Maintains Precise Handguard Alignment While Tightening The Locking Ring
Eyeballing a railed, free-float handguard for perfect alignment with your flattop receiver is only half the battle. Keeping it from going cockeyed as you tighten the locking ring is another story. Talk about frustrating! Avoid the hassle with this handy jig that aligns the top handguard rail with the receiver rail and keeps it there. Just slide the jig on the rails, secure its setscrews, and tighten the locking ring you re done! With the time it saves, this tool will pay for itself the first few times you use it. A must for maintaining handguard alignment to ensure night vision devices, vertical grips, flip-up front sights, and other add-on accessories are also properly aligned. Precision machined from high-quality 6061 billet aluminum, then hardcoat anodized for extra strength and years of wear resistance. Designed for use with railed, free-float tubes that have a locking ring.
Hält die präzise Handguard-Ausrichtung beim Festziehen des Verriegelungsrings aufrecht
Das Ausrichten eines gerillten, freischwebenden Handguards für die perfekte Ausrichtung mit deinem Flattop-Empfänger ist nur die halbe Miete. Es davon abzuhalten, schief zu werden, während du den Verriegelungsring festziehst, ist eine ganz andere Geschichte. Das kann frustrierend sein! Vermeide den Ärger mit diesem praktischen Werkzeug, das die obere Handguard-Schiene mit der Empfängerschiene ausrichtet und dort hält. Schiebe einfach das Werkzeug auf die Schienen, sichere die Einstellschrauben und ziehe den Verriegelungsring fest – und schon bist du fertig! Mit der Zeitersparnis wird sich dieses Werkzeug schon bei den ersten paar Anwendungen amortisieren. Ein Muss, um die Handguard-Ausrichtung aufrechtzuerhalten und sicherzustellen, dass Nachtsichtgeräte, vertikale Griffe, klappbare Frontvisiere und andere Zubehörteile ebenfalls richtig ausgerichtet sind. Präzise aus hochwertigem 6061 Billet-Aluminium gefertigt und dann hartanodisiert für zusätzliche Stärke und jahrelange Verschleissfestigkeit. Entwickelt für die Verwendung mit gerillten, freischwebenden Rohren, die einen Verriegelungsring haben.
Kundenbewertungen zu BROWNELLS HANDGUARD ALIGNMENT TOOL
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 2.1
Super Easy To Use(30.06.2009)
Does exactly what they claim. It makes getting your rail perfectly aligned with your flattop receiver a breeze. If you're going to invest [$] in a top of the line rail system it just makes good sense to make sure it's lined up As close to perfectly as humanly possible.Just be careful. Mine had a slight burr that would have scratched the finish if I hadn't caught it.
May be good for some, not others.(24.11.2010)
Found that this tool does not do a good job for screw on free float tubes such as thoses made by DPMS or Yankee Hill (Ones that screw onto a barrel nut that is provided with the tube.) Simply put, it does help line up the rails; however you will not be able to exert enough torque on the jam nut to securely hold the tube. Found out that I had to remove the tool and use a strap wrench and eyeball it as I had always done. It may help with the free float tubes that clamp onto the standard barrel retaining nuts; however, many of these index with the teeth on the nut. If they are not positioned exactly center of the rail when the barrel is installed, the tube will be off as well. Perhaps it was not designed for it, but it does not work on most free float tubes I have experence with. It may work if you are attempting to install a picatinny rail section to a standard round free float tube or some other custom application.
Well Worth The Money(03.02.2012)
I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.
Hit and miss(03.04.2013)
This product does work - HOWEVER; The design requires that the tool be "slid" down the rail to get it into position and is VERY tight on most rails I've used it with. This COULD cause scratches or marring - nothing that will affect proper function of the completed system but if it's a customers' rifle or one you don't want to scratch/mar, then you'll end up not using this and line up the rails without it.... If both sections were bolt-on instead.... Just sayin'
Worthless(25.09.2014)
The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.
Poor Choice(16.01.2017)
Well, I normally would not have purchased this because of the reviews, but I figured âwhy notâ try it. Now that I have tried it, itâs nothing more than an expensive paperweight. It doesnât work on any handguard or receiver I own. It will damage your finish because itâs toooo tight. It was a nice thought to have two adjustment screws on the larger block, but they serve no useful purpose. Would recommend, if Brownells desires, to at least enable the two adjustment screws to be able to tighten around the rails. Overall, just a mistake and would not recommend to anyone.
It will damage upper. (05.05.2017)
Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.
Artikel-Nr.: 080000368 BROWNELLS HANDGUARD ALIGNMENT TOOL050806005990 Das Ausrichten eines gerillten, freischwebenden Handguards für die perfekte Ausrichtung mit deinem Flattop-Empfänger ist nur die halbe Miete. Es davon abzuhalten, schief zu werden, während du den Verriegelungsring festziehst, ist eine ganz andere Geschichte. Das kann frustrierend sein! Vermeide den Ärger mit diesem praktischen Werkzeug, das die obere Handguard-Schiene mit der Empfängerschiene ausrichtet und dort hält. Schiebe einfach das Werkzeug auf die Schienen, sichere die Einstellschrauben und ziehe den Verriegelungsring fest – und schon bist du fertig! Mit der Zeitersparnis wird sich dieses Werkzeug schon bei den ersten paar Anwendungen amortisieren. Ein Muss, um die Handguard-Ausrichtung aufrechtzuerhalten und sicherzustellen, dass Nachtsichtgeräte, vertikale Griffe, klappbare Frontvisiere und andere Zubehörteile ebenfalls richtig ausgerichtet sind. Präzise aus hochwertigem 6061 Billet-Aluminium gefertigt und dann hartanodisiert für zusätzliche Stärke und jahrelange Verschleissfestigkeit. Entwickelt für die Verwendung mit gerillten, freischwebenden Rohren, die einen Verriegelungsring haben.
79.9CHF0CHF 79.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Mit dem Handguard Alignment Tool kannst du die obere Handguard-Schiene einfach mit der Empfängerschiene ausrichten und sicherstellen, dass alles perfekt sitzt.
Das Werkzeug ist aus hochwertigem 6061 Billet-Aluminium gefertigt und bietet jahrelange Abriebfestigkeit durch die hartbeschichtete anodisierte Oberfläche.
Ideal für gerillte, freischwebende Rohre mit Sicherungsring, um die Ausrichtung von Nachtsichtgeräten und anderem Zubehör zu gewährleisten.
Maintains Precise Handguard Alignment While Tightening The Locking Ring
Eyeballing a railed, free-float handguard for perfect alignment with your flattop receiver is only half the battle. Keeping it from going cockeyed as you tighten the locking ring is another story. Talk about frustrating! Avoid the hassle with this handy jig that aligns the top handguard rail with the receiver rail and keeps it there. Just slide the jig on the rails, secure its setscrews, and tighten the locking ring you re done! With the time it saves, this tool will pay for itself the first few times you use it. A must for maintaining handguard alignment to ensure night vision devices, vertical grips, flip-up front sights, and other add-on accessories are also properly aligned. Precision machined from high-quality 6061 billet aluminum, then hardcoat anodized for extra strength and years of wear resistance. Designed for use with railed, free-float tubes that have a locking ring.
Hält die präzise Handguard-Ausrichtung beim Festziehen des Verriegelungsrings aufrecht
Das Ausrichten eines gerillten, freischwebenden Handguards für die perfekte Ausrichtung mit deinem Flattop-Empfänger ist nur die halbe Miete. Es davon abzuhalten, schief zu werden, während du den Verriegelungsring festziehst, ist eine ganz andere Geschichte. Das kann frustrierend sein! Vermeide den Ärger mit diesem praktischen Werkzeug, das die obere Handguard-Schiene mit der Empfängerschiene ausrichtet und dort hält. Schiebe einfach das Werkzeug auf die Schienen, sichere die Einstellschrauben und ziehe den Verriegelungsring fest – und schon bist du fertig! Mit der Zeitersparnis wird sich dieses Werkzeug schon bei den ersten paar Anwendungen amortisieren. Ein Muss, um die Handguard-Ausrichtung aufrechtzuerhalten und sicherzustellen, dass Nachtsichtgeräte, vertikale Griffe, klappbare Frontvisiere und andere Zubehörteile ebenfalls richtig ausgerichtet sind. Präzise aus hochwertigem 6061 Billet-Aluminium gefertigt und dann hartanodisiert für zusätzliche Stärke und jahrelange Verschleissfestigkeit. Entwickelt für die Verwendung mit gerillten, freischwebenden Rohren, die einen Verriegelungsring haben.
Kundenbewertungen zu BROWNELLS HANDGUARD ALIGNMENT TOOL
Anzahl der Bewertungen: 7
Von brownells.com: 7
Durchschnittliche Bewertung: 2.1
Super Easy To Use(30.06.2009)
Does exactly what they claim. It makes getting your rail perfectly aligned with your flattop receiver a breeze. If you're going to invest [$] in a top of the line rail system it just makes good sense to make sure it's lined up As close to perfectly as humanly possible.Just be careful. Mine had a slight burr that would have scratched the finish if I hadn't caught it.
May be good for some, not others.(24.11.2010)
Found that this tool does not do a good job for screw on free float tubes such as thoses made by DPMS or Yankee Hill (Ones that screw onto a barrel nut that is provided with the tube.) Simply put, it does help line up the rails; however you will not be able to exert enough torque on the jam nut to securely hold the tube. Found out that I had to remove the tool and use a strap wrench and eyeball it as I had always done. It may help with the free float tubes that clamp onto the standard barrel retaining nuts; however, many of these index with the teeth on the nut. If they are not positioned exactly center of the rail when the barrel is installed, the tube will be off as well. Perhaps it was not designed for it, but it does not work on most free float tubes I have experence with. It may work if you are attempting to install a picatinny rail section to a standard round free float tube or some other custom application.
Well Worth The Money(03.02.2012)
I used this tool to install a YHM handguard and completed the job in less than ten minutes. It sure beats trying to keep everything aligned with a ruler while tightening the jam nut.
Hit and miss(03.04.2013)
This product does work - HOWEVER; The design requires that the tool be "slid" down the rail to get it into position and is VERY tight on most rails I've used it with. This COULD cause scratches or marring - nothing that will affect proper function of the completed system but if it's a customers' rifle or one you don't want to scratch/mar, then you'll end up not using this and line up the rails without it.... If both sections were bolt-on instead.... Just sayin'
Worthless(25.09.2014)
The tool that received does not fit on the rails at all. The fit was so tight, all it did was end up scratching up the rails. I finally gave up trying to make it fit. Worthless.
Poor Choice(16.01.2017)
Well, I normally would not have purchased this because of the reviews, but I figured âwhy notâ try it. Now that I have tried it, itâs nothing more than an expensive paperweight. It doesnât work on any handguard or receiver I own. It will damage your finish because itâs toooo tight. It was a nice thought to have two adjustment screws on the larger block, but they serve no useful purpose. Would recommend, if Brownells desires, to at least enable the two adjustment screws to be able to tighten around the rails. Overall, just a mistake and would not recommend to anyone.
It will damage upper. (05.05.2017)
Nice idea, but needs serious redesign. Does not fit all rails. Can scar and/or scrape surfaces.