AK47 MFER (Magazine Funnel Enhanced Reload) Allows the user to reload an AK47 faster than ever Large funnel opening guides magazine into position Drop-in part, no modification to the host weapon Fits all AKM pattern AK47 style rifles along with 7.62 Saigas Will not fit standard Yugo pattern AKs Polymer construction with stainless steel hardware Includes mounting hardware
AK47 MFER (Magazine Funnel Enhanced Reload) Ermöglicht es dir, ein AK47 schneller als je zuvor nachzuladen. Grosse Trichteröffnung führt das Magazin in die richtige Position. Einfache Montage, keine Modifikation der Waffe erforderlich. Passt für alle AKM Muster AK47 Gewehre sowie 7.62 Saigas. Passt nicht für Standard Yugo Muster AKs. Polymerkonstruktion mit Edelstahlbeschlägen. Montagematerial ist im Lieferumfang enthalten.
SPECS: Passt für AKM/AK47 Gewehre. Polymerkonstruktion, Edelstahlbeschläge.
Mehr...
Kundenbewertungen zu SOLAR TACTICAL AK47 MAG WELL
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 1.9
Does not fit WASR-10(16.01.2013)
Does not fit WASR-10, waste of money.
Doesn't work(17.04.2013)
I bought one from the guy at a gun show and it didn't work on my Arsenal/Saiga AK-47. I ended up mailing it back to the owner in Hayward Ca. for a refund. I wish it would've worked but it is flawed.
Bad Fit(29.04.2013)
This would not install on my Romanian
AK-47 MFER Mag Well works(04.11.2013)
Due to the wide variety of AK variants out there the MFER mag well must be fitted to each individual rifle. The receivers of different manufacturers differ in thickness so you will need to make adjustments accordingly. The different thickness in the sheet metal receivers may require you to remove the little metal piece on the MFER that clips over the front of the mag well and open it up to fit the thicker receivers. Just make sure you remove the metal piece from the MFER before making the adjustment. Also you may need to use a dremel tool or file to trim the rear of the MFER around the area of the mag release to fit properly. The above adjustments are not difficult to do. Once properly fitted the MFER works great. Makes your AK mag changes smoother, easier, and much faster.
Cheaply made(12.01.2014)
Fit on my Arsenal AK fine. Or so I thought. Small screw attaching metal lip to the receiver stripped out. Figured no problem, as I have some more loctite and I'll try that. Installed it again, began to screw in the sides when the cheap 'polymer' cracked and almost split in two. Tried some JB Weld and and figured I could just sand it down later. Tried fitting a metal Bulgarian factory mag and a Tapco mag in, and neither would fit due to the mag funnel. Removed and trashed.
I'd suggest training with mag reloads and get used to how it works.
I would not recommend putting this on any rifle you plan to use to defend your life. If you can get it to work for a range weapon or competitions, best of luck.
It works as adertised(20.07.2014)
I bought one to give it try on my 74, was very pleased. I've used this adapter in training classes, The large funnel opening guides magazine into position, facilitates in a faster reload. Drop-in part, no modification to the weapon.
Fits WASR 10 after fitting.(15.08.2014)
I used this to complete a double stack mod on my economy WASR 10. I used the unit as a pattern to open up my receiver. Fitting of the small metal tang was the only issue. Minor grinding and opening the spring opening was all that was required. This is not a bolt on but with minor fitting it works well. I am using tapco 20rds with a nice snug fit.
Don't buy (13.04.2015)
The mag well had to be worked on several times to get proper fit. I had to Dremel it a lot. One of the screw holes was off center which made if very difficult screw together. The screws are weak and way to small. After it was installed it didn't seem to do much to assist the the magazine feed. I removed it and scrapped it. This thing cost way to much, and it is just junk. Save your money. I read the reviews and still bought it. Bad idea.
Save your money(09.03.2017)
This is a cheap, flimsy, useless piece of plastic that doesn't fit (at all) and is held together with hardware so small that I thought they accidentally shipped parts to the world's smallest model airplane or displays from a class on how to keep choking hazards away from toddlers. Awful design for a rifle that has a rep as one of the most tough and durable firearms in history. Save your money and load your AK like Mikhail intended.
Artikel-Nr.: 100010894 SOLAR TACTICAL AK47 MAG WELL Herstellerproduktnummer: AK47-MFER AK47 MFER (Magazine Funnel Enhanced Reload) Ermöglicht es dir, ein AK47 schneller als je zuvor nachzuladen. Grosse Trichteröffnung führt das Magazin in die richtige Position. Einfache Montage, keine Modifikation der Waffe erforderlich. Passt für alle AKM Muster AK47 Gewehre sowie 7.62 Saigas. Passt nicht für Standard Yugo Muster AKs. Polymerkonstruktion mit Edelstahlbeschlägen. Montagematerial ist im Lieferumfang enthalten.
Der AK47 MFER ermöglicht dir ein schnelleres Nachladen deines AK47 mit einer grossen Trichteröffnung.
Einfach zu montieren, ohne Modifikation an der Waffe erforderlich, und passt für alle AKM-Muster AK47 Gewehre sowie 7.62 Saigas.
Hergestellt aus Polymer mit Edelstahlbeschlägen, Montagematerial ist im Lieferumfang enthalten.
Eigenschaften
Farbe:
Black
Hersteller/Modell:
AK-47
Versandgewicht: 0.023kgVersandhöhe: 8mmVersandbreite: 52mmVersandlänge: 108mm
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Erlebe blitzschnelles Nachladen mit dem AK-47 MAGAZINE WELL! ⚡ Einfache Montage für alle AKM Modelle. Hol dir jetzt die Effizienz!
AK47 MFER (Magazine Funnel Enhanced Reload) Allows the user to reload an AK47 faster than ever Large funnel opening guides magazine into position Drop-in part, no modification to the host weapon Fits all AKM pattern AK47 style rifles along with 7.62 Saigas Will not fit standard Yugo pattern AKs Polymer construction with stainless steel hardware Includes mounting hardware
AK47 MFER (Magazine Funnel Enhanced Reload) Ermöglicht es dir, ein AK47 schneller als je zuvor nachzuladen. Grosse Trichteröffnung führt das Magazin in die richtige Position. Einfache Montage, keine Modifikation der Waffe erforderlich. Passt für alle AKM Muster AK47 Gewehre sowie 7.62 Saigas. Passt nicht für Standard Yugo Muster AKs. Polymerkonstruktion mit Edelstahlbeschlägen. Montagematerial ist im Lieferumfang enthalten.
SPECS: Passt für AKM/AK47 Gewehre. Polymerkonstruktion, Edelstahlbeschläge.
Mehr...
Kundenbewertungen zu SOLAR TACTICAL AK47 MAG WELL
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 1.9
Does not fit WASR-10(16.01.2013)
Does not fit WASR-10, waste of money.
Doesn't work(17.04.2013)
I bought one from the guy at a gun show and it didn't work on my Arsenal/Saiga AK-47. I ended up mailing it back to the owner in Hayward Ca. for a refund. I wish it would've worked but it is flawed.
Bad Fit(29.04.2013)
This would not install on my Romanian
AK-47 MFER Mag Well works(04.11.2013)
Due to the wide variety of AK variants out there the MFER mag well must be fitted to each individual rifle. The receivers of different manufacturers differ in thickness so you will need to make adjustments accordingly. The different thickness in the sheet metal receivers may require you to remove the little metal piece on the MFER that clips over the front of the mag well and open it up to fit the thicker receivers. Just make sure you remove the metal piece from the MFER before making the adjustment. Also you may need to use a dremel tool or file to trim the rear of the MFER around the area of the mag release to fit properly. The above adjustments are not difficult to do. Once properly fitted the MFER works great. Makes your AK mag changes smoother, easier, and much faster.
Cheaply made(12.01.2014)
Fit on my Arsenal AK fine. Or so I thought. Small screw attaching metal lip to the receiver stripped out. Figured no problem, as I have some more loctite and I'll try that. Installed it again, began to screw in the sides when the cheap 'polymer' cracked and almost split in two. Tried some JB Weld and and figured I could just sand it down later. Tried fitting a metal Bulgarian factory mag and a Tapco mag in, and neither would fit due to the mag funnel. Removed and trashed.
I'd suggest training with mag reloads and get used to how it works.
I would not recommend putting this on any rifle you plan to use to defend your life. If you can get it to work for a range weapon or competitions, best of luck.
It works as adertised(20.07.2014)
I bought one to give it try on my 74, was very pleased. I've used this adapter in training classes, The large funnel opening guides magazine into position, facilitates in a faster reload. Drop-in part, no modification to the weapon.
Fits WASR 10 after fitting.(15.08.2014)
I used this to complete a double stack mod on my economy WASR 10. I used the unit as a pattern to open up my receiver. Fitting of the small metal tang was the only issue. Minor grinding and opening the spring opening was all that was required. This is not a bolt on but with minor fitting it works well. I am using tapco 20rds with a nice snug fit.
Don't buy (13.04.2015)
The mag well had to be worked on several times to get proper fit. I had to Dremel it a lot. One of the screw holes was off center which made if very difficult screw together. The screws are weak and way to small. After it was installed it didn't seem to do much to assist the the magazine feed. I removed it and scrapped it. This thing cost way to much, and it is just junk. Save your money. I read the reviews and still bought it. Bad idea.
Save your money(09.03.2017)
This is a cheap, flimsy, useless piece of plastic that doesn't fit (at all) and is held together with hardware so small that I thought they accidentally shipped parts to the world's smallest model airplane or displays from a class on how to keep choking hazards away from toddlers. Awful design for a rifle that has a rep as one of the most tough and durable firearms in history. Save your money and load your AK like Mikhail intended.
Hilfe und Kontakt
Newsletter
Klassische Ansicht
Mobile Ansicht