Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

BREEK ARMS
AR-15 WAHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE

812296030902 430106998
The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
69.9 69.9 4 CHF
Artikel-Nr.: 430106998
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE ODG
Herstellerproduktnummer: BRK555-RGREEN 812296030902
69.9 CHF 23 CHF 69.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Short Finish: O.D. Green Hand: Ambidextrous Hersteller/Modell: AR-15

Eigenschaften

Art: Short Finish: O.D. Green Hand: Ambidextrous Hersteller/Modell: AR-15 Versandgewicht: 0.041kg Versandhöhe: 19mm Versandbreite: 95mm Versandlänge: 222mm UPC : 812296030902

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x



Artikel-Nr.: 430106995
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE BLK
Herstellerproduktnummer: BRK555 812296030872
69.9 CHF 194 CHF 69.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Short Finish: Black Hand: Ambidextrous Hersteller/Modell: AR-15
Artikel-Nr.: 430106996
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE FDE
Herstellerproduktnummer: BRK555-FDE 812296030889
69.9 CHF 154 CHF 69.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Short Finish: Flat Dark Earth Hand: Ambidextrous Hersteller/Modell: AR-15
Artikel-Nr.: 430106997
BREEK ARMS AR-15 WARHAMMER MICRO MOD2 AMBIDEXTROUS CHARGING HANDLE GRAY
Herstellerproduktnummer: BRK555-MGRAY 812296030896
69.9 CHF 47 CHF 69.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Short Finish: Gray Hand: Ambidextrous Hersteller/Modell: AR-15
The Breek Arms WARHAMMER MICRO MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The smaller latches on the MICRO are for use when shooting with gear, slings, or barriers to avoid snagging. The total width of the latches measures 2.40", slightly wider than a standard charging handle width. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! FEATURES: Material: 7075-T6 aluminum Fits all mil spec AR15/M16 Rifles Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075-T6 aluminum Reduced size ambidextrous release levers on both sides, 2.40" total width across the handles Set-Back Latches work great for large optics Allows for one handed manipulation Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses Weighs in just under 1 ounce! No gun smith required Made in America
0
Auf Lager
CHF 39.90
Zurück nach oben