Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

MAGPUL
GL ENHANCED MAGAZINE WELLS FOR GLOCK® 17 GEN 3

840815117520 100900004

Ensure Mag Insertion in Stressful Situations

The Magpul GL Enhanced Magazine Well for GLOCK 17 GEN 3 is a high performance, purpose-built GLOCK frame magazine well. It was designed to enhance and ensure positive magazine insertion in high stress scenarios. Its sleek and ergonomic design features also provide excellent concealment and ensure minimal printing to the user's clothing. Ramp and edge geometry allow for the smooth removal of faulty or stuck magazines during reloading or immediate action events. The Magpul GL Enhanced Magazine Well is optimized for use with standard capacity GLOCK factory magazines, Magpul GL9® PMAGs®, and a variety of aftermarket floorplates and extensions that are available for both. Recent generations of reduced capacity (10 rd) factory GLOCK magazines have several dimensional differences which may interfere with any magazine well, including the Magpul GL Enhanced Magazine Well. Some large aftermarket floorplates may also interfere. Due to inherent variances in GLOCK frame production, if an excessively tight fit is experienced during the installation of an Enhanced Magazine Well that requires excessive force, Magpul recommend that a professional gunsmith complete the installation to mitigate the potential for frame damage. Made in the USA. FEATURES Reinforced polymer construction Easy installation Rugged polymer formula holds up to rough handling Large ramp area for easier reloading External dimensions ensure minimal printing during concealed carry Compatible with Magpul, OEM and most aftermarket floor plates and magazine extensions COMPATIBILITY Fits GEN 3 versions of the: G17, G17L, G22, G24, G31, G34, G35, G37. Compatible with Magpul, OEM and most aftermarket magazine floor plates. Compatible with most common after-market magazine extensions. DISCLAIMER: “GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. or GLOCK Ges.m.b.H. Neither Brownells nor this site are affiliated in any manner with, or otherwise endorsed by, GLOCK, Inc. or GLOCK Ges.m.b.H. The use of “GLOCK” on this page is merely to advertise the sale of GLOCK pistols, parts, or components. For genuine GLOCK, Inc. and GLOCK Ges.m.b.H. products and parts visit www.glock.com.

Mehr...

Sichere Magazin-Einführung in stressigen Situationen

Der Magpul GL Enhanced Magazine Well ist optimiert für die Verwendung mit Standard-Kapazitäts-Glock-Originalmagazinen, Magpul GL-Magazinen und einer Vielzahl von Aftermarket-Bodenplatten und -Erweiterungen, die für beide erhältlich sind. Neuere Generationen von reduzierten Kapazitäts-(10 Schuss)-Glock-Originalmagazinen weisen mehrere massliche Unterschiede auf, die mit jedem Magazinwell, einschliesslich des Magpul GL Enhanced Magazine Well, interferieren können. Einige grosse Aftermarket-Bodenplatten können ebenfalls interferieren.

Mehr...

Kundenbewertungen zu MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 2.8

Be Careful (02.10.2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30.09.2018)

There are three things wrong with this product that kills any usefulness. 1) Once installed, it will eliminate any ability to strip a stuck mag. The magpul part fills the magwell so that there is no room to gab the floor plate to assist in removing the mag. You will be at the total mercy of the mag free falling. 2) once installed, you will not be able to use any aftermarket mag floor plates, not even minimal ones from Vickers 3) It is not compatible with backstraps. You can file and file away to get it to fit, but chances are that you will do a poor job and it will have thrown away $20.

Mines defective! (18.06.2017)

This unit was super easy to install, it took me less than 15 seconds. The build quality appears good, until you insert a magazine. It does NOT go in easy! You literally have to slam it in hard for the magazine to properly catch,10 magazines later my palm couldn't take it no more! The next morning I called Magpul, they're sending me a replacement unit, but they claim this is normal, ??? If the new unit works, then I will update my review.

Another GREAT product from Magpul (29.06.2017)

It's a great mag-well! I installed them on all of my Gen-3's. They take about 30 seconds to install. They do make it easier and faster to do slide-lock (emergency) reloads. My only issue was that, some of my Gen-3's were a bit older and had a cutout on the front strap of the frame. I didn't care for the gap, so I contacted Glock USA and inquired into getting new frames, without the cutout. I followed their instructions, and in less than 10 days I had new replacement frames, without the cutout. I have to say, I was very impressed with Glock's service! All is good now!

Lesen Sie 4 weitere Bewertungen bei brownells.com

38.9 38.9 1 CHF

Artikel-Nr.: 100900004
MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK
Herstellerproduktnummer: MAG908-BLK 840815117520 The Magpul GL erweitert Magazin gut soll vollständig zu verbessern und Magazin einlegen in stressigen Situationen zu gewährleisten. Das Hochleistungs-Glock®-Magazin hat eine schlanke und ergonomische Design, die verschweigen und gleichzeitig minimaler Druck den Benutzern Kleidung bietet. Grosse Rampe Bereich für leichter Nachladen, einfache Installation für Glock 17 Gen 3 und Gen 4 The Magpul GL erweitert Magazin gut kompatibel mit Magpul, OEM und Aftermarket Magazin Bodenplatten und häufigste After-Market-Magazin-Erweiterungen ist.

38.9 CHF 52 CHF 38.90 *

Lieferzeit ca. 2-4 Tage aus dem lokalen Lager.

Eigenschaften: Finish: Black Hersteller/Modell: Glock Modell: 17

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Magpul GL erweiterte Magazin gut verbessert das Einlegen von Magazinen in stressigen Situationen.
Das schlanke und ergonomische Design minimiert den Druck auf deine Kleidung.
Kompatibel mit Magpul, OEM und Aftermarket Magazin Bodenplatten sowie gängigen After-Market-Magazin-Erweiterungen.

Beschreibung

The Magpul GL erweitert Magazin gut soll vollständig zu verbessern und Magazin einlegen in stressigen Situationen zu gewährleisten. Das Hochleistungs-Glock®-Magazin hat eine schlanke und ergonomische Design, die verschweigen und gleichzeitig minimaler Druck den Benutzern Kleidung bietet. Grosse Rampe Bereich für leichter Nachladen, einfache Installation für Glock 17 Gen 3 und Gen 4 The Magpul GL erweitert Magazin gut kompatibel mit Magpul, OEM und Aftermarket Magazin Bodenplatten und häufigste After-Market-Magazin-Erweiterungen ist.

Eigenschaften

Finish: Black Hersteller/Modell: Glock Modell: 17 Versandgewicht: 0.027kg Versandhöhe: 159mm Versandbreite: 44mm Versandlänge: 44mm UPC : 840815117520

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.y.1

Verbessere dein Glock 17 mit dem Magpul GL Enhanced Magazine Well! 🚀 Leichtes Nachladen und ergonomisches Design für stressige Situationen.

Ensure Mag Insertion in Stressful Situations

Mehr...

Sichere Magazin-Einführung in stressigen Situationen

Mehr...

Kundenbewertungen zu MAGPUL GL ENHANCED MAGAZINE WELL FOR GLOCK 17 GEN 3 BLACK

Anzahl der Bewertungen: 4
Von brownells.com: 4
Durchschnittliche Bewertung: 2.8

Be Careful (02.10.2017)

Will not work if you're using Glock backstraps, unless you are willing to modify.

Cannot stand Glock without Beavertail grip, so I dremeled mine to fit.

DANGER/RIP OFF (30.09.2018)