparieren oder aufrüsten möchtest, wir haben, was du brauchst!

Von Schützen, für Schützen
Wir teilen deine Begeisterung und wissen genau, wonach du suchst, weil wir Teil der Community sind.

Riesige Auswahl
Von den Grundlagen bis hin zum Einzigartigen, finde alles unter einem Dach.

Unsere Mischung aus Tradition und Innovation
Einkaufen mit dem Komfort moderner Technologie, unterstützt durch eine langjährige Erfahrung.

Stöbere in unserer Kollektion und entdecke warum wir der vertrauenswürdige Name im Schiesssport & Jagd sind.

Brownells UK - World's Largest Supplier of Gun Parts, Gunsmith Tools & Shooting Accessories Brownells Norge - Komplett utvalg av ladeutstyr, våpendeler, kuler, hylser, kikkerter, optikk og luftvåpen Brownells Österreich - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Brownells Deutschland - Einer der grössten Lieferanten für Waffenteile, Büchsenmacherzubehör & Schiesssportzubehör Brownells France - Le plus grand fournisseur d'Accessoires pour le tir, Pièces détachées & Outils d'Armurier Brownells Iberica - El mayor proveedor de accesorios para el Tiro, Piezas y herramientas del armero. Brownells Sverige - Världens största leverantör av Vapendelar, Vapensmide Verktyg & Skyttetillbehör Brownells Suomi Brownells Italia - Il negozio del più grande rivenditore di componenti e accessori per armi da tiro, difesa e caccia Brownells Polska - Największy na świecie dostawca części broni, narzędzi rusznikarskich & akcesoriów strzeleckich Brownells Česko - Největší světový dodavatel součástí zbraní, střeleckého příslušenství a zbrojního nářadí
*
Preise inkl. MwSt., zzgl. Versand

© 2024 Brownells Schweiz
Part of the Brownells Europe Group

Logo Brownells
Klassische AnsichtKlassische Ansicht Mobile AnsichtMobile Ansicht
Zurück nach oben