LEE PRECISION
BREECH LOCK RELOADER PRESS

734307900458 100053413

An outstanding value. Exclusive balance lever that can't drop down to pinch your fingers. Unlimited hand clearance that only a "C" frame can offer. Works equally well with the right or left hand. Even if you already own a press, an extra press is always useful for decapping, bullet seating or bullet sizing. Accepts standard 7/8 x14 thread dies and standard Universal Press Shell Holders. Now features Lee Breech Lock feature. Shown mounted to the Lee Bench Plate system, sold as an accessory.

Altro...

Un valore eccezionale. Esclusivo leva di bilanciamento che non può scendere per pizzicare le dita. Spazio illimitato per le mani che solo un telaio "C" può offrire. Funziona altrettanto bene con la mano destra o sinistra. Anche se possiedi già una pressa, una pressa extra è sempre utile per decapping, inserimento proiettili o dimensionamento proiettili. Accetta matrici standard con filettatura 7/8 x14 e supporti per gusci di pressa universali standard. Ora presenta la funzionalità Lee Breech Lock. Mostrato montato sul sistema Lee Bench Plate, venduto come accessorio.

Altro...

Punteggi dei clienti per LEE PRECISION BREECH LOCK RELOADER "C" FRAME PRESS

Numero di punteggi: 8
Da brownells.com: 7
Punteggio medio: 3.3

azloader (15.06.2013)

DO NOT BUY THIS PIECE O GARBAGE. It is made of pot metal, I bought one looking for a single stager for more precise loading and after the 4th 223 shell put in to size and de-prime the metal where it was bolted down in the back snapped making it a useless boat anchor!

Good light duty press (27.10.2013)

This little press is a dandy for the money. It is best used for a deprime station, bullet seating and pistol and small rifle press. I've had mine for several years without a problem. It's a bit rough around the edge but it's a small inexpensive press. For fun, I loaded some 357 Magnum rounds and I couldn't tell the difference between the targets made with my more expensive LEE Classic Cast Press. Buy it and use it as stated above.

Bang for the buck (22.07.2014)

I use this to decap and decrimp 5.56 and 7.62 milsurp NATO brass. I don't smoke in the house but I do in my garage ;) and that's where this cheap little press is mounted. I have me a smoke and decap some brass. How much brass you ask? Tens of thousands of cases. I use lee dies with Dillion case lube to full size and decap and a RCBS Swaging die to decrimp. And this little press doesn't miss a beat. Might buy another so I can have a dedicated decrimper. Buy one you won't regret it...

great light duty press (01.01.2015)

I use this press strictly for depriming fired cases. teamed with the Lee depriming die, it makes a great inexpensive combo.

awesome (19.04.2015)

ram goes up perfectly straight, i check every seated bullet on my concentricity gauge and its dead on half a thousand, I reloaded over 1,300 rounds 7mm Rem Mag on this press held up strong for 14 years so far and I love it.

Arm is cheap cast metal (06.07.2016)

I bought this because it was cheap ... boy, was it ever!

After less than a month the arm broke in half while trying to resize a rifle case.

I learned my lesson, quality is not cheap but this "press" is.

Great little press (23.07.2017)

I've had mine for about 5 years now. Well, I had one, and was resizing some large cases that weren't lubed enough and broke the mount off because I was pulling it way too hard. But Lee replaced it for free when I sent in pictures. I actually love this thing because of the "C" shape, which gives you extra room to work, and it's shorter length handle. It takes very little movement to load when comparing to the classic model. I prefer this one by far. I've loaded everything from precision 6.5 Creedmoor rounds down to 9mm hollow points with this thing. Can handle them all with ease. Highly recommended.

nach ca. 2'500 Patronen gebrochen (28.03.2018)

Wenns nur ca. 2-3000 Patronen hält ist dieser Preis zu teuer.
Was mich aber mehr anko***zt, die angebliche 100% Satisfaction Garantie von Brownells die ist gleich Null! Fall gemeldet, zig Nachfragen gemacht, Reaktion - Null! Am liebsten würde ich den ganzen Sch**ss, den ich je dort bestellt habe, zurücksenden und mein Geld zurück verlangen aber was bringts wenn die nicht draufeingehen?
Ich werde mich über diese Papp***nasen im Mutterhaus USA beschweren. Als man noch dort bestellen konnte war alles besser.

Leggi più recensioni su brownells.com

84.9 84.9 1 CHF

N. prodotto: 100053413
LEE PRECISION BREECH LOCK RELOADER "C" FRAME PRESS
Parti Fabbricante: 90045 734307900458 Un valore eccezionale. Esclusivo leva di bilanciamento che non può scendere per pizzicare le dita. Spazio illimitato per le mani che solo un telaio "C" può offrire. Funziona altrettanto bene con la mano destra o sinistra. Anche se possiedi già una pressa, una pressa extra è sempre utile per decapping, inserimento proiettili o dimensionamento proiettili. Accetta matrici standard con filettatura 7/8 x14 e supporti per gusci di pressa universali standard. Ora presenta la funzionalità Lee Breech Lock. Mostrato montato sul sistema Lee Bench Plate, venduto come accessorio.

84.9 CHF 1 CHF 84.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Leva di bilanciamento esclusiva che previene infortuni alle dita.
Spazio illimitato per le mani grazie al telaio "C".
Compatibile con die standard 7/8 x14 e supporti per conchiglie universali.

Caratteristiche

Peso della spedizione: 1.009kg Altezza di spedizione: 64mm Larghezza di spedizione: 165mm Lunghezza di spedizione: 305mm UPC : 734307900458