Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mehr...
Vertikaler Vorderschaftgriff mit integriertem schnell einsatzbereitem Bipod
Der vertikale Griff mit schnell einsatzbereiten Bipod-Beinen ist eine kostengünstige Alternative für Anwendungen, bei denen die Funktionen und Vorteile des ursprünglichen GPS-02 Grip Pods gewünscht sind, aber die Stahlverstärkungen in den Beinen überflüssig sind. Der GPS-LE (Law Enforcement) wird an der unteren Zubehörschiene des Vorderschafts deines taktischen Gewehrs befestigt, genau wie der GPS-02, um die gleiche verbesserte Kontrolle während CQB und eine stabile Bipod-Unterlage für präzises Schiessen auf lange Distanz zu bieten. Die handschmeichelnden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den grossen, tief geriffelten Auslöser, und eine kraftvolle Feder fährt die Beine sofort aus. Der Knopf ist bequem für die Daumennutzung platziert und sitzt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Höhe, damit ein standardmässiges 30-Schuss-Magazin den Boden nicht berührt und nicht an Gestrüpp, Fahrzeuginneneinrichtungen oder anderem Zubehör hängen bleibt, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; der Stahlkreuzbolzen mit leicht zu greifendem Daumenschraubverschluss wird direkt an jede MIL-STD 1913 Picatinny-Schiene befestigt, um eine rocksolide Passform zu gewährleisten. Akzeptiert GPRS1 und GPRS2 Aufsteck-Zubehörschienen, die separat erhältlich sind. Kann auf vielen Nicht-AR-Gewehren und leichten Maschinengewehren mit Zubehörschienen am Vorderschaft verwendet werden.
SPECS: Verstärkter Polymer, schwarz. 6¼” (15.9cm) lang mit eingefahrenen Beinen. 8½” (21.6cm) hoch mit ausgefahrenen Beinen. 13⁄8" (3.5cm) Durchmesser. 7 oz. (197g).
Mehr...
Kundenbewertungen zu G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 4.8
Great Product!(09.09.2010)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(17.09.2010)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(09.11.2009)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(24.03.2010)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(18.06.2010)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(17.07.2010)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(06.11.2011)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(09.02.2012)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(02.05.2012)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(26.08.2012)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(12.04.2013)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.
Artikel-Nr.: 100003633 G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK Herstellerproduktnummer: GPS-LE793573782915 Der vertikale Griff mit schnell einsatzbereiten Bipod-Beinen ist eine kostengünstige Alternative für Anwendungen, bei denen die Funktionen und Vorteile des ursprünglichen GPS-02 Grip Pods gewünscht sind, aber die Stahlverstärkungen in den Beinen überflüssig sind. Der GPS-LE (Law Enforcement) wird an der unteren Zubehörschiene des Vorderschafts deines taktischen Gewehrs befestigt, genau wie der GPS-02, um die gleiche verbesserte Kontrolle während CQB und eine stabile Bipod-Unterlage für präzises Schiessen auf lange Distanz zu bieten. Die handschmeichelnden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den grossen, tief geriffelten Auslöser, und eine kraftvolle Feder fährt die Beine sofort aus. Der Knopf ist bequem für die Daumennutzung platziert und sitzt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Höhe, damit ein standardmässiges 30-Schuss-Magazin den Boden nicht berührt und nicht an Gestrüpp, Fahrzeuginneneinrichtungen oder anderem Zubehör hängen bleibt, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; der Stahlkreuzbolzen mit leicht zu greifendem Daumenschraubverschluss wird direkt an jede MIL-STD 1913 Picatinny-Schiene befestigt, um eine rocksolide Passform zu gewährleisten. Akzeptiert GPRS1 und GPRS2 Aufsteck-Zubehörschienen, die separat erhältlich sind. Kann auf vielen Nicht-AR-Gewehren und leichten Maschinengewehren mit Zubehörschienen am Vorderschaft verwendet werden.
174.9CHF0CHF 174.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mehr...
Vertikaler Vorderschaftgriff mit integriertem schnell einsatzbereitem Bipod
Der vertikale Griff mit schnell einsatzbereiten Bipod-Beinen ist eine kostengünstige Alternative für Anwendungen, bei denen die Funktionen und Vorteile des ursprünglichen GPS-02 Grip Pods gewünscht sind, aber die Stahlverstärkungen in den Beinen überflüssig sind. Der GPS-LE (Law Enforcement) wird an der unteren Zubehörschiene des Vorderschafts deines taktischen Gewehrs befestigt, genau wie der GPS-02, um die gleiche verbesserte Kontrolle während CQB und eine stabile Bipod-Unterlage für präzises Schiessen auf lange Distanz zu bieten. Die handschmeichelnden Konturen und tiefen Rillen des Griffs bieten selbst bei nassen Händen einen festen Halt. Drücke den grossen, tief geriffelten Auslöser, und eine kraftvolle Feder fährt die Beine sofort aus. Der Knopf ist bequem für die Daumennutzung platziert und sitzt bündig mit der umgebenden Oberfläche, um ein versehentliches Ausfahren zu verhindern. Ausgefahrene Beine bieten ausreichend Höhe, damit ein standardmässiges 30-Schuss-Magazin den Boden nicht berührt und nicht an Gestrüpp, Fahrzeuginneneinrichtungen oder anderem Zubehör hängen bleibt, wenn sie eingefahren sind. Beine und Griff bestehen aus robustem, spritzgegossenem Polymer; der Stahlkreuzbolzen mit leicht zu greifendem Daumenschraubverschluss wird direkt an jede MIL-STD 1913 Picatinny-Schiene befestigt, um eine rocksolide Passform zu gewährleisten. Akzeptiert GPRS1 und GPRS2 Aufsteck-Zubehörschienen, die separat erhältlich sind. Kann auf vielen Nicht-AR-Gewehren und leichten Maschinengewehren mit Zubehörschienen am Vorderschaft verwendet werden.
SPECS: Verstärkter Polymer, schwarz. 6¼” (15.9cm) lang mit eingefahrenen Beinen. 8½” (21.6cm) hoch mit ausgefahrenen Beinen. 13⁄8" (3.5cm) Durchmesser. 7 oz. (197g).
Mehr...
Kundenbewertungen zu G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 4.8
Great Product!(09.09.2010)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(17.09.2010)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(09.11.2009)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(24.03.2010)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(18.06.2010)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(17.07.2010)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(06.11.2011)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(09.02.2012)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(02.05.2012)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(26.08.2012)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(12.04.2013)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.