Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Mehr...
Passt auf die meisten AR-Stil .308 Gewehrplattformen
Robustes Stahlmagazin mit Phosphatbeschichtung hält den harten Bedingungen im Einsatz und Wettkampf stand. Der selbstschmierende Polymer-Follower und die wärmebehandelte, präzise gewickelte Feder liefern zuverlässig und konstant 20 Schuss Munition. Der Stahlboden lässt sich leicht zur Reinigung entfernen. Passt auf DPMS Panther LR Seriengewehre (.243, .260, .308 Kaliber), Knight’s Armament SR-25, Remington R-25 (.308) und Stoner SR-25. Passt nicht auf das Armalite AR10.
SPECS: Stahl, wärmebehandelt, schwarze Oxidbeschichtung, Polymer-Follower, 20-Schuss Kapazität. 55⁄8 Zoll lang. Passt auf DPMS Panther LR Seriengewehre (.243, .260, .308 Kaliber), Knight SR-25, Remington R-25 (.308) und Stoner SR-25. Passt nicht auf das ArmaLite AR-10, Rock River Arms oder irgendein Gewehr, das ein FN/FAL Magazin verwendet.
Mehr...
Kundenbewertungen zu PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 3
Not Worth the $$(15.05.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.05.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.06.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.06.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.07.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.07.2013)
OK but a little balky in feeding.
Big fan!!!(19.04.2014)
LOVE IT
good mag for the price.(06.03.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(04.04.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.
Artikel-Nr.: 687000069 PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK Herstellerproduktnummer: DPM-A1708279010149 Robustes Stahlmagazin mit Phosphatbeschichtung hält den harten Bedingungen im Einsatz und Wettkampf stand. Der selbstschmierende Polymer-Follower und die wärmebehandelte, präzise gewickelte Feder liefern zuverlässig und konstant 20 Schuss Munition. Der Stahlboden lässt sich leicht zur Reinigung entfernen. Passt auf DPMS Panther LR Seriengewehre (.243, .260, .308 Kaliber), Knight’s Armament SR-25, Remington R-25 (.308) und Stoner SR-25. Passt nicht auf das Armalite AR10.
39.9CHF0CHF 39.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Eigenschaften:Action Type: Semi-AutoAufnahmevermögen: 20-RoundFinish: BlackHersteller/Modell: AR .308Material: SteelPatrone: 308 Winchester, 7.62 mm NATOMenge: 1
Bewilligung für Ladevorrichtung mit hoher Kapazität(Kopie der kantonale Ausnahmebewilligung oder eine Bestätigung des Besitzes)
Top Takeaways
Robustes Stahlmagazin mit Phosphatbeschichtung für Kampf- und Wettkampfbedingungen.
Selbstschmierenden Polymer-Follower und präzise gewickelte Feder für zuverlässige 20 Schuss.
Passt auf verschiedene DPMS Panther LR Modelle und Knight’s Armament SR-25, nicht auf Armalite AR10.
Eigenschaften
Action Type:
Semi-Auto
Finish:
Black
Hersteller/Modell:
AR .308
Kapazität:
20-Round
Material:
Steel
Patrone:
308 Winchester,7.62 mm NATO
Versandgewicht: 0.272kgVersandhöhe: 10mmVersandbreite: 114mmVersandlänge: 267mm
UPC
: 708279010149
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.d
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke das robuste AR .308 20RD MAGAZINE 🛠️ für zuverlässige Leistung in deinem DPMS oder Knight's Armament Gewehr. Ideal für Wettkämpfe!
Rugged steel, phosphate-treated magazine stands up to the harsh conditions of combat and competition. Self-lubricating polymer follower and heat-treated, precision-wound spring delivers 20 rounds of ammo reliably and consistently. Steel floorplate easily removes for cleaning. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight’s Armament SR-25, Remington R-25 (.308), and Stoner SR-25. Will not fit Armalite AR10.
SPECS: Steel, heat treated, black oxide finish, polymer follower, 20-round capacity. 55⁄8 long. Fits DPMS Panther LR series rifles (.243, .260, .308 caliber), Knight SR-25, Remington R-25 (.308), and Stoner SR-25. Does not fit the ArmaLite AR-10, Rock River Arms, or any rifle using an FN/FAL magazine.
Mehr...
Passt auf die meisten AR-Stil .308 Gewehrplattformen
Robustes Stahlmagazin mit Phosphatbeschichtung hält den harten Bedingungen im Einsatz und Wettkampf stand. Der selbstschmierende Polymer-Follower und die wärmebehandelte, präzise gewickelte Feder liefern zuverlässig und konstant 20 Schuss Munition. Der Stahlboden lässt sich leicht zur Reinigung entfernen. Passt auf DPMS Panther LR Seriengewehre (.243, .260, .308 Kaliber), Knight’s Armament SR-25, Remington R-25 (.308) und Stoner SR-25. Passt nicht auf das Armalite AR10.
SPECS: Stahl, wärmebehandelt, schwarze Oxidbeschichtung, Polymer-Follower, 20-Schuss Kapazität. 55⁄8 Zoll lang. Passt auf DPMS Panther LR Seriengewehre (.243, .260, .308 Kaliber), Knight SR-25, Remington R-25 (.308) und Stoner SR-25. Passt nicht auf das ArmaLite AR-10, Rock River Arms oder irgendein Gewehr, das ein FN/FAL Magazin verwendet.
Mehr...
Kundenbewertungen zu PRO MAG AR .308 MAGAZINE 308 WINCHESTER 20RD STEEL BLACK
Anzahl der Bewertungen: 9
Von brownells.com: 9
Durchschnittliche Bewertung: 3
Not Worth the $$(15.05.2013)
I have been in the shooting sport and firearms industry for close to 40 years. I have seen it all in my time. I own a LaRue ONB in 7.62mm, arguably, one of the best semi autos of all time. I ordered 3 of these 20 round magazines on Jan 4. Today, on 5/15/13 I received my order. All 3 magazines won't seat in the receiver without beating them in. The finish is rough as a cob like they were sandblasted with play ground sand. If anyone needs 3 Pro-Mag, DPMS 20round M110 magazines, check the auction sites because these 3 will be somewhere for sale in the next 24 hours.They are not fit for duty.
They work(25.05.2013)
I picked up 5 of these magazines for my 308 AR build only because they were the only magazines I could find (then and now). At first, the spring seemed weak and the bolt would only lock to the rear every other time the magazine was emptied. Now after a couple uses it locks to the rear every time. I've never had a misfeed either. It may be because the magazine seemed to be coated in a pretty heavy coat of grease when I opened the package and that may be finally wearing off, even after cleaning with CLP when I first got them. Overall not a bad magazine but there are definitely better ones out there. I wouldn't trust them in 3 gun competition but for normal range work they are more than fine.
They stick in my LWRC's mag well and jam(12.06.2013)
the followers are too small and tend to give tilt-type jams. By too small I mean teh forward edges tend to pop out over the mag body's retention "tabs".
These are nothing one would count on in a match
Good Mag and in stock(20.06.2013)
Worked fine in my DPMS sportico 308 and they have it in stock !
.308 magazine in m&p 10(15.07.2013)
I use it in my smith and Wesson m&p 10. it works great, does what it says, fits easily in my gun, locks the bolt to the rear after the last shot, haven't had any problems whatsoever, no double feeds or any malfunctions at all. the only reason I did not give this magazine 5 stars is when its fully loaded with rounds it makes this weird rattling sound when moved, that I would prefer it didn't make, other than that ill be buying a lot of these very soon.
OK IN m&p10(18.07.2013)
OK but a little balky in feeding.
Big fan!!!(19.04.2014)
LOVE IT
good mag for the price.(06.03.2017)
I used it at the range and they ran very well. I have a D.P.M.S. LR 308, and if you have one these mags are for you because the D.P.M.S. mags go for 40.00$ ea. One thing to note they take 19 rounds. If you try 20 it will not feed the first round. But with 19 all is well.
Bought 1 to evaluate(04.04.2018)
The magazine is well made with a smooth black phosphate finish. It looks almost OEM. Follower tilts. On a DPMS G2B24, it is a poor fit. Very difficult to insert and almost impossible to remove. Returned.