Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Altro...
Riduce il Grilletto, Migliora la Precisione
Tre molle a potenza ridotta per sintonizzare e rendere più fluido il grilletto. Si adatta ai modelli più recenti P220, P226 e P229 che utilizzano una molla principale corta con un inserto in plastica per la molla del percussore. Contiene 1 molla di ciascun peso: 17, 18 e 19 lb, molle principali a potenza ridotta. La molla di fabbrica del P220 è di 22 lb. La molla di fabbrica del P226 e P229 è di 24 lb.
Altro...
Punteggi dei clienti per WOLFF SIG MAINSPRING KIT #32356
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
Wolff Sig Mainspring(11.07.2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23.03.2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06.05.2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21.05.2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.
N. prodotto: 969000021 WOLFF SIG MAINSPRING KIT #32356 Parti Fabbricante: 32356 Tre molle a potenza ridotta per sintonizzare e rendere più fluido il grilletto. Si adatta ai modelli più recenti P220, P226 e P229 che utilizzano una molla principale corta con un inserto in plastica per la molla del percussore. Contiene 1 molla di ciascun peso: 17, 18 e 19 lb, molle principali a potenza ridotta. La molla di fabbrica del P220 è di 22 lb. La molla di fabbrica del P226 e P229 è di 24 lb.
26.9CHF8CHF 26.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Sig SauerModello: P226
Tre molle a potenza ridotta per migliorare la sensazione del grilletto nei modelli P220, P226 e P229.
Contiene molle di 17, 18 e 19 lb, mentre le molle di fabbrica sono di 22 lb per P220 e 24 lb per P226 e P229.
Compatibile con molla principale corta con inserto in plastica per la molla del percussore.
Caratteristiche
Adatto per:
Sig Sauer
Modello:
P226
Peso della spedizione: 0.005kgAltezza di spedizione: 10mmLarghezza di spedizione: 97mmLunghezza di spedizione: 180mm
Dettagli dell'elemento
Made in Usa
Migliora il tuo grilletto con il SIG MAINSPRING KIT WOLFF. ⚙️ Include molle a potenza ridotta per modelli P220, P226 e P229.
Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Altro...
Riduce il Grilletto, Migliora la Precisione
Tre molle a potenza ridotta per sintonizzare e rendere più fluido il grilletto. Si adatta ai modelli più recenti P220, P226 e P229 che utilizzano una molla principale corta con un inserto in plastica per la molla del percussore. Contiene 1 molla di ciascun peso: 17, 18 e 19 lb, molle principali a potenza ridotta. La molla di fabbrica del P220 è di 22 lb. La molla di fabbrica del P226 e P229 è di 24 lb.
Altro...
Punteggi dei clienti per WOLFF SIG MAINSPRING KIT #32356
Numero di punteggi: 4
Da brownells.com: 4
Punteggio medio: 4.5
Wolff Sig Mainspring(11.07.2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23.03.2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06.05.2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21.05.2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.