Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Mehr...
Übergrosses Pad für schnelle Magazinwechsel
Der extra grosse, leicht erreichbare Magazinfreigabeschalter ersetzt das originale Fabrikteilen für schnelle, sichere Magazinwechsel während des Kampfes oder Wettbewerbs. Das übergrosse Pad mit vertikaler, gezahnter Oberfläche sorgt für eine perfekte Ausrichtung mit deinem Finger für eine sichere, rutschfeste Freigabe unter allen Wetterbedingungen. Aus fallgehärtetem Stahl gefertigt für zusätzliche Haltbarkeit und dann Parkerisiert für überlegene Abriebfestigkeit und Korrosionsschutz.
SPECS: Stahl, Parkerisierte Oberfläche. Gehärtet auf Rc 55. 1-13⁄16" (2,6 cm) Gesamtlänge. Pad - 13⁄16" (4,6 cm) lang x 13⁄16" (4,6 cm) breit. 0,7 oz. (19,8 g) Gewicht. Geringe Anpassungen erforderlich, einschliesslich Montageschrauben.
Mehr...
Kundenbewertungen zu SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4.8
A must have!(16.01.2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19.05.2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21.08.2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11.07.2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27.08.2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12.09.2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27.11.2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20.03.2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03.03.2016)
Great addition. Easier to find in a rush, or when wearing gloves.
Artikel-Nr.: 100004037 SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE Herstellerproduktnummer: 140040 Der extra grosse, leicht erreichbare Magazinfreigabeschalter ersetzt das originale Fabrikteilen für schnelle, sichere Magazinwechsel während des Kampfes oder Wettbewerbs. Das übergrosse Pad mit vertikaler, gezahnter Oberfläche sorgt für eine perfekte Ausrichtung mit deinem Finger für eine sichere, rutschfeste Freigabe unter allen Wetterbedingungen. Aus fallgehärtetem Stahl gefertigt für zusätzliche Haltbarkeit und dann Parkerisiert für überlegene Abriebfestigkeit und Korrosionsschutz.
Der übergrosse Magazinfreigabhebel sorgt für schnelle und sichere Magazinwechsel.
Hergestellt aus fallgehärtetem Stahl, bietet er zusätzliche Haltbarkeit und Korrosionsschutz.
Das vertikale, geriffelte Pad gewährleistet eine rutschfeste Freigabe unter allen Wetterbedingungen.
Eigenschaften
Hersteller/Modell:
Springfield
Modell:
M14,M1A
Versandgewicht: 0.023kgVersandhöhe: 10mmVersandbreite: 66mmVersandlänge: 130mm
Artikeldetails
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Erlebe schnellen Magazinwechsel mit dem M14/M1A TACTICAL MAGAZINE RELEASE von SADLAK! 💪 Robuste Verarbeitung für alle Bedingungen.
Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Mehr...
Übergrosses Pad für schnelle Magazinwechsel
Der extra grosse, leicht erreichbare Magazinfreigabeschalter ersetzt das originale Fabrikteilen für schnelle, sichere Magazinwechsel während des Kampfes oder Wettbewerbs. Das übergrosse Pad mit vertikaler, gezahnter Oberfläche sorgt für eine perfekte Ausrichtung mit deinem Finger für eine sichere, rutschfeste Freigabe unter allen Wetterbedingungen. Aus fallgehärtetem Stahl gefertigt für zusätzliche Haltbarkeit und dann Parkerisiert für überlegene Abriebfestigkeit und Korrosionsschutz.
SPECS: Stahl, Parkerisierte Oberfläche. Gehärtet auf Rc 55. 1-13⁄16" (2,6 cm) Gesamtlänge. Pad - 13⁄16" (4,6 cm) lang x 13⁄16" (4,6 cm) breit. 0,7 oz. (19,8 g) Gewicht. Geringe Anpassungen erforderlich, einschliesslich Montageschrauben.
Mehr...
Kundenbewertungen zu SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Anzahl der Bewertungen: 10
Von brownells.com: 10
Durchschnittliche Bewertung: 4.8
A must have!(16.01.2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19.05.2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21.08.2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11.07.2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27.08.2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12.09.2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27.11.2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20.03.2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03.03.2016)
Great addition. Easier to find in a rush, or when wearing gloves.