Über 300.000 Kunden - wir sagen Danke!

40,000+ Produkte aus Jagd und Schiesssport

EGW
EAA SUPER SIGHT LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114238 296000682
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
79.9 79.9 1 CHF
Artikel-Nr.: 296000682
EGW EAA SUPER SIGHT MOUNT FOR LEUPOLD DELTA POINT PRO BLACK
Herstellerproduktnummer: 49407 841370114238
79.9 CHF 2 CHF 79.90 *
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften: Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: EAA Material: Aluminum Modell: Hunter, P Match Pro, P Match, Stock II Xtreme, Elite Stock II, Limite Custom Xtreme

Eigenschaften

Art: Tactical Basenanzahl: 1-Piece Farbe: Black Hersteller/Modell: EAA Material: Aluminum Modell: Elite Stock II,Limite Custom Xtreme,P Match,P Match Pro,Stock II Xtreme,Hunter Versandgewicht: 0.045kg Versandhöhe: 25mm Versandbreite: 76mm Versandlänge: 140mm UPC : 841370114238

Artikeldetails

Made in USA




EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight Hunter with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Match Elite with adjustable (LPA/Bomar style, shown above) rear sight Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight P Match with adjustable (LPA/Bomar style, shown above) rear sight P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight This mount does not fit: EAA / Tanfoglio Witness with fixed rear sight EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
Zurück nach oben