Votre panier est vide.

Panier

Aide et contact

Livraison standard gratuite pour les commandes de plus de 399 CHF

Politique de retour de 100 jours

Newsletter

Promotions

Plus de 300 000 clients - nous vous disons merci !

4,93/5 "Très bien" (1400+ avis)

40 000+ produits pour la chasse et le tir sportif

POWER CUSTOM
AR-15/M16 RECEIVER SHIMS

713000108

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

Tempered stainless steel shims reduce play between receiver halves and hammer/trigger components for a tighter, smoother-functioning rifle. Helps restore accuracy and reduce noise in older rifles. Upper/Lower shims fit on the pivot pin to reduce side-to-side play between the upper and lower receiver.

SPECS: Stainless steel, heat-hardened. Pak of 10.

Plus...

Élimine le jeu indésirable entre les récepteurs supérieurs/inferieurs et les composants de la détente

Les cales en acier inoxydable trempé réduisent le jeu entre les moitiés du récepteur et les composants de la détente/du marteau pour un fusil plus serré et fonctionnant plus en douceur. Aide à restaurer la précision et à réduire le bruit dans les fusils plus anciens. Les cales supérieures/inferieures se fixent sur la goupille de pivot pour réduire le jeu latéral entre le récepteur supérieur et inférieur.

SPÉCIFICATIONS : Acier inoxydable, durci par la chaleur. Paquet de 10.

Plus...

Évaluations client de POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)

I bought this product after seeing it in learning section of the website. I am currently a full time police officer/firearms instructor and have wasted thousands of dollars on gimmicks and other bs products that claim to get rid of every problem you have with your rifle. At my department we are all assigned an individual m4 carbine that is ours. We are also allowed to make slight modifications within reason and this is only on the ouside not internally in the gun. Ive been assigned the same m4 for ten years now and have tens of thousands of rounds through it from training, personal training, attending brass maker carbine classes, and annual qualifications. My point, my rifle has some wear and tear on it. It is a bushmaster (old school rifle actually made in the Windham, Maine plant before Freedom group bought them out.) This was a $600 rifle when I bought it. Its not a $2,000 rifle. It has gone the distance and then some and rarely, I mean rarely had a malfunction which has been due to ammo everytime.

So from this wear and tear Ive never had to replace buffer springs, gas tubes, etc. Ive only cleaned it and stayed up on it. However this brings to me to my point. My upper and lower have considerbale play in them. There's some slop. I tried the accuwedge from Brownells which did do a good job of getting rid of the rear slop however I still had front slop. I tried the accuwedge in another rifle build I have which got rid of all the slop. The rifle I built was brand new and didn't have any of the wear and tear on it my duty rifle did. So at first I tried one shim on both take down and pivot pins. Didn't take all of the slop out but most of it. So I then tried two shims on each pin. It was so tight I couldnt lock the upper and lower together. After some quick research I ended up going with an accuwedge in the rear by the buffer and two shims on the pivot pin. Worked like a charm. Rifle feels brand new. It doesn't move like a cerokoted rifle. Again, my rifle doesn't move at all. There is zero slop. This was done all for the cost of the $20. Brownells accuwedge is a great addition to any rifle. Get it along with the shims. You wont be sorry. Also becareful of reviews. Some people aren't intelligent enough to actually be assembling these rifles. i WOULD RECCOMEND THIS TO A FRIEND AND EVERYONE. HERES A HINT BROWNELLS. YOU SHOULD SELL YOUR ACCUWEDGE WITH THE RECIEVER SHIMS AS PART OF A PACK DEAL.

Works (16.01.2017)

As noted by others, the shims in this pack are all the same width and takes patience to install. Otherwise, they work as advertised. I added 2, one to each side of my front pivot pin, and the receiver "wobble" was gone. Also, opening and closing the receiver with the shims installed were not a problem. I would've given this product 5-stars had different shim widths been supplied versus being all the same.

Lire 3 plus d'avis sur brownells.com

54.9 54.9 1 CHF

Référence: 713000108
POWER CUSTOM UPPER/LOWER RECEIVER SHIMS
Ref Fabricant: NONE Les cales en acier inoxydable trempé réduisent le jeu entre les moitiés du récepteur et les composants de la détente/du marteau pour un fusil plus serré et fonctionnant plus en douceur. Aide à restaurer la précision et à réduire le bruit dans les fusils plus anciens. Les cales supérieures/inferieures se fixent sur la goupille de pivot pour réduire le jeu latéral entre le récepteur supérieur et inférieur.

54.9 CHF 15 CHF 54.90 *

Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.

Caractéristiques: Manufacture: AR-15

Ajouter à la Liste d'Envies

Poser un question

Propriétés

Ajouter à la Liste d'Envies

Poser un question

Points forts

Les cales en acier inoxydable trempé améliorent la précision et réduisent le bruit des fusils anciens.
Facilitent un ajustement plus serré entre le récepteur supérieur et inférieur.
Viennent en paquet de 10, parfaits pour un entretien régulier de votre AR-15/M16.

Caractéristiques

Manufacture: AR-15 Poids du colis: 0.023kg Hauteur d'expédition: 5mm Largeur d'expédition: 104mm Longueur d'expédition: 165mm

Détails de l'article

Fabriqué au USA

Améliore ton fusil avec les cales AR-15 en acier inoxydable 🔩. Réduis le jeu et restaure la précision pour un tir plus fluide.

Eliminates Unwanted Play Between Upper/Lower Receivers & Trigger Components

SPECS: Stainless steel, heat-hardened. Pak of 10.

Plus...

Élimine le jeu indésirable entre les récepteurs supérieurs/inferieurs et les composants de la détente

SPÉCIFICATIONS : Acier inoxydable, durci par la chaleur. Paquet de 10.

Plus...

Évaluations client de POWER CUSTOM UPPER/LOWER RECEIVER SHIMS

Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 4.7

The best receiver "wobble" fix! (13.02.2014)

These shims are the best fix for receiver wobble. No need to "accu-wedge" or o-ring your upper. This will make it solid and they are discreet. Buy with confidence. Fix the pesky wobble.

slop (21.02.2016)