The Foundation for a Superb D.I.Y. Pistol - Ergonomically Enhanced for Excellent Control
Our Iron Sight Slide for Glock 17® Gen3 enables you to build a custom Glock®-style pistol - or rebuild an old one - with a slide that sports distinctive customized cocking serrations. The unique front serrations aid in manipulating the slide under stress, especially for quick chamber checks AND for clearing the occasional jam. Both the front and rear serrations are cut to the same depth as the Glock® factory slide serrations to ensure no loss in overall slide rigidity. The top edges and the front around the muzzle area are chamfered to reduce the risk of snagging on clothing and to make holstering the pistol easier. Like all Brownells slides, the Iron Sight model for Gen3 Glock® 17 is precision machined from solid 17-4 stainless steel billet to factory specifications inside so it is compatible with any factory or aftermarket Gen3 internal components. Outside, there's a Glock® factory rear sight dovetail and front sight tenon cut ready for any factory or aftermarket sights you choose. This is the perfect companion "top-half" for a custom pistol built on a Polymer80 80% frame. Accepts Gen3 Glock® 17 internal parts Sturdy machined 17-4 stainless steel Tough matte Black Nitride finish Factory cuts for iron sights Channel liner not included; please order separately (see note below) Window model available You can get your Brownells Iron Sight Slide for Gen3 Glock® 17 with a solid top and distinctive wraparound front cocking serrations - swipe your paw along the front of the slide and you can't avoid racking it. The Iron Sight slide is also available with a window cutout on top between the front side serrations. The window aids in heat dissipation to keep the barrel cool during extended fire, AND if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) it'll help your gun stand out from the matte black sameness on the firing line! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Mehr...
Die Grundlage für eine hervorragende D.I.Y. Pistole - Ergonomisch verbessert für ausgezeichnete Kontrolle
Unser Iron Sight Slide für Glock 17® Gen3 ermöglicht es dir, eine benutzerdefinierte Glock®-Stil-Pistole zu bauen oder eine alte zu reparieren - mit einem Schlitten, der markante, individuell gestaltete Riegelrillen aufweist. Die einzigartigen vorderen Rillen helfen dabei, den Schlitten unter Druck zu bedienen, insbesondere für schnelle Kammerprüfungen und um gelegentliche Störungen zu beheben. Sowohl die vorderen als auch die hinteren Rillen sind auf die gleiche Tiefe wie die Rillen des Glock®-Werksschlittens geschnitten, um sicherzustellen, dass die Gesamtrigidität des Schlittens nicht verloren geht. Die oberen Kanten und der vordere Bereich um die Mündung sind abgeschrägt, um das Risiko des Hängens an Kleidung zu verringern und das Holstern der Pistole zu erleichtern. Wie alle Brownells-Schlitten ist das Iron Sight-Modell für Gen3 Glock® 17 präzise aus solidem 17-4 Edelstahl-Billet nach Werksspezifikationen gefertigt, sodass es mit allen Werksteilen oder Nachrüstteilen der Gen3 kompatibel ist. Aussen gibt es eine Glock®-Werkshintervisier-Dovetail und einen vorderen Visierstift, bereit für alle Werk- oder Nachrüstvisiere, die du wählst. Dies ist der perfekte Begleiter "Oberteil" für eine benutzerdefinierte Pistole, die auf einem Polymer80 80%-Rahmen gebaut ist. Akzeptiert Gen3 Glock® 17 Innenteile Robustes, gefrästes 17-4 Edelstahl-Hartbeschichtung in mattem Schwarz Werksschnitte für Eisenvisiere Kanalverkleidung nicht enthalten; bitte separat bestellen (siehe Hinweis unten) Fenster-Modell verfügbar Du kannst deinen Brownells Iron Sight Slide für Gen3 Glock® 17 mit einem soliden Oberteil und markanten, umlaufenden vorderen Riegelrillen erhalten - streiche mit deiner Hand über die Vorderseite des Schlittens und du kannst es nicht vermeiden, ihn zu spannen. Der Iron Sight-Schlitten ist auch mit einem Fenster-Ausschnitt oben zwischen den vorderen Seitenrillen erhältlich. Das Fenster hilft bei der Wärmeableitung, um den Lauf während des längeren Feuerns kühl zu halten, und wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen äusseren Muster (Riffelung, Spiralen, "Flammen" usw.) hast, wird deine Waffe aus der mattschwarzen Eintönigkeit auf der Schiessbahn herausstechen! Brownells Gun Tech™ Hinweis: Kanalverkleidung erforderlich für diese Schlitten. Kanalverkleidung ist ein Presspass und erfordert ein Werkzeug zur Installation. Wir empfehlen #777-100-017.
Mehr...
Kundenbewertungen zu BROWNELLS IRON SIGHT SLIDE +WINDOW GEN3 GLOCK® 17 STAINLESS NITRIDE
Anzahl der Bewertungen: 20
Von brownells.com: 20
Durchschnittliche Bewertung: 4.1
Brownell's Glock 17 Slide(07.10.2017)
I purchased this slide to top off a Polymer80 lower build. The fit and finish of the slide is excellent. The slide takes all of the original slide internals and the stock Glock night sights fit like a glove. The front and rear serrations provide for a secure way to manipulate the slide with no slipping of the hand when hot, cold, wet or dry,.
I have only one slight problem with the slide. When attaching the Glock front sight, the relief machined for the front sight screw was not enough to snug the screw down properly using a standard
or even with a thin walled driver. I sent Brownell's a picture and recommended they cut a little more radius.
I am pleased with my choice of slide and will be making another purchase for my Glock 19
JUST ORDERED #2! Great price/quality (19.01.2018)
I ordered this to top off my P80 full size, and it works PERFECTLY. All standard Glock parts went right in. The channel liner is a little snug but it does fit. It takes a little finagling to get it started. But it does fit. So get a liner tool and donât give up.
Other than that itâs PERFECT! Fit and function is great.
Finished slide assembly, lubed the rails, slid it on my V2 P80, racked it, slid back and forth the way it should, went out and loaded it, pulled the trigger and BOOM! Pulled the trigger again and BOOM! and AGAIN and AGAIN and AGAIN and about 100 more times. No Cycling issues no firing issues no ejecting issues. Absolutely AWESOME!
So for the money $164.99 on sale, you CANT beat it!
So what are you waiting for? Pull the trigger on this slide already, you WONT REGRET IT! I donât and I just bought another.
So you better hurry before these say âOUT OF STOCKâ or they go back to normal price!
Also one more thing, I also recommend the Brownells Victory first Threaded G17 barrel. Which is also on sale right now. I ordered two of those too.
They fit and function great with this slide, plus theyâre accurate, made of 416R stainless, nitrided, and CHEAP! $117.99
And the Glock Night sight set 6.5mm work good with this slide. Tritium insets and theyâre made of steel. $67
Pretty Happy(07.03.2018)
This slide looks awesome! For the price you absolutely canât beat it. I only have one issue with it which is the extractor plunger hole is way too tight. I read some other reviews and saw a couple people had the same issue but it sounds like a little sandpaper will fix that. Otherwise Iâm very impressed. The serrations are deep and pretty sharp. Definitely sharper than on the OEM slides but itâs not an issue. I really like the top cut as well.
Great Slide...(03.04.2018)
A great slide with nice, no nonsense features at a great price. All the parts swapped over easily without any issues. The chamfered edges are even and pleasing to the eye. The front and rear serrations are sharp and add more grip, but not overly aggressive. The black nitride coating was even and I didn't see any machining marks on the slide.
Slide is tight no wobble looks great on my gun and went together like a dream only thing I noticed I would like to bring up is that before installing the channel liner you need to take a qtip with Alcohol and clean the channel befor installing channel liner I crushed the first channel liner than cleaned it real good and it slid right into place second try would definitely recommend
great slide at a great price(21.05.2018)
Looks good works well. Needed to order a channel sleeve. My unit did not come with one. Had a little trouble installing the channel sleeve... very tight.. Cleaned channel with some alcohol and buffed sleeve slightly with some fine sandpaper .. Installed easily with Brownells tool . Installed all new internal parts throughout ..
Tested with Glock, Lone wolf ,,P80 ver1 and
ver 2, frames .. all check out ok..Recommended buy.
Suggest bow tie slide racker for cool look.
high quality but....(31.10.2017)
I recently decided to build a glock 26L by chopping a 19 frame and then topping it off with this slide. I wanted to do this since i have carried my 26 in 19 holsters for a long time and decided this would be a the best option. I recieved this slide in, and to my surprise there was already a channel liner in it. My local shops gunsmith brought it out to me and they were just as confused as me. But I assembled it and first thing to note was the striker block was an extremely tight fit and struggled to work at first. A little sand paper would likely fix that. Nonetheless i finished assembly and put it on the frame an due to the very boxy edges it does not fit in any of my kydex holsters. I have tried 3 brands both inside and outside the waistband. I will try loosening them some more but this one will most likely have to be returned. All that aside, seems to be a quality made slide and you wont beat the price.
Out of spec(16.11.2017)
good looking slide, but extractor/plunger hole is way too tight, had to sand paper it out to work properly. so was the striker channel, then stock hight Glock sights don't work, because the gun will shoot 6 inches low at 10 yards. Also since this slide doesn't have rounded edges like OEM slide, it won't fit in any kydex holsters I have, and I got 4 of those.
long story short, I'm sending it back
No Issues Whatsoever(22.11.2017)
I was skeptical about this slide after reading a few of the other reviews, but it was the best price on a stripped Glock slide that I was able to find, so I went for it anyway.
Used it to finish my Polymer80 build today and I've had zero issues. The finish is even and looks great, all of the edges are clean, serrations are sharp in a good way, there are no tool marks that I was able to see anywhere on the piece.
The slide, as mentioned, does not come with a channel liner installed, and fits a correctly beveled channel liner like a glove. All of the components I used fit in fine (the sights required fitting) and the slide locks up tight every time.
The window also looks great with a stainless barrel underneath.
Good solid piece for the price, no complaints.
Great slide for your P80 builds.(02.02.2018)
Bought this slide for my P80 build after a lot of consideration and watching/reading several reviews. It looks great with the window cut and has a good finish. I had no issues assembling the slide, mating the slide with the frame, and no issue with it going into battery. Admittedly all of the issues related to my build laid solely to the frame. I know this may vary by slide and internal parts used. I used a Shadow Systems slide completion kit, Ameriglo Hackathorn sights, ATI Barrel, and Glock OEM guide rod/spring. I fortunately did not have to fit any parts. Initially I used a Lone Wolf steel guide rod but found I got better groups with the OEM.
Excellent choide (27.02.2018)
purchased this slide with window and Brownells barrel to build polymer 80; also got a Suarez slide ( not Brownells source) . I am very pleased with fit ; finish and function of the Brownells esp vs the competition; this slide and barrel work great and function equally great. For price and quality I would chose the Brownells components over Suarez. the competition is excellent but at 600$ vs approx 300 for this slide and barrel ; hands down better. No rust no finish issues and flawless in function. Would be outstanding if Brownells offered a combo package with sights and barrell
Works great doesnât fit Glock mos plate(27.05.2018)
This is a well working decent looking slide. I got the Glock 17 gen 3 with rmr cut and top window cut. IT DOES NOT ACCEPT GLOCK MOS ADAPTER PLATES! So the vortex venom I got WILL NOT work with this. :( but otherwise Iâm pretty happy with it.
Great on Glock gen 3 lower(06.07.2018)
I was real impressed with the fit and finish of this slide, it assembled easy with Glock upper parts kit and went on my Glock gen 3 lower no problrms but for some reason this slide wonât fit on my Polymer80 Glock 19 lower. I have no issues with the Glock gen 3 slide or Swenson Glock 19 slide on the polymer 80 lower either. So if you are looking at this slide for your polymer 80 build I wouldnât recommend this slide.
Great slide with no milling marks, great finish, and nice serrations. The only thing is, they don't mention about the striker channel liner, so I ordered one, only to find out that there is either one installed already, or it is machined to not need one. Not sure which and the chat help was no help in finding out.
Nice slide(27.11.2017)
Really digging this slide. Seems really well made, I just finished fitting it to my pf940c frame with only minor fitting to get it gliding like butter. Time will tell how it performs hopefully I can make it out to shoot next weekend but very impressed so far. For almost half the price of most other slides on the market you can't beat it!
The serrations are pretty sharp, I had to put on a glove after racking it a couple hundred times.
Donât hesitate guys/Gals, if youâre building a P80? YOU CANâT GO WRONG WITH THESE BROWNELLS GEN 3 SLIDES. Iâve gotten FOUR so far. Two G17 standard iron sight slides , One G19 standard slide and have one G19 standard slide with the window on the way!
Iâve had NO ISSUES with ANY OF THEM! Bought the Brownells/Victory First barrels with them, and they work PERFECTLY with these slides. They drop right in snuggly with NO FITTING ISSUES!
Like I said Iâve gotten 3 builds under the belt. With these slides on ALL, with ZERO ISSUES. Just put them together and put them on your frame and BAM! Youâve got a PERFECTLY FUNCTIONING PISTOL!
And YES GUYS/GALS you DO NEED a CHANNEL LINER. They fit a little snug , so I REALLY RECOMMEND A CHANNEL LINER INSTALLATION TOOL!
So I can tell you now unless you want to pay $400-$900 for a âName Brandâ slide, GO WITH THESE, you WONâT regret it, I PROMISE!
Again the Brownells victory first barrels work great with these slides. And theyâre all GREAT QUALITY!
So pull the trigger now, because these things are selling of the shelfâs like nothing else. And FOR REALLY GOOD REASON TOO! THANK YOU BROWNELLS FOR DOING ALL OF US P80 BUILDERS A GREAT SERVICE, BY OFFERING GOOD QUALITY PRODUCTS FOR A GOOD QUALITY PRICE! You Guys/Gals ROCK!
Poor Finish but Good Function(19.02.2018)
The slide arrived in the mail and immediately after unwrapping I saw the finish defect. There was a large discoloration around the ejector. I have a G17 RMR slide from Brownells that is much nicer with a uniform finish and has functioned well with over 1000 rounds so far. Brownells was happy to take it back but the hassle of laying out $ for another one then returning the original one and having to wait for the refund. As far as the fitment goes it is perfect I still give it 3 stars because of my experience with the other slide. Also, you DO need a channel liner with these, I know there is some questions on that.
GREAT VALUE(13.03.2018)
Received my slide fit and finish were excellent. I used a Wolf Barrel 9mm and had no fitting issues. I also used the Glock 19 slide kit Brownells sells. All parts were first class.
ONE NOTE: The Brownells description states that the slide does not come with a Channel Liner, Mine did. I am not sure if the manufacturer is now installing them upfront. But anyway the kit includes a channel liner so you are covered both ways.
I also bought one of the Swenson 9mm threaded Glock 19 barrels that xxx is selling this month for $99.99. It also worked like a charm
Sub par finish(16.07.2018)
Poor finish . Top of slide has discolored scotches . I am not happy .
Poor Fit(11.09.2018)
I was very disappointed with the slide I received as it would not fit or function on any of the frames I tried it on. The slide rails were so tight it would not fit on a Glock 19 or P80 Compact frame. So I had to spend many hours filing and polishing to open up the rails until it would at least fit onto a frame and had to use a lot of lube and slide rail break-in compound before it would even cycle, and it it still needs more work because it will not function reliably. I was kind in giving it two stars only because all the Glock slide parts fit as they should.
Artikel-Nr.: 078000368 BROWNELLS IRON SIGHT SLIDE +WINDOW GEN3 GLOCK® 17 STAINLESS NITRIDE Herstellerproduktnummer: NONE050806112568 Unser Iron Sight Slide für Glock 17® Gen3 ermöglicht es dir, eine benutzerdefinierte Glock®-Stil-Pistole zu bauen oder eine alte zu reparieren - mit einem Schlitten, der markante, individuell gestaltete Riegelrillen aufweist. Die einzigartigen vorderen Rillen helfen dabei, den Schlitten unter Druck zu bedienen, insbesondere für schnelle Kammerprüfungen und um gelegentliche Störungen zu beheben. Sowohl die vorderen als auch die hinteren Rillen sind auf die gleiche Tiefe wie die Rillen des Glock®-Werksschlittens geschnitten, um sicherzustellen, dass die Gesamtrigidität des Schlittens nicht verloren geht. Die oberen Kanten und der vordere Bereich um die Mündung sind abgeschrägt, um das Risiko des Hängens an Kleidung zu verringern und das Holstern der Pistole zu erleichtern. Wie alle Brownells-Schlitten ist das Iron Sight-Modell für Gen3 Glock® 17 präzise aus solidem 17-4 Edelstahl-Billet nach Werksspezifikationen gefertigt, sodass es mit allen Werksteilen oder Nachrüstteilen der Gen3 kompatibel ist. Aussen gibt es eine Glock®-Werkshintervisier-Dovetail und einen vorderen Visierstift, bereit für alle Werk- oder Nachrüstvisiere, die du wählst. Dies ist der perfekte Begleiter "Oberteil" für eine benutzerdefinierte Pistole, die auf einem Polymer80 80%-Rahmen gebaut ist. Akzeptiert Gen3 Glock® 17 Innenteile Robustes, gefrästes 17-4 Edelstahl-Hartbeschichtung in mattem Schwarz Werksschnitte für Eisenvisiere Kanalverkleidung nicht enthalten; bitte separat bestellen (siehe Hinweis unten) Fenster-Modell verfügbar Du kannst deinen Brownells Iron Sight Slide für Gen3 Glock® 17 mit einem soliden Oberteil und markanten, umlaufenden vorderen Riegelrillen erhalten - streiche mit deiner Hand über die Vorderseite des Schlittens und du kannst es nicht vermeiden, ihn zu spannen. Der Iron Sight-Schlitten ist auch mit einem Fenster-Ausschnitt oben zwischen den vorderen Seitenrillen erhältlich. Das Fenster hilft bei der Wärmeableitung, um den Lauf während des längeren Feuerns kühl zu halten, und wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen äusseren Muster (Riffelung, Spiralen, "Flammen" usw.) hast, wird deine Waffe aus der mattschwarzen Eintönigkeit auf der Schiessbahn herausstechen! Brownells Gun Tech™ Hinweis: Kanalverkleidung erforderlich für diese Schlitten. Kanalverkleidung ist ein Presspass und erfordert ein Werkzeug zur Installation. Wir empfehlen #777-100-017.
259.9CHF139CHF 259.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Art: WindowFinish: BlackHersteller/Modell: GlockModell: 17Patrone: 9 mm LugerVisierungen: Dovetail
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Baue deine individuelle Glock 17® Gen3 mit dem Iron Sight Slide von Brownells! 🔥 Perfekte Passform und einzigartiges Design für optimale Leistung.
The Foundation for a Superb D.I.Y. Pistol - Ergonomically Enhanced for Excellent Control
Our Iron Sight Slide for Glock 17® Gen3 enables you to build a custom Glock®-style pistol - or rebuild an old one - with a slide that sports distinctive customized cocking serrations. The unique front serrations aid in manipulating the slide under stress, especially for quick chamber checks AND for clearing the occasional jam. Both the front and rear serrations are cut to the same depth as the Glock® factory slide serrations to ensure no loss in overall slide rigidity. The top edges and the front around the muzzle area are chamfered to reduce the risk of snagging on clothing and to make holstering the pistol easier. Like all Brownells slides, the Iron Sight model for Gen3 Glock® 17 is precision machined from solid 17-4 stainless steel billet to factory specifications inside so it is compatible with any factory or aftermarket Gen3 internal components. Outside, there's a Glock® factory rear sight dovetail and front sight tenon cut ready for any factory or aftermarket sights you choose. This is the perfect companion "top-half" for a custom pistol built on a Polymer80 80% frame. Accepts Gen3 Glock® 17 internal parts Sturdy machined 17-4 stainless steel Tough matte Black Nitride finish Factory cuts for iron sights Channel liner not included; please order separately (see note below) Window model available You can get your Brownells Iron Sight Slide for Gen3 Glock® 17 with a solid top and distinctive wraparound front cocking serrations - swipe your paw along the front of the slide and you can't avoid racking it. The Iron Sight slide is also available with a window cutout on top between the front side serrations. The window aids in heat dissipation to keep the barrel cool during extended fire, AND if you have an upgraded barrel with a contrasting finish or a unique exterior pattern (fluting, spirals, "flames," etc.) it'll help your gun stand out from the matte black sameness on the firing line! Brownells Gun Tech™ Note: Channel liner required for these slides. Channel liner is a press fit and requires a tool to install. We recommend #777-100-017.
Mehr...
Die Grundlage für eine hervorragende D.I.Y. Pistole - Ergonomisch verbessert für ausgezeichnete Kontrolle
Unser Iron Sight Slide für Glock 17® Gen3 ermöglicht es dir, eine benutzerdefinierte Glock®-Stil-Pistole zu bauen oder eine alte zu reparieren - mit einem Schlitten, der markante, individuell gestaltete Riegelrillen aufweist. Die einzigartigen vorderen Rillen helfen dabei, den Schlitten unter Druck zu bedienen, insbesondere für schnelle Kammerprüfungen und um gelegentliche Störungen zu beheben. Sowohl die vorderen als auch die hinteren Rillen sind auf die gleiche Tiefe wie die Rillen des Glock®-Werksschlittens geschnitten, um sicherzustellen, dass die Gesamtrigidität des Schlittens nicht verloren geht. Die oberen Kanten und der vordere Bereich um die Mündung sind abgeschrägt, um das Risiko des Hängens an Kleidung zu verringern und das Holstern der Pistole zu erleichtern. Wie alle Brownells-Schlitten ist das Iron Sight-Modell für Gen3 Glock® 17 präzise aus solidem 17-4 Edelstahl-Billet nach Werksspezifikationen gefertigt, sodass es mit allen Werksteilen oder Nachrüstteilen der Gen3 kompatibel ist. Aussen gibt es eine Glock®-Werkshintervisier-Dovetail und einen vorderen Visierstift, bereit für alle Werk- oder Nachrüstvisiere, die du wählst. Dies ist der perfekte Begleiter "Oberteil" für eine benutzerdefinierte Pistole, die auf einem Polymer80 80%-Rahmen gebaut ist. Akzeptiert Gen3 Glock® 17 Innenteile Robustes, gefrästes 17-4 Edelstahl-Hartbeschichtung in mattem Schwarz Werksschnitte für Eisenvisiere Kanalverkleidung nicht enthalten; bitte separat bestellen (siehe Hinweis unten) Fenster-Modell verfügbar Du kannst deinen Brownells Iron Sight Slide für Gen3 Glock® 17 mit einem soliden Oberteil und markanten, umlaufenden vorderen Riegelrillen erhalten - streiche mit deiner Hand über die Vorderseite des Schlittens und du kannst es nicht vermeiden, ihn zu spannen. Der Iron Sight-Schlitten ist auch mit einem Fenster-Ausschnitt oben zwischen den vorderen Seitenrillen erhältlich. Das Fenster hilft bei der Wärmeableitung, um den Lauf während des längeren Feuerns kühl zu halten, und wenn du einen verbesserten Lauf mit einer kontrastierenden Oberfläche oder einem einzigartigen äusseren Muster (Riffelung, Spiralen, "Flammen" usw.) hast, wird deine Waffe aus der mattschwarzen Eintönigkeit auf der Schiessbahn herausstechen! Brownells Gun Tech™ Hinweis: Kanalverkleidung erforderlich für diese Schlitten. Kanalverkleidung ist ein Presspass und erfordert ein Werkzeug zur Installation. Wir empfehlen #777-100-017.
Mehr...
Kundenbewertungen zu BROWNELLS IRON SIGHT SLIDE +WINDOW GEN3 GLOCK® 17 STAINLESS NITRIDE
Anzahl der Bewertungen: 20
Von brownells.com: 20
Durchschnittliche Bewertung: 4.1
Brownell's Glock 17 Slide(07.10.2017)
I purchased this slide to top off a Polymer80 lower build. The fit and finish of the slide is excellent. The slide takes all of the original slide internals and the stock Glock night sights fit like a glove. The front and rear serrations provide for a secure way to manipulate the slide with no slipping of the hand when hot, cold, wet or dry,.
I have only one slight problem with the slide. When attaching the Glock front sight, the relief machined for the front sight screw was not enough to snug the screw down properly using a standard
or even with a thin walled driver. I sent Brownell's a picture and recommended they cut a little more radius.
I am pleased with my choice of slide and will be making another purchase for my Glock 19
JUST ORDERED #2! Great price/quality (19.01.2018)
I ordered this to top off my P80 full size, and it works PERFECTLY. All standard Glock parts went right in. The channel liner is a little snug but it does fit. It takes a little finagling to get it started. But it does fit. So get a liner tool and donât give up.
Other than that itâs PERFECT! Fit and function is great.
Finished slide assembly, lubed the rails, slid it on my V2 P80, racked it, slid back and forth the way it should, went out and loaded it, pulled the trigger and BOOM! Pulled the trigger again and BOOM! and AGAIN and AGAIN and AGAIN and about 100 more times. No Cycling issues no firing issues no ejecting issues. Absolutely AWESOME!
So for the money $164.99 on sale, you CANT beat it!
So what are you waiting for? Pull the trigger on this slide already, you WONT REGRET IT! I donât and I just bought another.
So you better hurry before these say âOUT OF STOCKâ or they go back to normal price!
Also one more thing, I also recommend the Brownells Victory first Threaded G17 barrel. Which is also on sale right now. I ordered two of those too.
They fit and function great with this slide, plus theyâre accurate, made of 416R stainless, nitrided, and CHEAP! $117.99
And the Glock Night sight set 6.5mm work good with this slide. Tritium insets and theyâre made of steel. $67
Pretty Happy(07.03.2018)
This slide looks awesome! For the price you absolutely canât beat it. I only have one issue with it which is the extractor plunger hole is way too tight. I read some other reviews and saw a couple people had the same issue but it sounds like a little sandpaper will fix that. Otherwise Iâm very impressed. The serrations are deep and pretty sharp. Definitely sharper than on the OEM slides but itâs not an issue. I really like the top cut as well.
Great Slide...(03.04.2018)
A great slide with nice, no nonsense features at a great price. All the parts swapped over easily without any issues. The chamfered edges are even and pleasing to the eye. The front and rear serrations are sharp and add more grip, but not overly aggressive. The black nitride coating was even and I didn't see any machining marks on the slide.
Slide is tight no wobble looks great on my gun and went together like a dream only thing I noticed I would like to bring up is that before installing the channel liner you need to take a qtip with Alcohol and clean the channel befor installing channel liner I crushed the first channel liner than cleaned it real good and it slid right into place second try would definitely recommend
great slide at a great price(21.05.2018)
Looks good works well. Needed to order a channel sleeve. My unit did not come with one. Had a little trouble installing the channel sleeve... very tight.. Cleaned channel with some alcohol and buffed sleeve slightly with some fine sandpaper .. Installed easily with Brownells tool . Installed all new internal parts throughout ..
Tested with Glock, Lone wolf ,,P80 ver1 and
ver 2, frames .. all check out ok..Recommended buy.
Suggest bow tie slide racker for cool look.
high quality but....(31.10.2017)
I recently decided to build a glock 26L by chopping a 19 frame and then topping it off with this slide. I wanted to do this since i have carried my 26 in 19 holsters for a long time and decided this would be a the best option. I recieved this slide in, and to my surprise there was already a channel liner in it. My local shops gunsmith brought it out to me and they were just as confused as me. But I assembled it and first thing to note was the striker block was an extremely tight fit and struggled to work at first. A little sand paper would likely fix that. Nonetheless i finished assembly and put it on the frame an due to the very boxy edges it does not fit in any of my kydex holsters. I have tried 3 brands both inside and outside the waistband. I will try loosening them some more but this one will most likely have to be returned. All that aside, seems to be a quality made slide and you wont beat the price.
Out of spec(16.11.2017)
good looking slide, but extractor/plunger hole is way too tight, had to sand paper it out to work properly. so was the striker channel, then stock hight Glock sights don't work, because the gun will shoot 6 inches low at 10 yards. Also since this slide doesn't have rounded edges like OEM slide, it won't fit in any kydex holsters I have, and I got 4 of those.
long story short, I'm sending it back
No Issues Whatsoever(22.11.2017)
I was skeptical about this slide after reading a few of the other reviews, but it was the best price on a stripped Glock slide that I was able to find, so I went for it anyway.
Used it to finish my Polymer80 build today and I've had zero issues. The finish is even and looks great, all of the edges are clean, serrations are sharp in a good way, there are no tool marks that I was able to see anywhere on the piece.
The slide, as mentioned, does not come with a channel liner installed, and fits a correctly beveled channel liner like a glove. All of the components I used fit in fine (the sights required fitting) and the slide locks up tight every time.
The window also looks great with a stainless barrel underneath.
Good solid piece for the price, no complaints.
Great slide for your P80 builds.(02.02.2018)
Bought this slide for my P80 build after a lot of consideration and watching/reading several reviews. It looks great with the window cut and has a good finish. I had no issues assembling the slide, mating the slide with the frame, and no issue with it going into battery. Admittedly all of the issues related to my build laid solely to the frame. I know this may vary by slide and internal parts used. I used a Shadow Systems slide completion kit, Ameriglo Hackathorn sights, ATI Barrel, and Glock OEM guide rod/spring. I fortunately did not have to fit any parts. Initially I used a Lone Wolf steel guide rod but found I got better groups with the OEM.
Excellent choide (27.02.2018)
purchased this slide with window and Brownells barrel to build polymer 80; also got a Suarez slide ( not Brownells source) . I am very pleased with fit ; finish and function of the Brownells esp vs the competition; this slide and barrel work great and function equally great. For price and quality I would chose the Brownells components over Suarez. the competition is excellent but at 600$ vs approx 300 for this slide and barrel ; hands down better. No rust no finish issues and flawless in function. Would be outstanding if Brownells offered a combo package with sights and barrell
Works great doesnât fit Glock mos plate(27.05.2018)
This is a well working decent looking slide. I got the Glock 17 gen 3 with rmr cut and top window cut. IT DOES NOT ACCEPT GLOCK MOS ADAPTER PLATES! So the vortex venom I got WILL NOT work with this. :( but otherwise Iâm pretty happy with it.
Great on Glock gen 3 lower(06.07.2018)
I was real impressed with the fit and finish of this slide, it assembled easy with Glock upper parts kit and went on my Glock gen 3 lower no problrms but for some reason this slide wonât fit on my Polymer80 Glock 19 lower. I have no issues with the Glock gen 3 slide or Swenson Glock 19 slide on the polymer 80 lower either. So if you are looking at this slide for your polymer 80 build I wouldnât recommend this slide.
Great slide with no milling marks, great finish, and nice serrations. The only thing is, they don't mention about the striker channel liner, so I ordered one, only to find out that there is either one installed already, or it is machined to not need one. Not sure which and the chat help was no help in finding out.
Nice slide(27.11.2017)
Really digging this slide. Seems really well made, I just finished fitting it to my pf940c frame with only minor fitting to get it gliding like butter. Time will tell how it performs hopefully I can make it out to shoot next weekend but very impressed so far. For almost half the price of most other slides on the market you can't beat it!
The serrations are pretty sharp, I had to put on a glove after racking it a couple hundred times.
Donât hesitate guys/Gals, if youâre building a P80? YOU CANâT GO WRONG WITH THESE BROWNELLS GEN 3 SLIDES. Iâve gotten FOUR so far. Two G17 standard iron sight slides , One G19 standard slide and have one G19 standard slide with the window on the way!
Iâve had NO ISSUES with ANY OF THEM! Bought the Brownells/Victory First barrels with them, and they work PERFECTLY with these slides. They drop right in snuggly with NO FITTING ISSUES!
Like I said Iâve gotten 3 builds under the belt. With these slides on ALL, with ZERO ISSUES. Just put them together and put them on your frame and BAM! Youâve got a PERFECTLY FUNCTIONING PISTOL!
And YES GUYS/GALS you DO NEED a CHANNEL LINER. They fit a little snug , so I REALLY RECOMMEND A CHANNEL LINER INSTALLATION TOOL!
So I can tell you now unless you want to pay $400-$900 for a âName Brandâ slide, GO WITH THESE, you WONâT regret it, I PROMISE!
Again the Brownells victory first barrels work great with these slides. And theyâre all GREAT QUALITY!
So pull the trigger now, because these things are selling of the shelfâs like nothing else. And FOR REALLY GOOD REASON TOO! THANK YOU BROWNELLS FOR DOING ALL OF US P80 BUILDERS A GREAT SERVICE, BY OFFERING GOOD QUALITY PRODUCTS FOR A GOOD QUALITY PRICE! You Guys/Gals ROCK!
Poor Finish but Good Function(19.02.2018)
The slide arrived in the mail and immediately after unwrapping I saw the finish defect. There was a large discoloration around the ejector. I have a G17 RMR slide from Brownells that is much nicer with a uniform finish and has functioned well with over 1000 rounds so far. Brownells was happy to take it back but the hassle of laying out $ for another one then returning the original one and having to wait for the refund. As far as the fitment goes it is perfect I still give it 3 stars because of my experience with the other slide. Also, you DO need a channel liner with these, I know there is some questions on that.
GREAT VALUE(13.03.2018)
Received my slide fit and finish were excellent. I used a Wolf Barrel 9mm and had no fitting issues. I also used the Glock 19 slide kit Brownells sells. All parts were first class.
ONE NOTE: The Brownells description states that the slide does not come with a Channel Liner, Mine did. I am not sure if the manufacturer is now installing them upfront. But anyway the kit includes a channel liner so you are covered both ways.
I also bought one of the Swenson 9mm threaded Glock 19 barrels that xxx is selling this month for $99.99. It also worked like a charm
Sub par finish(16.07.2018)
Poor finish . Top of slide has discolored scotches . I am not happy .
Poor Fit(11.09.2018)
I was very disappointed with the slide I received as it would not fit or function on any of the frames I tried it on. The slide rails were so tight it would not fit on a Glock 19 or P80 Compact frame. So I had to spend many hours filing and polishing to open up the rails until it would at least fit onto a frame and had to use a lot of lube and slide rail break-in compound before it would even cycle, and it it still needs more work because it will not function reliably. I was kind in giving it two stars only because all the Glock slide parts fit as they should.
Hilfe und Kontakt
Newsletter
Klassische Ansicht
Mobile Ansicht