Permits quicker and easier magazine changes. Compact enough to fit carry holsters and not snag on clothing. Standard diameter button with crisp, machine cut checkering is .060" longer than stock for easier thumb purchase. Positive internal stop prevents over-pushing and jamming magazine in place. Machined from bar stock and heat treated for durability. Does not include catch lock and spring.
SPECS: Steel, blue finish or stainless steel (SS). Fits 1911 Autos. Button: .25" (6.3mm) O.D., .25" (6.3mm) thick.
Plus...
Remplacements de verrous pour des changements de chargeurs plus rapides
Permet des changements de chargeurs plus rapides et plus faciles. Assez compact pour s'adapter aux holsters de transport et ne pas s'accrocher aux vêtements. Le bouton de diamètre standard avec un quadrillage net, usiné, est .060" plus long que l'original pour une meilleure prise avec le pouce. Un arrêt interne positif empêche de trop pousser et de bloquer le chargeur en place. Usiné à partir de barres et traité thermiquement pour plus de durabilité. Ne comprend pas le verrou de maintien et le ressort.
SPECS : Acier, finition bleue ou acier inoxydable (SS). S'adapte aux 1911 Autos. Bouton : .25" (6.3mm) de diamètre extérieur, .25" (6.3mm) d'épaisseur.
Plus...
Évaluations client de ED BROWN EXTENDED MAGAZINE RELEASE, SS
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 3.1
Excellent quality part(16.10.2009)
These are my favorite mag catch to work with. So far they have been completely "drop in" with no fitting issues. Internal locks surfaces are also nicely done so the mag catch works very smoothly. I can easily recommend this part.
Very gritty(22.04.2011)
Ordered Ed Brown mag catch and it's gritty as heck. I have polished the edges and bore but no help. Ordered Wilson Extended release to compare and it's smooth as silk. Brown release is going in junk drawer.
Great drop in part(17.01.2012)
Looks very similar to stock Colt part, and dropped right in to my Government Model. Similar to the original magazine release on this pistol, mags would not go in smoothly at first. I had to put some grease on the catch and insert/remove the stock magazine about 50 times to "break in" the catch. It drops mags easily.
Perfectly precise fitment to frame(03.06.2013)
I have used two of these now. One on a SAM Elite 1911 and one on a RIA 1911A1 Compact. Both drop straight into the frame, very snug, but also protrude from the frame on the right side when installed. I used a proper good flat file to remove the excess protrusion and fit them flush to the frame. The finish when filed is a clean machined look.
Doesn't work well in Springfield (27.11.2016)
My son shoots USPSA and needed a new mag release since he wore his down completely. The grooves for this are too deep for his Springfield Range officer, so when he pushes the mag release in completely, it gets stuck there! Not good for a competitive shooter
I should have read previous reviews(30.09.2018)
Magazine will go only about halfway into gun when inserted. When mag. release was then depressed, magazines would then go all the way in. Same problem as others reported... gritty, rough mag. release. Tried two of these in three new high-end frames; swapping around led to same problem with all combinations. Both mag. releases returned to Brownells. (Surprising result for me since I've used many other Ed Brown parts on other 1911 builds with no glitches whatsoever.)
pretty, but poor design(12.07.2010)
Great looking part, but it doesn't work as advertised. The notch for the "mag catch lock" is cut too deep, allowing the lock to travel past the catch's disassembly slot. Why does that matter? Because the depth of that slot is what controls the travel of the mag catch in the pistol. With this too-deep notch, the mag catch can be pressed completely "flush" with the left side of the frame. More importantly, this catch "over-travel" will cause the mag catch to bind on a magazine, if the button is fully depressed. I called Ed Brown's tech line and was informed that all of their mag catches have this extra-deep notch, so they will ALL work in this same manner. As always, Caveat Emptor...
great part(14.10.2010)
Fit very well, no rough edges, not too extended.
Been using 1911's since 1966(18.10.2010)
I have always preferred the mildly extended Mag release because I have a large hand and short chubby fingers.
I have been using the Ed Brown version since Ed first offered it. Rock solid, works, and I specify it in all my custom builds.
I am down to only 21 1911's right now. Every one of them have the Ed Brown Mag release.
I have a Springfield Professional. When I got it I immediately finished it with an Ed Brown extended Magazine release. A long with a few other parts, of my preference.
I have been shooting for 56 years and carrying for business since 1966. I am very particular about how I like my 1911's set up, and which parts I prefer.
extended mag catch(14.02.2013)
This fit right into my Colt Wiley Clapp Gov't model. I had all my fitting tools handy as I have read that a lot of these extended mag catches have to be fitted. I was a little disappointed that I did not have to do any fitting(not really). My Colt and Wilson mags go in smooth, lock in great and drop free with no problem. Highly recommend.
Poor Design, even worse fit.(19.08.2015)
Very poor tolerancing-- Tried using it with several catch locks and springs, but they all bound and stuck internally. I was able to smooth it out some to achieve some functionality. But when I did, the design of the catch is such that it can push through too far and bind on the magazine you're trying to eject. Sometimes it will even stick and not let go.
Nice finish, not so much function.(19.10.2015)
Love the checkering and the finish on this part. However, as others have pointed out the button can be pushed too far pinning the mag by the release. Not super smooth compared to others I've tried. Mine will require quite a bit of fitting. The mag only inserts half way before getting caught by the mag catch. Partially pushing the mag release will allow the mag to be fully inserted or slamming the mag hard. Some fitting should fix this.
I have a Wilson extended as well and it's much smoother, but still requires some fitting to allow the mag to be smoothly inserted. The Wilson wins this one. Function over looks.
If the over travel on the EB was eliminated I would probably put in the time to properly fit it.
Référence: 087011101 ED BROWN EXTENDED MAGAZINE RELEASE, SS Ref Fabricant: 855E800732855011 Permet des changements de chargeurs plus rapides et plus faciles. Assez compact pour s'adapter aux holsters de transport et ne pas s'accrocher aux vêtements. Le bouton de diamètre standard avec un quadrillage net, usiné, est .060" plus long que l'original pour une meilleure prise avec le pouce. Un arrêt interne positif empêche de trop pousser et de bloquer le chargeur en place. Usiné à partir de barres et traité thermiquement pour plus de durabilité. Ne comprend pas le verrou de maintien et le ressort.
45.9CHF5CHF 45.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Changez vos chargeurs plus rapidement et facilement grâce à ce bouton allongé.
Compact et conçu pour ne pas s'accrocher aux vêtements, idéal pour le transport.
Usiné pour une durabilité accrue, avec un checkering précis pour une meilleure prise en main.
Caractéristiques
Finition:
Acier Inox
Main:
Droit
Manufacture:
1911
Modèle:
Government,Commander,Officers
Poids du colis: 0.009kgLargeur d'expédition: 83mmLongueur d'expédition: 146mm
UPC
: 800732855011
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 087011100 ED BROWN EXTENDED MAGAZINE RELEASE, BLUED Ref Fabricant: 854E800732854014 Permet des changements de chargeurs plus rapides et plus faciles. Assez compact pour s'adapter aux holsters de transport et ne pas s'accrocher aux vêtements. Le bouton de diamètre standard avec un quadrillage net, usiné, est .060" plus long que l'original pour une meilleure prise avec le pouce. Un arrêt interne positif empêche de trop pousser et de bloquer le chargeur en place. Usiné à partir de barres et traité thermiquement pour plus de durabilité. Ne comprend pas le verrou de maintien et le ressort.
45.9CHF13CHF 45.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Permits quicker and easier magazine changes. Compact enough to fit carry holsters and not snag on clothing. Standard diameter button with crisp, machine cut checkering is .060" longer than stock for easier thumb purchase. Positive internal stop prevents over-pushing and jamming magazine in place. Machined from bar stock and heat treated for durability. Does not include catch lock and spring.
SPECS: Steel, blue finish or stainless steel (SS). Fits 1911 Autos. Button: .25" (6.3mm) O.D., .25" (6.3mm) thick.
Plus...
Remplacements de verrous pour des changements de chargeurs plus rapides
Permet des changements de chargeurs plus rapides et plus faciles. Assez compact pour s'adapter aux holsters de transport et ne pas s'accrocher aux vêtements. Le bouton de diamètre standard avec un quadrillage net, usiné, est .060" plus long que l'original pour une meilleure prise avec le pouce. Un arrêt interne positif empêche de trop pousser et de bloquer le chargeur en place. Usiné à partir de barres et traité thermiquement pour plus de durabilité. Ne comprend pas le verrou de maintien et le ressort.
SPECS : Acier, finition bleue ou acier inoxydable (SS). S'adapte aux 1911 Autos. Bouton : .25" (6.3mm) de diamètre extérieur, .25" (6.3mm) d'épaisseur.
Plus...
Évaluations client de ED BROWN EXTENDED MAGAZINE RELEASE, SS
Nombre d'évaluations: 12
De brownells.com: 12
Note moyenne: 3.1
Excellent quality part(16.10.2009)
These are my favorite mag catch to work with. So far they have been completely "drop in" with no fitting issues. Internal locks surfaces are also nicely done so the mag catch works very smoothly. I can easily recommend this part.
Very gritty(22.04.2011)
Ordered Ed Brown mag catch and it's gritty as heck. I have polished the edges and bore but no help. Ordered Wilson Extended release to compare and it's smooth as silk. Brown release is going in junk drawer.
Great drop in part(17.01.2012)
Looks very similar to stock Colt part, and dropped right in to my Government Model. Similar to the original magazine release on this pistol, mags would not go in smoothly at first. I had to put some grease on the catch and insert/remove the stock magazine about 50 times to "break in" the catch. It drops mags easily.
Perfectly precise fitment to frame(03.06.2013)
I have used two of these now. One on a SAM Elite 1911 and one on a RIA 1911A1 Compact. Both drop straight into the frame, very snug, but also protrude from the frame on the right side when installed. I used a proper good flat file to remove the excess protrusion and fit them flush to the frame. The finish when filed is a clean machined look.
Doesn't work well in Springfield (27.11.2016)
My son shoots USPSA and needed a new mag release since he wore his down completely. The grooves for this are too deep for his Springfield Range officer, so when he pushes the mag release in completely, it gets stuck there! Not good for a competitive shooter
I should have read previous reviews(30.09.2018)
Magazine will go only about halfway into gun when inserted. When mag. release was then depressed, magazines would then go all the way in. Same problem as others reported... gritty, rough mag. release. Tried two of these in three new high-end frames; swapping around led to same problem with all combinations. Both mag. releases returned to Brownells. (Surprising result for me since I've used many other Ed Brown parts on other 1911 builds with no glitches whatsoever.)
pretty, but poor design(12.07.2010)
Great looking part, but it doesn't work as advertised. The notch for the "mag catch lock" is cut too deep, allowing the lock to travel past the catch's disassembly slot. Why does that matter? Because the depth of that slot is what controls the travel of the mag catch in the pistol. With this too-deep notch, the mag catch can be pressed completely "flush" with the left side of the frame. More importantly, this catch "over-travel" will cause the mag catch to bind on a magazine, if the button is fully depressed. I called Ed Brown's tech line and was informed that all of their mag catches have this extra-deep notch, so they will ALL work in this same manner. As always, Caveat Emptor...
great part(14.10.2010)
Fit very well, no rough edges, not too extended.
Been using 1911's since 1966(18.10.2010)
I have always preferred the mildly extended Mag release because I have a large hand and short chubby fingers.
I have been using the Ed Brown version since Ed first offered it. Rock solid, works, and I specify it in all my custom builds.
I am down to only 21 1911's right now. Every one of them have the Ed Brown Mag release.
I have a Springfield Professional. When I got it I immediately finished it with an Ed Brown extended Magazine release. A long with a few other parts, of my preference.
I have been shooting for 56 years and carrying for business since 1966. I am very particular about how I like my 1911's set up, and which parts I prefer.
extended mag catch(14.02.2013)
This fit right into my Colt Wiley Clapp Gov't model. I had all my fitting tools handy as I have read that a lot of these extended mag catches have to be fitted. I was a little disappointed that I did not have to do any fitting(not really). My Colt and Wilson mags go in smooth, lock in great and drop free with no problem. Highly recommend.
Poor Design, even worse fit.(19.08.2015)
Very poor tolerancing-- Tried using it with several catch locks and springs, but they all bound and stuck internally. I was able to smooth it out some to achieve some functionality. But when I did, the design of the catch is such that it can push through too far and bind on the magazine you're trying to eject. Sometimes it will even stick and not let go.
Nice finish, not so much function.(19.10.2015)
Love the checkering and the finish on this part. However, as others have pointed out the button can be pushed too far pinning the mag by the release. Not super smooth compared to others I've tried. Mine will require quite a bit of fitting. The mag only inserts half way before getting caught by the mag catch. Partially pushing the mag release will allow the mag to be fully inserted or slamming the mag hard. Some fitting should fix this.
I have a Wilson extended as well and it's much smoother, but still requires some fitting to allow the mag to be smoothly inserted. The Wilson wins this one. Function over looks.
If the over travel on the EB was eliminated I would probably put in the time to properly fit it.
Aide et contact
Newsletter
Vue classique
Vue mobile