Automatic case actuated drum powder measure. Accurately and automatically dispense powder in your favorite cartridge. Two infinitely adjustable drums included. These Quick Change drums will accurately and reliably drop charges from 1 to 80 grains of powder. Case Actuated Quick change hopper with on/off valve Handgun and Rifle drums included
Altro...
Misuratore di polvere a tamburo automatico azionato dal bossolo. Dosare con precisione e automaticamente la polvere nel tuo cartuccia preferita. Inclusi due tamburi regolabili all'infinito. Questi tamburi a cambio rapido scaricheranno con precisione e affidabilità cariche da 1 a 80 grani di polvere. Tramoggia a cambio rapido azionata dal bossolo con valvola on/off. Inclusi tamburi per pistola e fucile.
Altro...
Punteggi dei clienti per LEE PRECISION AUTO-DRUM POWDER MEASURE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 5
A dream for reloaders(19.10.2016)
This powder measure is incredible! Very easy to setup, inexpensive replaceable measurement drums that can be set and saved for any particular recipe. Has never wandered a powder charge, as verified by my Pact scale. Can be easily switched to automatically drop a charge on my CI Turret Press.
Works Fine with Lee ClassicTurret Press(14.11.2017)
Just got it in....used W231, TiteGroup, and Bullseye. All meter well, but TiteGroup leaks a tiny bit of powder on the top of the turret press. Not enough to cause any problems.
I was able to convert the large drum to a small with no problems. Loads are consistent, drums are interchangeable, and the price was reasonable.
Bought the auto-disk riser and extra drums too. Used on my powder thru expander die from Lee...There were no problems with case actuation or powder sticking.
My favorite powder dispenser(14.11.2017)
First off, I can't believe there is only 1 review on this product at the time of my writing. I've used this dispenser for the last year or so and every time I love it. The dispenser is just like the Lee Perfect Powder Measure (which I actually like) but with automation. The instructions have a method of setting the charge with a pre-weighed charge you want. Tweak the adjustment thimble as necessary with the provided key tool. The operation is so smooth compared to the Auto-Disk which sounds like a screen door opening due to the return spring on it. I own 3 of those but just one Auto-Drum since it sits on my .223 Rem turret setup. I did remove the safety disconnect that requires you to reset it after each drop, there are instructions with the product and YouTube videos on how to do it. For some it may by OK, but for my use on the Lee Turret press, it is redundant. Like I said, smooth but it is accurate and consistent. I weigh various samples during my .223 loading process and all of them come either on the dot or within +/- a tenth. That has been my experience. As the other reviewer stated, you can get multiple rifle and pistol drums for an inexpensive amount and write on them (they have a flat spot designed for labeling) so you can switch them out if you want to. I probably won't use that as mine is dedicated to one cartridge. One slight caveat, for .223 Rem it is right at the border of not working the drum rotation completely due to the length of the case in the long Lee rifle charging die. I did buy the short rifle charging die and that made a world of difference! Also, only set it up enough to just operate the drum and no more, otherwise you may shove the neck into the charging die and slightly crimp it which will make bullet-starting/seating a bit difficult. When done loading, the body area holds a relatively large amount of powder. You'll want to empty it, on my turret I can just shut off the hopper and remove, then lift the turret out of the press and dump it into the powder container, and after that I may run a spent case just to make sure it's all out. I hope this info helps.
N. prodotto: 100018937 LEE PRECISION AUTO-DRUM POWDER MEASURE Parti Fabbricante: 90811734307908119 Misuratore di polvere a tamburo automatico azionato dal bossolo. Dosare con precisione e automaticamente la polvere nel tuo cartuccia preferita. Inclusi due tamburi regolabili all'infinito. Questi tamburi a cambio rapido scaricheranno con precisione e affidabilità cariche da 1 a 80 grani di polvere. Tramoggia a cambio rapido azionata dal bossolo con valvola on/off. Inclusi tamburi per pistola e fucile.
74.9CHF47CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Automatic case actuated drum powder measure. Accurately and automatically dispense powder in your favorite cartridge. Two infinitely adjustable drums included. These Quick Change drums will accurately and reliably drop charges from 1 to 80 grains of powder. Case Actuated Quick change hopper with on/off valve Handgun and Rifle drums included
Altro...
Misuratore di polvere a tamburo automatico azionato dal bossolo. Dosare con precisione e automaticamente la polvere nel tuo cartuccia preferita. Inclusi due tamburi regolabili all'infinito. Questi tamburi a cambio rapido scaricheranno con precisione e affidabilità cariche da 1 a 80 grani di polvere. Tramoggia a cambio rapido azionata dal bossolo con valvola on/off. Inclusi tamburi per pistola e fucile.
Altro...
Punteggi dei clienti per LEE PRECISION AUTO-DRUM POWDER MEASURE
Numero di punteggi: 3
Da brownells.com: 3
Punteggio medio: 5
A dream for reloaders(19.10.2016)
This powder measure is incredible! Very easy to setup, inexpensive replaceable measurement drums that can be set and saved for any particular recipe. Has never wandered a powder charge, as verified by my Pact scale. Can be easily switched to automatically drop a charge on my CI Turret Press.
Works Fine with Lee ClassicTurret Press(14.11.2017)
Just got it in....used W231, TiteGroup, and Bullseye. All meter well, but TiteGroup leaks a tiny bit of powder on the top of the turret press. Not enough to cause any problems.
I was able to convert the large drum to a small with no problems. Loads are consistent, drums are interchangeable, and the price was reasonable.
Bought the auto-disk riser and extra drums too. Used on my powder thru expander die from Lee...There were no problems with case actuation or powder sticking.
My favorite powder dispenser(14.11.2017)
First off, I can't believe there is only 1 review on this product at the time of my writing. I've used this dispenser for the last year or so and every time I love it. The dispenser is just like the Lee Perfect Powder Measure (which I actually like) but with automation. The instructions have a method of setting the charge with a pre-weighed charge you want. Tweak the adjustment thimble as necessary with the provided key tool. The operation is so smooth compared to the Auto-Disk which sounds like a screen door opening due to the return spring on it. I own 3 of those but just one Auto-Drum since it sits on my .223 Rem turret setup. I did remove the safety disconnect that requires you to reset it after each drop, there are instructions with the product and YouTube videos on how to do it. For some it may by OK, but for my use on the Lee Turret press, it is redundant. Like I said, smooth but it is accurate and consistent. I weigh various samples during my .223 loading process and all of them come either on the dot or within +/- a tenth. That has been my experience. As the other reviewer stated, you can get multiple rifle and pistol drums for an inexpensive amount and write on them (they have a flat spot designed for labeling) so you can switch them out if you want to. I probably won't use that as mine is dedicated to one cartridge. One slight caveat, for .223 Rem it is right at the border of not working the drum rotation completely due to the length of the case in the long Lee rifle charging die. I did buy the short rifle charging die and that made a world of difference! Also, only set it up enough to just operate the drum and no more, otherwise you may shove the neck into the charging die and slightly crimp it which will make bullet-starting/seating a bit difficult. When done loading, the body area holds a relatively large amount of powder. You'll want to empty it, on my turret I can just shut off the hopper and remove, then lift the turret out of the press and dump it into the powder container, and after that I may run a spent case just to make sure it's all out. I hope this info helps.