All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Mehr...
Alle Foolproof-Visiere (ausser TK-Modelle) verwenden den kurzen Höhenverstellknopf. Der lange Höhenverstellknopf ist für die Verwendung mit Foolproof-TK-Zielvisieren gedacht. Der Höhenverstellknopf mit Gib-Verriegelung passt sowohl zu den Standard-Foolproof- als auch zu den Foolproof-TK-Modellen.
TECHNISCHE DATEN: Aluminium, schwarz, anodisiert. Stahlschrauben. Dies kann eine Anpassung erfordern, indem die Spitze der Gewinde geschliffen wird, um zu einigen Visieren zu passen.
Mehr...
Kundenbewertungen zu WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Artikel-Nr.: 962000079 WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB005350616130 Alle Foolproof-Visiere (ausser TK-Modelle) verwenden den kurzen Höhenverstellknopf. Der lange Höhenverstellknopf ist für die Verwendung mit Foolproof-TK-Zielvisieren gedacht. Der Höhenverstellknopf mit Gib-Verriegelung passt sowohl zu den Standard-Foolproof- als auch zu den Foolproof-TK-Modellen.
Artikel-Nr.: 962157250 WILLIAMS GUN SIGHT TARGET ELEVATION KNOB, SHORT Herstellerproduktnummer: 11524053506115242 Alle Foolproof-Visiere (ausser TK-Modelle) verwenden den kurzen Höhenverstellknopf. Der lange Höhenverstellknopf ist für die Verwendung mit Foolproof-TK-Zielvisieren gedacht. Der Höhenverstellknopf mit Gib-Verriegelung passt sowohl zu den Standard-Foolproof- als auch zu den Foolproof-TK-Modellen.
All Foolproof sights (except TK models) use the Short Elevation Knob. The Long Elevation Knob is for use with Foolproof-TK target sights. The Elevation Gib Lock Knob fits both standard Foolproof and Foolproof-TK models
SPECS: Aluminum, black, anodized. Steel screws. This may require fitting by grinding the tip of the threads to fit some sights.
Mehr...
Alle Foolproof-Visiere (ausser TK-Modelle) verwenden den kurzen Höhenverstellknopf. Der lange Höhenverstellknopf ist für die Verwendung mit Foolproof-TK-Zielvisieren gedacht. Der Höhenverstellknopf mit Gib-Verriegelung passt sowohl zu den Standard-Foolproof- als auch zu den Foolproof-TK-Modellen.
TECHNISCHE DATEN: Aluminium, schwarz, anodisiert. Stahlschrauben. Dies kann eine Anpassung erfordern, indem die Spitze der Gewinde geschliffen wird, um zu einigen Visieren zu passen.
Mehr...
Kundenbewertungen zu WILLIAMS GUN SIGHT TARGET ELEVATION GIB LOCK KNOB
Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 4.5
Fits well, but long(27.11.2011)
This screw is for some reason about 1/8th inch too long (same for the one for my FP788-TK). Either hacksaw or grind off the extra length to match the stock gib lock screw and it fits perfect. If it wasn't for the slight annoyance with trimming it to length, I'd give it a 5.
Not for ruger 77(04.06.2016)
The short windage screw is too short for the fp model sight designed for the ruger 77 rifles. I returned it for the long instead, great quality and easy installation , and great service from brownells. The short elevation screw is correct for this same sight though, maybe this can save somebody the extra shipping I paid for my mistake ð
Perfect fit to Upgrade w/Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.
Exact fit to upgrade to Target Knobs(27.11.2011)
Installing these are as simple as backing out the small locking screws, then screwing the existing elevation screw in until it forces the screw out past the detent ball. To install, push the Target Knob into the screw hole until it seats the detent ball. Tighten up the locking screw to taste and that's it.