Chemically-treated cloth effectively attacks lead and copper bore deposit and removes them with only a few passes. Adds luster to nickel and stainless steel surfaces. Instantly removes carbon residue/powder fouling from the face of revolver cylinders and lead/plastic fouling in shotgun barrels.
SPECS: 6” x 9”
Altro...
Il panno trattato chimicamente attacca efficacemente i depositi di piombo e rame nel calcio e li rimuove con solo poche passate. Aggiunge lucentezza alle superfici in nichel e acciaio inossidabile. Rimuove istantaneamente i residui di carbonio/contaminazione da polvere dalla faccia dei cilindri dei revolver e la contaminazione da piombo/plastica nei tubi dei fucili.
SPECS: 6” x 9”
Altro...
Punteggi dei clienti per BIRCHWOOD CASEY RUST & LEAD REMOVER CLOTH - TREATED TAN 11 X 14
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 5
The best product for stainless guns(13.08.2014)
This is the best product for cleaning the faces of revolver cylinders. It does require some intense rubbing to get the job done, but not as rough on the parts as a brass brush. I also use a piece of the material on a bronze bore brush mounted on a cordless drill to clean the insides of the cylinder. This makes a big difference when you sell a gun. Clean gets you more money!
One great product !!!!!!(19.03.2015)
I use this cloth on my stainless steel S&W 357. I have owned it for 2 months now and spent so many hours cleaning it trying to make it look new as it did 2 months ago. Then I purchased a Birchwood Casey cloth and was amazed at how much time it saves me and the job is so much easier. ONE GREAT PRODUCT ! I highly recommend it.
Birchwood Casey lead removal cloth (22.03.2015)
Outstanding for removing lead deposits on revolver cylinders and around crane and forcing cone area. I highly recommend this cloth for cleaning lead deposits !!
Lead Remover Cloth!(31.12.2015)
Use only on stainless steel finishes, it removes bluing! My cowboy shooting guns see a whole lot of lead through them, this cleans the crud and residue amazingly well.
Outstanding product...(04.08.2017)
This removed the lead and carbon marks on the front face of my S&W 686 cylinder like nothing. Just a few lite buffing passes and gone. Before it I had tried every cleaner I had and only got a small amout off. I would recommend cutting the cloth into strips and then those into smaller patches. Then after one patch gets all nasty just use a new one. No need to handle the big cloth.
N. prodotto: 100044535 BIRCHWOOD CASEY RUST & LEAD REMOVER CLOTH - TREATED TAN 11 X 14 Parti Fabbricante: BC-RLREM888151026564 Il panno trattato chimicamente attacca efficacemente i depositi di piombo e rame nel calcio e li rimuove con solo poche passate. Aggiunge lucentezza alle superfici in nichel e acciaio inossidabile. Rimuove istantaneamente i residui di carbonio/contaminazione da polvere dalla faccia dei cilindri dei revolver e la contaminazione da piombo/plastica nei tubi dei fucili.
16.9CHF30CHF 16.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Il panno trattato rimuove efficacemente i depositi di piombo e rame nel cilindro.
Aggiunge lucentezza a superfici in nichel e acciaio inossidabile.
Rimuove residui di carbonio e depositi di piombo/plastica nei tubi dei fucili da caccia.
Caratteristiche
Dimensioni:
11x4
Peso della spedizione: 0.045kgAltezza di spedizione: 13mmLarghezza di spedizione: 114mmLunghezza di spedizione: 178mm
UPC
: 888151026564
N. prodotto: 167000060 BIRCHWOOD CASEY LEAD REMOVER CLOTH, 6" X 9" Parti Fabbricante: BC-31002029057310023 Il panno trattato chimicamente attacca efficacemente i depositi di piombo e rame nel calcio e li rimuove con solo poche passate. Aggiunge lucentezza alle superfici in nichel e acciaio inossidabile. Rimuove istantaneamente i residui di carbonio/contaminazione da polvere dalla faccia dei cilindri dei revolver e la contaminazione da piombo/plastica nei tubi dei fucili.
19.9CHF0CHF 19.90
*
In arretrato, tempi di consegna circa 4-12 settimane dal magazzino negli Stati Uniti.
Chemically-treated cloth effectively attacks lead and copper bore deposit and removes them with only a few passes. Adds luster to nickel and stainless steel surfaces. Instantly removes carbon residue/powder fouling from the face of revolver cylinders and lead/plastic fouling in shotgun barrels.
SPECS: 6” x 9”
Altro...
Il panno trattato chimicamente attacca efficacemente i depositi di piombo e rame nel calcio e li rimuove con solo poche passate. Aggiunge lucentezza alle superfici in nichel e acciaio inossidabile. Rimuove istantaneamente i residui di carbonio/contaminazione da polvere dalla faccia dei cilindri dei revolver e la contaminazione da piombo/plastica nei tubi dei fucili.
SPECS: 6” x 9”
Altro...
Punteggi dei clienti per BIRCHWOOD CASEY RUST & LEAD REMOVER CLOTH - TREATED TAN 11 X 14
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 5
The best product for stainless guns(13.08.2014)
This is the best product for cleaning the faces of revolver cylinders. It does require some intense rubbing to get the job done, but not as rough on the parts as a brass brush. I also use a piece of the material on a bronze bore brush mounted on a cordless drill to clean the insides of the cylinder. This makes a big difference when you sell a gun. Clean gets you more money!
One great product !!!!!!(19.03.2015)
I use this cloth on my stainless steel S&W 357. I have owned it for 2 months now and spent so many hours cleaning it trying to make it look new as it did 2 months ago. Then I purchased a Birchwood Casey cloth and was amazed at how much time it saves me and the job is so much easier. ONE GREAT PRODUCT ! I highly recommend it.
Birchwood Casey lead removal cloth (22.03.2015)
Outstanding for removing lead deposits on revolver cylinders and around crane and forcing cone area. I highly recommend this cloth for cleaning lead deposits !!
Lead Remover Cloth!(31.12.2015)
Use only on stainless steel finishes, it removes bluing! My cowboy shooting guns see a whole lot of lead through them, this cleans the crud and residue amazingly well.
Outstanding product...(04.08.2017)
This removed the lead and carbon marks on the front face of my S&W 686 cylinder like nothing. Just a few lite buffing passes and gone. Before it I had tried every cleaner I had and only got a small amout off. I would recommend cutting the cloth into strips and then those into smaller patches. Then after one patch gets all nasty just use a new one. No need to handle the big cloth.