MAGPUL
FORWARD SLING MOUNT MOSSBERG 500/590 & REMINGTON 870

873750007854 100010976

The Forward Sling Mount is a sling attachment point for the Mossberg 500/590 and Remington 870 series' of shotguns which clamps onto the barrel and extended magazine tube. It can be configured for use with either Push Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip, the HK Hook, ITW Mash Hook, and others. Made from precision cast steel that is Melonite treated for wear and corrosion resistance.

Mehr...

Der Forward Sling Mount ist ein Sling-Befestigungspunkt für die Mossberg 500/590 und Remington 870 Serie von Schrotflinten, der am Lauf und dem verlängerten Magazinrohr befestigt wird. Er kann entweder für Push Button QD Sling Swivels oder für einpunktige Clip-in-Befestigungen wie den MS3 Paraclip, den HK Hook, den ITW Mash Hook und andere konfiguriert werden. Hergestellt aus präzisionsgegossenem Stahl, der mit Melonite behandelt wurde, um Abnutzung und Korrosion zu widerstehen.

Mehr...

Kundenbewertungen zu MAGPUL FORWARD SLING MOUNT CLAMP-ON FOR MOSSBERG 500/590 & REM 870

Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 4

Excellent piece of kit! (02.12.2012)

I had been waiting for this since the release of the SGA 870 buttstock. Easy install on an 870 equipped with a magazine extension. Magpul includes self adhesive silicone pads that are installed in cast recesses in the clamps and bear against the barrel and extension surfaces. Nice touch as I usually have to use electrical tape. If you just want to use the clamp without the HK snap link hook Magpul includes the nuts required to lock the clamping screw in place. Double check with Magpul but it appears to be compatible with ball bearing push button sling swivels as well.

Just for grins I did some test fits on a Mossberg 500 and 590A1. As expected it did not fit and it did not appear some judicious Dremel tool work would help.

All in all a great piece of Magpul kit.

Nice clamp, may not fit your setup (14.01.2013)

I purchased this clamp to mount to an 870 Police Magnum with a Wilson Combat 2+ mag ext. tube. This clamp did not fit this combination. The spacing between the barrel and ext. tube was too small.

However, this clamp did fit perfectly onto the same 870 Police Magnum when used with a Remington 2+ ext. tube.

The outer diameter of the Remington ext. tube is slightly smaller than that of the Wilson Combat ext. tube.

I'm rating this item a 3 for lack of published specifications regarding the supported barrel and ext. tube diameter combinations.

Rock Solid (15.01.2013)

I bought this clamp because the clamp that came with my magazine extension didn't fit right. This clamp is well made and fits perfectly. The included pads will not prevent marks on your barrel from the clamp, but they do keep the clamp in place under recoil. A hex nut was included if you don't want the sling mount. Highly recomended.

May or may not work (10.01.2014)

I was excited about this product when I first saw it. As an armorer for a law enforcement agency I had been looking for a forward sling attachment that worked with a QD sling attachment. The Magpul mount fit the bill without the mass of some other mounts. It worked very well on some shotguns. I have numerous 870s in inventory with some more than 20 years old. We also have a variety of magazine extensions. As previously mentioned in a review this product will not work with every barrel/extension combination. I checked the outside dimensions of the extensions and barrel (factory barrels) with a micrometer. There is a variation in the dimensions of both the barrels and the extensions.

Bottom line is if its fits on your barrel/extension combination then it is a great product.

Great product, but won't fit "X" bbls (19.06.2014)

This is a well-designed, reasonably-priced sling mount for the 870. Unfortunately, it doesn't fit the newer barrels meant to be used with "X" marked mag extension clamps. These have less standoff between the barrel and magazine tube. Would've worked great for my old setup, but wouldn't fit my newer barrel.

Lesen Sie 5 weitere Bewertungen bei brownells.com

59.9 59.9 1 CHF

Artikel-Nr.: 100010976
MAGPUL FORWARD SLING MOUNT CLAMP-ON FOR MOSSBERG 500/590 & REM 870
Herstellerproduktnummer: MAG508-BLK 873750007854 Der Forward Sling Mount ist ein Sling-Befestigungspunkt für die Mossberg 500/590 und Remington 870 Serie von Schrotflinten, der am Lauf und dem verlängerten Magazinrohr befestigt wird. Er kann entweder für Push Button QD Sling Swivels oder für einpunktige Clip-in-Befestigungen wie den MS3 Paraclip, den HK Hook, den ITW Mash Hook und andere konfiguriert werden. Hergestellt aus präzisionsgegossenem Stahl, der mit Melonite behandelt wurde, um Abnutzung und Korrosion zu widerstehen.

59.9 CHF 21 CHF 59.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Shotgun Mount Farbe: Black Hersteller/Modell: Remington Material: Steel Modell: 870

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Forward Sling Mount ist ideal für die Mossberg 500/590 und Remington 870 Flinten.
Er bietet vielseitige Befestigungsmöglichkeiten für Push Button QD Sling Swivels und Einpunkt-Clip-in-Befestigungen.
Hergestellt aus präzisionsgegossenem Stahl mit Melonite-Beschichtung für hohe Verschleiss- und Korrosionsbeständigkeit.

Eigenschaften

Art: Shotgun Mount Farbe: Black Hersteller/Modell: Remington Material: Steel Modell: 870 Versandgewicht: 0.095kg Versandhöhe: 32mm Versandbreite: 114mm Versandlänge: 191mm UPC : 873750007854