Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Plus...
Pad Surdimensionné Pour Des Changements de Chargeur Rapides
Le levier de libération de chargeur extra large et facile d'accès remplace la pièce d'origine pour des changements de chargeur rapides et fiables lors de combats ou de compétitions. Le pad surdimensionné avec surface verticale et striée offre un alignement parfait avec ton doigt pour une libération positive et sans glissement dans toutes les conditions météorologiques. Usiné en acier traité pour une durabilité accrue, puis Parkerisé pour une résistance à l'usure et une protection contre la corrosion supérieures.
SPECS : Acier, finition Parkerisée. Durci à Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) de long x 13⁄16" (4.6cm) de large. Poids : 0.7 oz. (19.8g). Ajustement mineur requis, comprend des goupilles de montage.
Plus...
Évaluations client de SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.8
A must have!(16.01.2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19.05.2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21.08.2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11.07.2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27.08.2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12.09.2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27.11.2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20.03.2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03.03.2016)
Great addition. Easier to find in a rush, or when wearing gloves.
Référence: 100004037 SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE Ref Fabricant: 140040 Le levier de libération de chargeur extra large et facile d'accès remplace la pièce d'origine pour des changements de chargeur rapides et fiables lors de combats ou de compétitions. Le pad surdimensionné avec surface verticale et striée offre un alignement parfait avec ton doigt pour une libération positive et sans glissement dans toutes les conditions météorologiques. Usiné en acier traité pour une durabilité accrue, puis Parkerisé pour une résistance à l'usure et une protection contre la corrosion supérieures.
69.9CHF3CHF 69.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Le levier de libération de chargeur extra large permet des changements rapides et efficaces.
Usiné en acier durci et Parkerisé pour une durabilité et une résistance à la corrosion supérieures.
Le pad strié assure un alignement parfait pour une libération positive, même dans des conditions difficiles.
Caractéristiques
Manufacture:
Springfield
Modèle:
M14,M1A
Poids du colis: 0.023kgHauteur d'expédition: 10mmLargeur d'expédition: 66mmLongueur d'expédition: 130mm
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton M14/M1A avec le levier de libération SADLAK 🚀 pour des changements de chargeur rapides et fiables. Résistant et facile d'accès!
Extra large, easy-to-reach magazine release lever replaces the original factory part for fast, positive mag changes during combat or competition. Oversize pad with vertical, serrated surface provides perfect alignment with your finger for a positive, no-slip release in all weather conditions. Machined from case hardened steel for added durability, then Parkerized for superior wear resistance and corrosion protection.
SPECS: Steel, Parkerized finish. Hardened to Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) long x 13⁄16" (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required, includes mounting pins.
Plus...
Pad Surdimensionné Pour Des Changements de Chargeur Rapides
Le levier de libération de chargeur extra large et facile d'accès remplace la pièce d'origine pour des changements de chargeur rapides et fiables lors de combats ou de compétitions. Le pad surdimensionné avec surface verticale et striée offre un alignement parfait avec ton doigt pour une libération positive et sans glissement dans toutes les conditions météorologiques. Usiné en acier traité pour une durabilité accrue, puis Parkerisé pour une résistance à l'usure et une protection contre la corrosion supérieures.
SPECS : Acier, finition Parkerisée. Durci à Rc 55. 1-13⁄16" (2.6cm) OAL. Pad - 13⁄16" (4.6cm) de long x 13⁄16" (4.6cm) de large. Poids : 0.7 oz. (19.8g). Ajustement mineur requis, comprend des goupilles de montage.
Plus...
Évaluations client de SADLAK INDUSTRIES TACTICAL MAGAZINE RELEASE
Nombre d'évaluations: 10
De brownells.com: 10
Note moyenne: 4.8
A must have!(16.01.2010)
Makes tactical mag changes faster and easier! The perfect addition to any EBR style rifle (or any M14/M1A/Socom for that matter). Very high quality.
great product(19.05.2010)
very simple to change this part. installation instructions go step buy step. makes mag change super easy and very fast
good add on part(21.08.2010)
This part is a must for anyone who comes to my shop and wants to upgrade thier m1a's in any way, ebr,tactical config, etc,. The quality is excellent, fit and finish are perfect. The product makes mag changes much faster and gives the operator of the weapon a positive feel on mag changes.
For USGI spec rifles.Will not fit metric(11.07.2012)
This part is really a 5 star quality part but I gave it 3 so people would check the review and not get the wrong part. Sadlak makes two versions of this latch. One for standard rifles (USGI) spec and one for metric Chinese made rifles. This is the standard version. metric rifles need a larger pin size. This thing is so hard (55 Rc) that it is not practical trying to enlarge the hole with standard drill bits/drills. Look elsewhere if you are working on a metric M14 clone. By the way, this thing came with one of the best installation guides I have ever seen with an aftermarket part.
Great fit on Springfield bush rifle(27.08.2012)
A must have for anyone wiht M1A/M14 rifle. Fairly easy to install (except for the heavy duty spring) and makes mag change a snap. Cost is somewhat high for such a small metal piece but worth it.
worth buying(12.09.2012)
great for quick easy mag changes, install 15-20 mins.
GREAT ADDITION TO MY RIFLE(27.11.2012)
I just finished installing this on my rifle along with the Smith Enterprise Bolt Stop. This piece was fairly easy to install and works great. A big improvement over the factory part.
Mag changes made easy(20.03.2015)
Easy to install, directions were crystal clear. Width of the plate is about a hair smaller than the actual magazine, so no catching on your clothing. The only downside is that more force is required to seat a magazine if it's loaded than the stock part, but practice will compensate for that.
Sadlak makes very good products for the M14 and this is yet another example of exactly that. Installation is very easy and clear to follow with the instructions provided; they even supply a taper punch to use. The only tools you will need is a piece of wood to work on and a brass hammer. Installation will take about 5-10 minutes, very easy and fast.
Magazine manipulation is drastically different from the stock part. Insertion and extraction is much easier especially if using gloves.
Good part. Worth it (03.03.2016)
Great addition. Easier to find in a rush, or when wearing gloves.