Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

PRO MAG
BERETTA 92 9MM MAGAZINES

708279000027 687100092

Durable Replacements Made In The USA

Made from the finest materials for strength and durability. High carbon, steel bodies; chrome silicon music wire springs take a "set" and then resist gradual weakening over time. Followers and mag pads are injection molded from unbreakable polymer to stand up to rough treatment without cracking.

SPECS: Body - Steel, blued. Spring - Chrome silicon. Follower - Nylon polymer.

Mehr...

Langlebige Ersatzteile, hergestellt in den USA

Hergestellt aus den besten Materialien für Stärke und Haltbarkeit. Hochkohlenstoffstahl-Gehäuse; Chromsilizium-Musikdrahtfedern nehmen eine "Form" an und widerstehen dann einer allmählichen Schwächung im Laufe der Zeit. Follower und Magazin-Pads sind aus unzerbrechlichem Polymer spritzgegossen, um rauem Umgang standzuhalten, ohne zu brechen.

TECHNISCHE DATEN: Gehäuse - Stahl, brüniert. Feder - Chromsilizium. Follower - Nylon-Polymer.

Mehr...

Kundenbewertungen zu PRO MAG BERETTA 92 9MM, 10 RDS

Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 1.7

Unreliable (30.01.2014)

I purchased three magazines last year to replace my original Beretta units that have exhausted springs (spring replacement kits being unavailable.)

I short, these magazines just don't work. Rounds either jam or just don't feed. Occasionally the slide will cycle fully onto an empty chamber. I tested the old magazines (which still feed the first 5-6 rounds reliably) and they perform well. The ProMag units reduce my semi-automatic pistol to single-shot operation.

pro mag 10 rd. (25.12.2014)

I had the same feed problem with my 10 round mags they should be good for fishing weights.

OK but you can do better (07.02.2015)

I bought two of these mags when I got my 92FS. I did not have any issues with them initially and I do still use them. I had some issues at the range yesterday with mis-feeds, so I decided to clean them and check everything out. I also have two factory Beretta mags and one ex-USA mag. Each of the pro-mag units had a different spring in them! One spring was a lot better made than the other. Neither spring matched the factory or military mag. I am planning on still shooting with them, but my favorite mag is the mil surplus. They are heavier and appear to be of all metal components.

Can be made ok (05.01.2017)

I though it would be ok for target practice but right out of the box I noticed it was difficult to load. Disassembled and found the spring was completely mangled. It works fine now with a quality spring.

Pros:

Good metal case

Cheaper than factory

Cons:

Cheaper than factory

Cheap spring

Plastic floorplate (don't drop!)

Plastic floorplate retainer

Gap between floorplate and base of pistol

Don't Waste Your Money on these Losers (16.07.2016)

If you actually manage to get 10 rounds into this magazine, it will not seat and lock into the weapon unless the slide is open. The only way you can proceed is to carry 9 +1. So much for a "10 round" magazine. Upon pushing the mag release, you still have to manually pull the magazine out since gravity alone won't drop it. I bought 3 of these, and they're all no good. Even loading rounds into the magazine did not go smoothly. Never made it to the range test since these magazines failed at the bench. These particular ProMags are a complete disaster -- they have no place in any situation where your life is at stake. Utter unsafe JUNK.

Should have listened to Charlie Tuna (12.01.2018)

Iâm only giving three stars because 2 out of the three seem to load 10 and drop free okay. The third wonât even go into the gun itâs manufactured too wide and will be going back for an exchange. Also there arenât any holes to show how many rounds are in the mag. Probably gonna cost me more in postage than itâs worth.

Lesen Sie 6 weitere Bewertungen bei brownells.com

37.9 45.9 2 CHF

Artikel-Nr.: 687100092
PRO MAG BERETTA 92 9MM, 10 RDS
Herstellerproduktnummer: BER 01 708279000027 Hergestellt aus den besten Materialien für Stärke und Haltbarkeit. Hochkohlenstoffstahl-Gehäuse; Chromsilizium-Musikdrahtfedern nehmen eine "Form" an und widerstehen dann einer allmählichen Schwächung im Laufe der Zeit. Follower und Magazin-Pads sind aus unzerbrechlichem Polymer spritzgegossen, um rauem Umgang standzuhalten, ohne zu brechen.

45.9 CHF 5 CHF 45.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Aufnahmevermögen: 10-Round Finish: Black Hersteller/Modell: Beretta Material: Steel Modell: 92 Patrone: 9 mm Luger Menge: 1

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Hergestellt aus hochfestem Material für Stärke und Langlebigkeit.
Chrom-Silizium-Musikdrahtfedern widerstehen einer allmählichen Schwächung.
Follower und Mag-Pads aus unzerbrechlichem Polymer für hohe Robustheit.

Eigenschaften

Finish: Black Hersteller/Modell: Beretta Kapazität: 10-Round Material: Steel Modell: 92 Patrone: 9 mm Luger Versandgewicht: 0.113kg Versandhöhe: 30mm Versandbreite: 69mm Versandlänge: 241mm UPC : 708279000027

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.x

Artikel-Nr.: 687000009
PRO MAG BERETTA 92 9MM, 15 RDS
Herstellerproduktnummer: BER-A1 708279006265 Hergestellt aus den besten Materialien für Stärke und Haltbarkeit. Hochkohlenstoffstahl-Gehäuse; Chromsilizium-Musikdrahtfedern nehmen eine "Form" an und widerstehen dann einer allmählichen Schwächung im Laufe der Zeit. Follower und Magazin-Pads sind aus unzerbrechlichem Polymer spritzgegossen, um rauem Umgang standzuhalten, ohne zu brechen.

37.9 CHF 3 CHF 37.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Aufnahmevermögen: 15-Round Finish: Black Hersteller/Modell: Beretta Material: Steel Modell: 92, Beretta 92 & 96 Magazines Patrone: 9 mm Luger Menge: 1

Auf die Wunschliste setzen

Frage stellen