Sophisticated Solvents That Take The Chore Out Of Bore Cleaning
Technologically advanced, 100% biodegradable formula is environmentally safe, yet strong enough to remove the toughest carbon, lead, and moly fouling in just seconds. Ideal for rifle barrels, bolt faces, flash suppressors, compensators, silencers, chamber throats, revolver cylinders, gas pistons and any other place extreme carbon fouling is found. Will also neutralize and remove corrosive salts found in surplus military ammunition and black powder. Deep cleaning action easily penetrates the smallest crevices and other hard-to-reach areas, leaving heavily fouled parts looking factory new. For really stubborn fouling just soak in C4 Carbon Remover for a few minutes, then wipe or patch dry. Conditions the metal to help prevent future build-up. Non-flammable, ordorless, ammonia free solution is safe for indoor use.
SPECS: 4 fl. oz. (118 ml) squeeze bottle or 16 fl. oz. (473 ml) plastic bottle.
Plus...
Solvants sophistiqués qui rendent le nettoyage des canons un jeu d'enfant
Formule technologiquement avancée, 100 % biodégradable, respectueuse de l'environnement et suffisamment puissante pour éliminer les dépôts de carbone, de plomb et de moly les plus tenaces en quelques secondes. Idéale pour les canons de fusil, les faces de verrou, les caches-flammes, les compensateurs, les silencieux, les gorges de chambre, les cylindres de revolver, les pistons à gaz et tout autre endroit où l'on trouve des dépôts de carbone extrêmes. Neutralise également et élimine les sels corrosifs présents dans les munitions militaires surplus et la poudre noire. L'action de nettoyage en profondeur pénètre facilement les plus petites crevasses et autres zones difficiles d'accès, laissant les pièces très encrassées comme neuves. Pour les dépôts vraiment tenaces, il suffit de faire tremper dans le C4 Carbon Remover pendant quelques minutes, puis d'essuyer ou de sécher avec un patch. Conditionne le métal pour aider à prévenir l'accumulation future. Solution non inflammable, inodore et sans ammoniaque, sûre pour une utilisation en intérieur.
SPÉCIFICATIONS : bouteille squeeze de 4 fl. oz. (118 ml) ou bouteille en plastique de 16 fl. oz. (473 ml).
Plus...
Évaluations client de BORE TECH 4 OZ. C4 CARBON REMOVER
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
Works Great!(16.03.2011)
I use this on all of my guns (pistols and rifles). It breaks up carbon like nothing I've used before! It really does a nice job on the Bolt/Carrier Group in my AR-15. I just soak it with C4 and let it sit for a bit. The carbon just wipes off.
The wife doesn't even complain when I'm cleaning at the kitchen table becuase there is no odor.
Best I've found for carbon removal.(22.04.2015)
C4 is the best product for cutting carbon that I have found. I used C4 to clean a 7.62x39 AR after firing 500+ rounds of cheap imported steel case ammo. The rifle was still completely functional but you can imagine what the bolt and carrier looked like. Nothing is going to cut through all that baked on mess so I first used an OTIS B.O.N.E. Bolt Carrier & Pin Cleaning Tool to remove the bulk carbon. Then I used C4 with steel wool and a wire brush to get the rest of the mess. Soaking the parts may have worked too, but I only had one small bottle. C4 worked better than the other gun/bore cleaning products I had on hand.
It smells a little like oranges and doesn't bother my hands.
C4 Carbon remover is amazing(21.03.2017)
Recently purchased this C4 carbon remover to clean a S&W .460 revolver. With loads for it running in the 60,000cup pressure range the carbon is pretty well "baked on" surfaces. It is absolutely amazing, works exactly as advertised and removes carbon build up from revolver cylinders, cylinder face, between barrel & top strap as well as other hard to clean areas with minimal "scrubbing". As directions state, "leave hard to clean areas soak for a few minutes" and you will have no problems. Retired law enforcement and competitive shooter that has used a variety of products over many years, I would highly recommend this product.
Outstanding Carbon remover(26.02.2018)
Every revolver shooter will love this product. I bought it for the sole purpose to remove the very stubborn carbon fouling on the end of the revolver cylinder and top strap. After removing the cylinder I cut a small hole in a large patch and placed it over the ejection rod so the patch covered the front face. With the cylinder sitting upright I soaked the patch with the product and let it sit overnight. The next morning I was able to wipe the carbon off with a Q-tip !!! No scrubbing needed that might damage the cylinder exit ports. I found it works best if you let the chemical soak into the carbon. Don't expect magical results in a few seconds.
The second area was the carbon build-up inside the cylinder. I wadded a patch into each of the six cavities and again soaked the patches and let set. A couple of strokes with a bore brush and patches and it was clean.
Best carbon remover(06.07.2015)
The best cleaning solution that I have found to clean a suppressor. Left my ACC Tirant45S parts in the solution for several days and used a toothbrush to brush off the carbon, no chipping or scraping the parts.
The best for old carbon build up(15.01.2016)
Had very heavy, 3-years-old, carbon build up in a piston-system AR-style rifle (from ~1000 rounds during a 2-day class) and a pump shotgun (from ~250 rounds during the same class). I left the worst parts soaking, completely submerged, for 1 week in another product that is currently touted as the super duper carbon removing product on the market. That vegetable based so called CLP did not even soften the carbon one bit. Nothing. Zero.
I then decided to try Bore Tech C4. After soaking overnight the results were impressive to say the least. Thin carbon fouling wiped right off. Thicker deposits took some work with a soft brush, but everything eventually came off. Great product.
Like Magic!(08.08.2017)
Of all of the carbon solvents I have tried (and I have tried many, both old school and new school) this is simply the best of the best. It has a slight orange-ish scent to it and doesn't irritate your skin like a lot of old school cleaners like Hoppe's. For someone like me who wears contact lenses, this is really important as solvents like Hoppe's contain kerosene and petroleum distillates which don't wash off the hands nicely, even with alcohol-based hand sanitizer. What this means is that I can ruin a pair of contacts by using said solvent. With this stuff no worries, it washes off with hand soap and is like the Dawn of guns, it cleans what no other solvent will and without being harmful to the user.
Référence: 509350040 BORE TECH 4 OZ. C4 CARBON REMOVER Ref Fabricant: BTCC-35004667739980050 Formule technologiquement avancée, 100 % biodégradable, respectueuse de l'environnement et suffisamment puissante pour éliminer les dépôts de carbone, de plomb et de moly les plus tenaces en quelques secondes. Idéale pour les canons de fusil, les faces de verrou, les caches-flammes, les compensateurs, les silencieux, les gorges de chambre, les cylindres de revolver, les pistons à gaz et tout autre endroit où l'on trouve des dépôts de carbone extrêmes. Neutralise également et élimine les sels corrosifs présents dans les munitions militaires surplus et la poudre noire. L'action de nettoyage en profondeur pénètre facilement les plus petites crevasses et autres zones difficiles d'accès, laissant les pièces très encrassées comme neuves. Pour les dépôts vraiment tenaces, il suffit de faire tremper dans le C4 Carbon Remover pendant quelques minutes, puis d'essuyer ou de sécher avec un patch. Conditionne le métal pour aider à prévenir l'accumulation future. Solution non inflammable, inodore et sans ammoniaque, sûre pour une utilisation en intérieur.
36.9CHF496CHF 36.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Formule 100 % biodégradable et respectueuse de l'environnement, idéale pour éliminer les dépôts de carbone.
Nettoie en profondeur les canons de fusil et autres pièces, laissant tout comme neuf.
Solution non inflammable et sans odeur, parfaite pour une utilisation en intérieur.
Caractéristiques
Taille:
4 oz
Poids du colis: 0.113kgHauteur d'expédition: 97mmLargeur d'expédition: 43mmLongueur d'expédition: 41mm
UPC
: 667739980050
Détails de l'article
Fabriqué au USA
Référence: 509350160 BORE TECH 16 OZ. C4 CARBON REMOVER Ref Fabricant: BTCC-35016667739980067 Formule technologiquement avancée, 100 % biodégradable, respectueuse de l'environnement et suffisamment puissante pour éliminer les dépôts de carbone, de plomb et de moly les plus tenaces en quelques secondes. Idéale pour les canons de fusil, les faces de verrou, les caches-flammes, les compensateurs, les silencieux, les gorges de chambre, les cylindres de revolver, les pistons à gaz et tout autre endroit où l'on trouve des dépôts de carbone extrêmes. Neutralise également et élimine les sels corrosifs présents dans les munitions militaires surplus et la poudre noire. L'action de nettoyage en profondeur pénètre facilement les plus petites crevasses et autres zones difficiles d'accès, laissant les pièces très encrassées comme neuves. Pour les dépôts vraiment tenaces, il suffit de faire tremper dans le C4 Carbon Remover pendant quelques minutes, puis d'essuyer ou de sécher avec un patch. Conditionne le métal pour aider à prévenir l'accumulation future. Solution non inflammable, inodore et sans ammoniaque, sûre pour une utilisation en intérieur.
79.9CHF236CHF 79.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Formule 100 % biodégradable et respectueuse de l'environnement, mais puissante contre les dépôts de carbone et de plomb.
Idéale pour une variété d'armes, y compris les canons de fusil et les silencieux, nettoie en profondeur les zones difficiles d'accès.
Solution non inflammable, sans odeur et sans ammoniaque, parfaite pour une utilisation en intérieur.
Caractéristiques
Taille:
16 oz
Poids du colis: 0.59kgHauteur d'expédition: 762mmLargeur d'expédition: 84mmLongueur d'expédition: 86mm
UPC
: 667739980067
Détails de l'article
Fabriqué au USA
Éliminez facilement les dépôts de carbone avec le C4 Carbon Remover 🌿. Formule biodégradable, efficace sur tous types de pièces. Commandez maintenant !
Sophisticated Solvents That Take The Chore Out Of Bore Cleaning
Technologically advanced, 100% biodegradable formula is environmentally safe, yet strong enough to remove the toughest carbon, lead, and moly fouling in just seconds. Ideal for rifle barrels, bolt faces, flash suppressors, compensators, silencers, chamber throats, revolver cylinders, gas pistons and any other place extreme carbon fouling is found. Will also neutralize and remove corrosive salts found in surplus military ammunition and black powder. Deep cleaning action easily penetrates the smallest crevices and other hard-to-reach areas, leaving heavily fouled parts looking factory new. For really stubborn fouling just soak in C4 Carbon Remover for a few minutes, then wipe or patch dry. Conditions the metal to help prevent future build-up. Non-flammable, ordorless, ammonia free solution is safe for indoor use.
SPECS: 4 fl. oz. (118 ml) squeeze bottle or 16 fl. oz. (473 ml) plastic bottle.
Plus...
Solvants sophistiqués qui rendent le nettoyage des canons un jeu d'enfant
Formule technologiquement avancée, 100 % biodégradable, respectueuse de l'environnement et suffisamment puissante pour éliminer les dépôts de carbone, de plomb et de moly les plus tenaces en quelques secondes. Idéale pour les canons de fusil, les faces de verrou, les caches-flammes, les compensateurs, les silencieux, les gorges de chambre, les cylindres de revolver, les pistons à gaz et tout autre endroit où l'on trouve des dépôts de carbone extrêmes. Neutralise également et élimine les sels corrosifs présents dans les munitions militaires surplus et la poudre noire. L'action de nettoyage en profondeur pénètre facilement les plus petites crevasses et autres zones difficiles d'accès, laissant les pièces très encrassées comme neuves. Pour les dépôts vraiment tenaces, il suffit de faire tremper dans le C4 Carbon Remover pendant quelques minutes, puis d'essuyer ou de sécher avec un patch. Conditionne le métal pour aider à prévenir l'accumulation future. Solution non inflammable, inodore et sans ammoniaque, sûre pour une utilisation en intérieur.
SPÉCIFICATIONS : bouteille squeeze de 4 fl. oz. (118 ml) ou bouteille en plastique de 16 fl. oz. (473 ml).
Plus...
Évaluations client de BORE TECH 4 OZ. C4 CARBON REMOVER
Nombre d'évaluations: 7
De brownells.com: 7
Note moyenne: 5
Works Great!(16.03.2011)
I use this on all of my guns (pistols and rifles). It breaks up carbon like nothing I've used before! It really does a nice job on the Bolt/Carrier Group in my AR-15. I just soak it with C4 and let it sit for a bit. The carbon just wipes off.
The wife doesn't even complain when I'm cleaning at the kitchen table becuase there is no odor.
Best I've found for carbon removal.(22.04.2015)
C4 is the best product for cutting carbon that I have found. I used C4 to clean a 7.62x39 AR after firing 500+ rounds of cheap imported steel case ammo. The rifle was still completely functional but you can imagine what the bolt and carrier looked like. Nothing is going to cut through all that baked on mess so I first used an OTIS B.O.N.E. Bolt Carrier & Pin Cleaning Tool to remove the bulk carbon. Then I used C4 with steel wool and a wire brush to get the rest of the mess. Soaking the parts may have worked too, but I only had one small bottle. C4 worked better than the other gun/bore cleaning products I had on hand.
It smells a little like oranges and doesn't bother my hands.
C4 Carbon remover is amazing(21.03.2017)
Recently purchased this C4 carbon remover to clean a S&W .460 revolver. With loads for it running in the 60,000cup pressure range the carbon is pretty well "baked on" surfaces. It is absolutely amazing, works exactly as advertised and removes carbon build up from revolver cylinders, cylinder face, between barrel & top strap as well as other hard to clean areas with minimal "scrubbing". As directions state, "leave hard to clean areas soak for a few minutes" and you will have no problems. Retired law enforcement and competitive shooter that has used a variety of products over many years, I would highly recommend this product.
Outstanding Carbon remover(26.02.2018)
Every revolver shooter will love this product. I bought it for the sole purpose to remove the very stubborn carbon fouling on the end of the revolver cylinder and top strap. After removing the cylinder I cut a small hole in a large patch and placed it over the ejection rod so the patch covered the front face. With the cylinder sitting upright I soaked the patch with the product and let it sit overnight. The next morning I was able to wipe the carbon off with a Q-tip !!! No scrubbing needed that might damage the cylinder exit ports. I found it works best if you let the chemical soak into the carbon. Don't expect magical results in a few seconds.
The second area was the carbon build-up inside the cylinder. I wadded a patch into each of the six cavities and again soaked the patches and let set. A couple of strokes with a bore brush and patches and it was clean.
Best carbon remover(06.07.2015)
The best cleaning solution that I have found to clean a suppressor. Left my ACC Tirant45S parts in the solution for several days and used a toothbrush to brush off the carbon, no chipping or scraping the parts.
The best for old carbon build up(15.01.2016)
Had very heavy, 3-years-old, carbon build up in a piston-system AR-style rifle (from ~1000 rounds during a 2-day class) and a pump shotgun (from ~250 rounds during the same class). I left the worst parts soaking, completely submerged, for 1 week in another product that is currently touted as the super duper carbon removing product on the market. That vegetable based so called CLP did not even soften the carbon one bit. Nothing. Zero.
I then decided to try Bore Tech C4. After soaking overnight the results were impressive to say the least. Thin carbon fouling wiped right off. Thicker deposits took some work with a soft brush, but everything eventually came off. Great product.
Like Magic!(08.08.2017)
Of all of the carbon solvents I have tried (and I have tried many, both old school and new school) this is simply the best of the best. It has a slight orange-ish scent to it and doesn't irritate your skin like a lot of old school cleaners like Hoppe's. For someone like me who wears contact lenses, this is really important as solvents like Hoppe's contain kerosene and petroleum distillates which don't wash off the hands nicely, even with alcohol-based hand sanitizer. What this means is that I can ruin a pair of contacts by using said solvent. With this stuff no worries, it washes off with hand soap and is like the Dawn of guns, it cleans what no other solvent will and without being harmful to the user.