Mil-Spec Fire Control Group includes: Investment Cast Hammer, CNC Machined, Heat Treated, Phosphated, Precision Ground Investment Cast Trigger, CNC Machined, Heat Treated, Phosphated, Precision Ground Stamped Disconnector, Precision Ground, Heat Treated, Phosphated 100% Made in the USA
Mehr...
Die Mil-Spec Fire Control Group umfasst: Guss-Hammer, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Guss-Abzug, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Stempel-Disconnect, präzisionsgeschliffen, wärmebehandelt, phosphatiert. 100% hergestellt in den USA.
Mehr...
Kundenbewertungen zu ZRO DELTA AR-15 FIRE CONTROL GROUP LASER CUT DISCONNECTOR
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3.5
Excellent Milspec Trigger Group(25.03.2018)
An overall excellent milspec style of trigger group. The pull is heavy, but smooth and surprisingly crisp. Very minimal creep and a normal amount of over travel. The only problem I had was the disconnector not fitting well. With the trigger pulled, the disconnector did not have enough travel to catch the hammer without the trigger moving forward. Some careful time on a belt sander fixed the disconnector very easily. If you need a milspec trigger group, do not hesitate to get this one! Remember to pick up a trigger spring, hammer spring, and disconnector spring as this kit does not include them.
Disconnectors(30.03.2018)
Ordered two of them and on both the disconnectors wouldn't engage while the triggers were only very lightly depressed. A "firm" trigger hold back back and they would not engage unless I let some pressure off the trigger..A little time with a file and they now engage with the trigger depressed firmly, although it takes quite a bit of force on the hammer to get it to engage..I think this might be an issue with mild loads not forcing the BCG back with enough force to overcome this resistance from the disconnector. Other than that, they function about as well as any MIl Spec trigger.
Disconnector doesn't fit(25.04.2018)
I bought this to go with my JP trigger springs, It looked good but The trigger Disconnector does not fit inside the trigger. I am not sure which piece is defective.
I am the 3rd of three reviews that have this problem. I would steer clear.
Props to Brownells for their excellent return policy.
Great Deal For the Money(26.07.2018)
I purchased 3 of these trigger groups on 2 different orders at 2 different times. I installed them on 3 different Lowers, an Anderson, DPMS and a Palmetto, all of then fit perfect, all of them were smooth with a crisp trigger break. I was so impressed that I referred them to my Brother and he purchased a set for his rifle with the same good results. You can pay more and get less, just saying!
Artikel-Nr.: 100500153 ZRO DELTA AR-15 FIRE CONTROL GROUP LASER CUT DISCONNECTOR Herstellerproduktnummer: 7091-0002-1520 Die Mil-Spec Fire Control Group umfasst: Guss-Hammer, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Guss-Abzug, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Stempel-Disconnect, präzisionsgeschliffen, wärmebehandelt, phosphatiert. 100% hergestellt in den USA.
Made in USA
US-Exportklassifizierung: 0A501.c
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke die Mil-Spec AR-15 Fire Control Group! 🔥 Hochwertige Komponenten, 100% made in USA. Optimiere dein Schiesserlebnis jetzt!
Mil-Spec Fire Control Group includes: Investment Cast Hammer, CNC Machined, Heat Treated, Phosphated, Precision Ground Investment Cast Trigger, CNC Machined, Heat Treated, Phosphated, Precision Ground Stamped Disconnector, Precision Ground, Heat Treated, Phosphated 100% Made in the USA
Mehr...
Die Mil-Spec Fire Control Group umfasst: Guss-Hammer, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Guss-Abzug, CNC-bearbeitet, wärmebehandelt, phosphatiert, präzisionsgeschliffener Stempel-Disconnect, präzisionsgeschliffen, wärmebehandelt, phosphatiert. 100% hergestellt in den USA.
Mehr...
Kundenbewertungen zu ZRO DELTA AR-15 FIRE CONTROL GROUP LASER CUT DISCONNECTOR
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 3.5
Excellent Milspec Trigger Group(25.03.2018)
An overall excellent milspec style of trigger group. The pull is heavy, but smooth and surprisingly crisp. Very minimal creep and a normal amount of over travel. The only problem I had was the disconnector not fitting well. With the trigger pulled, the disconnector did not have enough travel to catch the hammer without the trigger moving forward. Some careful time on a belt sander fixed the disconnector very easily. If you need a milspec trigger group, do not hesitate to get this one! Remember to pick up a trigger spring, hammer spring, and disconnector spring as this kit does not include them.
Disconnectors(30.03.2018)
Ordered two of them and on both the disconnectors wouldn't engage while the triggers were only very lightly depressed. A "firm" trigger hold back back and they would not engage unless I let some pressure off the trigger..A little time with a file and they now engage with the trigger depressed firmly, although it takes quite a bit of force on the hammer to get it to engage..I think this might be an issue with mild loads not forcing the BCG back with enough force to overcome this resistance from the disconnector. Other than that, they function about as well as any MIl Spec trigger.
Disconnector doesn't fit(25.04.2018)
I bought this to go with my JP trigger springs, It looked good but The trigger Disconnector does not fit inside the trigger. I am not sure which piece is defective.
I am the 3rd of three reviews that have this problem. I would steer clear.
Props to Brownells for their excellent return policy.
Great Deal For the Money(26.07.2018)
I purchased 3 of these trigger groups on 2 different orders at 2 different times. I installed them on 3 different Lowers, an Anderson, DPMS and a Palmetto, all of then fit perfect, all of them were smooth with a crisp trigger break. I was so impressed that I referred them to my Brother and he purchased a set for his rifle with the same good results. You can pay more and get less, just saying!