Looks Right, Reduces Recoil On Pre-& Post-Ban Rifles
Machined from bar stock with an integral, solid baffle that won t shoot out. Top and side ports counter recoil and muzzle rise. Solid bottom controls dust printing. A-2-style looks correct on pre- and post-ban rifles. Includes roll pin for permanent installation. Simplifies conversion of pre-ban barrels to post-ban configuration.
Sieht gut aus, reduziert Rückstoss bei vor- & nach dem Verbot hergestellten Gewehren
Aus Rundstahl gefertigt mit einem integralen, soliden Baffle, der nicht herausgeschossen wird. Oben und an den Seiten befinden sich Ports, die Rückstoss und Mündungsanhebung reduzieren. Der solide Boden kontrolliert Staubverwirbelungen. Der A-2-Stil sieht an vor- und nach dem Verbot hergestellten Gewehren gut aus. Enthält einen Rollstift für die permanente Installation. Vereinfacht die Umrüstung von vor dem Verbot hergestellten Läufen auf die Konfiguration nach dem Verbot.
Kundenbewertungen zu CAVALRY MANUFACTURING. CAV COMP 22 CALIBER 1/2-28 STEEL BLACK
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4.4
good comp for little money(12.05.2010)
I have one of these on my cavarms builds. Works well and takes out some recoil better than the more expensive ones.
very satisfied(08.09.2010)
I am in a ban state, so it is either crowned or pinned comp/brake for me. I have been looking for a brake that resembles the A2 device for a while and a device that did'nt break the bank. when I found this cav comp..I found my device! It is on a 20in BCM upper and looks great! I will be putting another on my middy lightweight in the furture.
great comp(05.11.2010)
Great comp if you want your rifle look like a m4,but want a comp rather than birdcage flash hider for faster 2 shot.Works great on two of my blackrifles..
Least expensive compliant comp(24.04.2012)
Least expensive comp that will qualify for NY compliant guns. Comes drilled and with pin for permenant installation. Just place a spot weld over pin. Looks like an A2 flash hider.Bluing finish is a little thin and marks easily.
Great Muzzle Brake(25.07.2012)
The Cav Comp is a great muzzle brake to buy if you are building an upper and need to replace the flash suppressor with something legal in the "post-ban" configuration. The Cav Comp reduced the movement of my barrel during firing, and it has less of a concussive blast than other muzzle brakes. It is pre-drilled and the pin is even included. Just be sure to mount the Cav Comp so that the ports are in the 9,12,and 3 positions respectively. A mounted Cav Comp also looks more tactical than many of the other muzzle brakes on the market do.
Artikel-Nr.: 100000189 CAVALRY MANUFACTURING. CAV COMP 22 CALIBER 1/2-28 STEEL BLACK Herstellerproduktnummer: NONE Aus Rundstahl gefertigt mit einem integralen, soliden Baffle, der nicht herausgeschossen wird. Oben und an den Seiten befinden sich Ports, die Rückstoss und Mündungsanhebung reduzieren. Der solide Boden kontrolliert Staubverwirbelungen. Der A-2-Stil sieht an vor- und nach dem Verbot hergestellten Gewehren gut aus. Enthält einen Rollstift für die permanente Installation. Vereinfacht die Umrüstung von vor dem Verbot hergestellten Läufen auf die Konfiguration nach dem Verbot.
Looks Right, Reduces Recoil On Pre-& Post-Ban Rifles
Machined from bar stock with an integral, solid baffle that won t shoot out. Top and side ports counter recoil and muzzle rise. Solid bottom controls dust printing. A-2-style looks correct on pre- and post-ban rifles. Includes roll pin for permanent installation. Simplifies conversion of pre-ban barrels to post-ban configuration.
Sieht gut aus, reduziert Rückstoss bei vor- & nach dem Verbot hergestellten Gewehren
Aus Rundstahl gefertigt mit einem integralen, soliden Baffle, der nicht herausgeschossen wird. Oben und an den Seiten befinden sich Ports, die Rückstoss und Mündungsanhebung reduzieren. Der solide Boden kontrolliert Staubverwirbelungen. Der A-2-Stil sieht an vor- und nach dem Verbot hergestellten Gewehren gut aus. Enthält einen Rollstift für die permanente Installation. Vereinfacht die Umrüstung von vor dem Verbot hergestellten Läufen auf die Konfiguration nach dem Verbot.
Kundenbewertungen zu CAVALRY MANUFACTURING. CAV COMP 22 CALIBER 1/2-28 STEEL BLACK
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4.4
good comp for little money(12.05.2010)
I have one of these on my cavarms builds. Works well and takes out some recoil better than the more expensive ones.
very satisfied(08.09.2010)
I am in a ban state, so it is either crowned or pinned comp/brake for me. I have been looking for a brake that resembles the A2 device for a while and a device that did'nt break the bank. when I found this cav comp..I found my device! It is on a 20in BCM upper and looks great! I will be putting another on my middy lightweight in the furture.
great comp(05.11.2010)
Great comp if you want your rifle look like a m4,but want a comp rather than birdcage flash hider for faster 2 shot.Works great on two of my blackrifles..
Least expensive compliant comp(24.04.2012)
Least expensive comp that will qualify for NY compliant guns. Comes drilled and with pin for permenant installation. Just place a spot weld over pin. Looks like an A2 flash hider.Bluing finish is a little thin and marks easily.
Great Muzzle Brake(25.07.2012)
The Cav Comp is a great muzzle brake to buy if you are building an upper and need to replace the flash suppressor with something legal in the "post-ban" configuration. The Cav Comp reduced the movement of my barrel during firing, and it has less of a concussive blast than other muzzle brakes. It is pre-drilled and the pin is even included. Just be sure to mount the Cav Comp so that the ports are in the 9,12,and 3 positions respectively. A mounted Cav Comp also looks more tactical than many of the other muzzle brakes on the market do.