Replaces the bolt carrier, seals the upper receiver and provides safe and effective cleaning from the breech instead of the muzzle. Solid aluminum rod guide helps prevent throat and chamber damage plus, the rubber "O" rings keep bore cleaning solvents out of the lower receiver. Bore guides will exhibit small points of unanodized material at the rear end. This is where the parts are attached to the dipping fixture when anodizing and is normal on these parts.
Hilft, Schäden am Mündungsbereich, Hals & Kammer zu verhindern
Ersetzt den Verschlussträger, dichtet den oberen Empfänger ab und ermöglicht sicheres und effektives Reinigen vom Patronenlager anstelle des Mündungsbereichs. Der robuste Aluminium-Rohrführer hilft, Schäden am Hals und Kammer zu verhindern, zudem halten die gummierten "O"-Ringe Reinigungsmittel für den Lauf vom unteren Empfänger fern. Laufreiniger können kleine Stellen mit unanodisiertem Material am hinteren Ende aufweisen. Dies ist der Bereich, in dem die Teile beim Anodisieren an die Tauchvorrichtung angeschlossen sind und ist bei diesen Teilen normal.
SPECS: Aus gefrästem Aluminium, AR-15 - rote, anodisierte Oberfläche. 10" (25cm) lang. Passt nur für .223. AR-10 - blaue, anodisierte Oberfläche. 11,5" (29,2cm) lang. Passt nur für .308.
Mehr...
Kundenbewertungen zu J P ENTERPRISES AR-15 CLEANING ROD GUIDE RED
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.6
Essential tool(03.04.2010)
You need this and a good Dewey coated rod to keep your AR-10's rifling leades in top condition.
Won't fit Sig 716 .308(08.01.2016)
Sig told me this guide would fit their 716 rifle.
Will not work without sever machining mod.
More than I expected(31.10.2009)
This is a high Quality and well made Tool. The cleaning rod with a bore brush or cleaning jag are guided easily through the chamber and into the bore.
MUST HAVE(07.05.2010)
This is great! A must have for your AR-15. Makes cleaning much easyer. Just make sure you put a good amount of oil on the o-rings beafore every use.
WOW(14.07.2010)
This is a Must for every SPR AR-15. Ease cleaning like never. Range cleaning is now easy business. Bullet proof built. I am very impress. Dont forget your Sinclair Ar-15 link to go with it Thank you JP enterprises
Great Produce(26.01.2012)
After trying several less expensive "plastic" guides I finally got this one and couldn't be happier. Extremely well built, and it should last for years. Well worth a few dsollars more, it can travle in your range bag without fear of it breaking.
Great product(19.05.2012)
Very well made. Had one of the nylon/plastic guides before, rolled off the bench and broke the extension that fits in the chamber. This one won't do that. It's basically bullet proof, pun intended. Very portable and works in my Rock River and Colt as well as my buddy's DPMS, which you would expect. A little more money, but you'll never need to replace it.
A must tool for cleaning AR15 bore(09.02.2015)
very useful tool in cleaning my m4a1 bore. Just put the cleaning rod with soaked patch and push....and it goes in the bore smoothly. Unlike if only the cleaning rod is used, lots of time you need to be careful inserting it.
Top shelf quality and performance(19.09.2018)
I had been waiting for years to afford a Bravo Company rifle and finally have one so I wanted a JP Bore guide for AR15 and a Dewey plastic coated 36" rod to protect my investment. These two items absolutely work together perfectly. I greased the two o-rings with lithium grease and slowly inserted it with a little side to side encouragement. Then you rotate the bore guide until your window of opportunity appears and you are ready. Your brush , jags and other tips are going to insert through the guide and stay attached until finished. One note : the bore guide will not enter the receiver while using the Wheeler vise stand. The bore guide and rod were more important to me than the vise which I returned. You will be proud to own this guide. Mine was used in my BCM and a Rock River Arms LAR15.
Artikel-Nr.: 452015220 J P ENTERPRISES AR-15 CLEANING ROD GUIDE RED Herstellerproduktnummer: JPRG-1812872022628 Ersetzt den Verschlussträger, dichtet den oberen Empfänger ab und ermöglicht sicheres und effektives Reinigen vom Patronenlager anstelle des Mündungsbereichs. Der robuste Aluminium-Rohrführer hilft, Schäden am Hals und Kammer zu verhindern, zudem halten die gummierten "O"-Ringe Reinigungsmittel für den Lauf vom unteren Empfänger fern. Laufreiniger können kleine Stellen mit unanodisiertem Material am hinteren Ende aufweisen. Dies ist der Bereich, in dem die Teile beim Anodisieren an die Tauchvorrichtung angeschlossen sind und ist bei diesen Teilen normal.
69.9CHF0CHF 69.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 452015221 J P ENTERPRISES AR-308 CLEANING ROD GUIDE BLUE Herstellerproduktnummer: JPRG-2812872022635 Ersetzt den Verschlussträger, dichtet den oberen Empfänger ab und ermöglicht sicheres und effektives Reinigen vom Patronenlager anstelle des Mündungsbereichs. Der robuste Aluminium-Rohrführer hilft, Schäden am Hals und Kammer zu verhindern, zudem halten die gummierten "O"-Ringe Reinigungsmittel für den Lauf vom unteren Empfänger fern. Laufreiniger können kleine Stellen mit unanodisiertem Material am hinteren Ende aufweisen. Dies ist der Bereich, in dem die Teile beim Anodisieren an die Tauchvorrichtung angeschlossen sind und ist bei diesen Teilen normal.
74.9CHF0CHF 74.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Replaces the bolt carrier, seals the upper receiver and provides safe and effective cleaning from the breech instead of the muzzle. Solid aluminum rod guide helps prevent throat and chamber damage plus, the rubber "O" rings keep bore cleaning solvents out of the lower receiver. Bore guides will exhibit small points of unanodized material at the rear end. This is where the parts are attached to the dipping fixture when anodizing and is normal on these parts.
Hilft, Schäden am Mündungsbereich, Hals & Kammer zu verhindern
Ersetzt den Verschlussträger, dichtet den oberen Empfänger ab und ermöglicht sicheres und effektives Reinigen vom Patronenlager anstelle des Mündungsbereichs. Der robuste Aluminium-Rohrführer hilft, Schäden am Hals und Kammer zu verhindern, zudem halten die gummierten "O"-Ringe Reinigungsmittel für den Lauf vom unteren Empfänger fern. Laufreiniger können kleine Stellen mit unanodisiertem Material am hinteren Ende aufweisen. Dies ist der Bereich, in dem die Teile beim Anodisieren an die Tauchvorrichtung angeschlossen sind und ist bei diesen Teilen normal.
SPECS: Aus gefrästem Aluminium, AR-15 - rote, anodisierte Oberfläche. 10" (25cm) lang. Passt nur für .223. AR-10 - blaue, anodisierte Oberfläche. 11,5" (29,2cm) lang. Passt nur für .308.
Mehr...
Kundenbewertungen zu J P ENTERPRISES AR-15 CLEANING ROD GUIDE RED
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 4.6
Essential tool(03.04.2010)
You need this and a good Dewey coated rod to keep your AR-10's rifling leades in top condition.
Won't fit Sig 716 .308(08.01.2016)
Sig told me this guide would fit their 716 rifle.
Will not work without sever machining mod.
More than I expected(31.10.2009)
This is a high Quality and well made Tool. The cleaning rod with a bore brush or cleaning jag are guided easily through the chamber and into the bore.
MUST HAVE(07.05.2010)
This is great! A must have for your AR-15. Makes cleaning much easyer. Just make sure you put a good amount of oil on the o-rings beafore every use.
WOW(14.07.2010)
This is a Must for every SPR AR-15. Ease cleaning like never. Range cleaning is now easy business. Bullet proof built. I am very impress. Dont forget your Sinclair Ar-15 link to go with it Thank you JP enterprises
Great Produce(26.01.2012)
After trying several less expensive "plastic" guides I finally got this one and couldn't be happier. Extremely well built, and it should last for years. Well worth a few dsollars more, it can travle in your range bag without fear of it breaking.
Great product(19.05.2012)
Very well made. Had one of the nylon/plastic guides before, rolled off the bench and broke the extension that fits in the chamber. This one won't do that. It's basically bullet proof, pun intended. Very portable and works in my Rock River and Colt as well as my buddy's DPMS, which you would expect. A little more money, but you'll never need to replace it.
A must tool for cleaning AR15 bore(09.02.2015)
very useful tool in cleaning my m4a1 bore. Just put the cleaning rod with soaked patch and push....and it goes in the bore smoothly. Unlike if only the cleaning rod is used, lots of time you need to be careful inserting it.
Top shelf quality and performance(19.09.2018)
I had been waiting for years to afford a Bravo Company rifle and finally have one so I wanted a JP Bore guide for AR15 and a Dewey plastic coated 36" rod to protect my investment. These two items absolutely work together perfectly. I greased the two o-rings with lithium grease and slowly inserted it with a little side to side encouragement. Then you rotate the bore guide until your window of opportunity appears and you are ready. Your brush , jags and other tips are going to insert through the guide and stay attached until finished. One note : the bore guide will not enter the receiver while using the Wheeler vise stand. The bore guide and rod were more important to me than the vise which I returned. You will be proud to own this guide. Mine was used in my BCM and a Rock River Arms LAR15.