Timney’s engineers set out to create not only the ultimate AR- style trigger to the exacting specifications of some of the best multi-gun shooters in the world, but a trigger that can withstand a lifetime of competition. A self-contained, 100% drop-in, two-stage trigger ready to install for an exceptionally smooth, crisp, two-stage trigger pull. No gunsmithing, fitting, or adjusting required. The two-stage trigger’s pull weight: 1st stage is 8 ounces, and the 2nd stage is 1.5 pounds for a total combined pull weight of 2 pounds, and both stages are non-adjustable. The trigger housing is constructed of military-grade, 6061 T6 alloy that is CNC machined using state-of-the-art equipment and is anodized for superior durability. The trigger shoe is also CNC machined, then heat treated, and black oxide coated for a corrosion-resistant finish. While the sear and disconnect are wire EDM-cut from A2 tool steel, the hammer is wire EDM-cut from S7 tool steel, and all three parts are heat treated and Teflon-nickel coated for lubricity and long-lasting dependable service. SPECIFICATIONS: COMPATIBLE WITH: Mil-Spec AR lowers PULL WEIGHT: First stage: 8 oz / Second stage: 1.5 lbs. HOUSING: Anodized 6061 aluminum TRIGGER SHOE: Tool steel with black oxide coating DISCONNECT & SEAR: A2 tool steel with NP3 coating HAMMER: S7 tool steel with NP3 coating
Mehr...
429.9429.91CHF
Artikel-Nr.: 430110710 TIMNEY AR PRO 2 STAGE FLAT TRIGGER GRAY Herstellerproduktnummer: AR PRO081950277766
Made in USA
US-Exportklassifizierung: 0A501.c
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Timney’s engineers set out to create not only the ultimate AR- style trigger to the exacting specifications of some of the best multi-gun shooters in the world, but a trigger that can withstand a lifetime of competition. A self-contained, 100% drop-in, two-stage trigger ready to install for an exceptionally smooth, crisp, two-stage trigger pull. No gunsmithing, fitting, or adjusting required. The two-stage trigger’s pull weight: 1st stage is 8 ounces, and the 2nd stage is 1.5 pounds for a total combined pull weight of 2 pounds, and both stages are non-adjustable. The trigger housing is constructed of military-grade, 6061 T6 alloy that is CNC machined using state-of-the-art equipment and is anodized for superior durability. The trigger shoe is also CNC machined, then heat treated, and black oxide coated for a corrosion-resistant finish. While the sear and disconnect are wire EDM-cut from A2 tool steel, the hammer is wire EDM-cut from S7 tool steel, and all three parts are heat treated and Teflon-nickel coated for lubricity and long-lasting dependable service. SPECIFICATIONS: COMPATIBLE WITH: Mil-Spec AR lowers PULL WEIGHT: First stage: 8 oz / Second stage: 1.5 lbs. HOUSING: Anodized 6061 aluminum TRIGGER SHOE: Tool steel with black oxide coating DISCONNECT & SEAR: A2 tool steel with NP3 coating HAMMER: S7 tool steel with NP3 coating