Proven Military Design For Cleaning Semi-Auto Rifles
Offset, ratchet design gives easier, more thorough chamber cleaning for any semi-auto rifle with a closed-end receiver. Premium-quality, bronze wire, bonded between twisted steel loops; soldered at the tip for extra strength. Use a ¼" diameter cleaning rod to actuate the ratchet.
Bewährtes Militärdesign zur Reinigung von Selbstladegewehren
Das versetzte, rattenförmige Design ermöglicht eine einfachere und gründlichere Reinigung der Kammer für jedes Selbstladegewehr mit einem geschlossenen Empfänger. Hochwertiger Bronze-Draht, der zwischen verdrehten Stahl-Schlaufen verbunden ist; am Ende für zusätzliche Stärke verlötet. Verwende eine Reinigungsstange mit einem Durchmesser von ¼", um die Ratsche zu betätigen.
SPECS: Kunststoff-Ratsche, Bronze-Draht. 4" (10cm) lang. Passt nur für .308 Kammern.
Mehr...
Kundenbewertungen zu BROWNELLS .308 WINCHESTER RATCHET CHAMBER BRUSH FOR M14/M1A/M1
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3.2
Best quality M14 chamber brush ive had.(20.09.2011)
I would have given 5 stars but the brush does not fit in the buttstock along with the rest of the cleaning kit it is about a 1/2" too long as I bought this brush to replace the Junk brush that came with the buttstock cleaning kit. On quality Alone I give this brush 5 stars but overall it gets 4 stars.
Not for use on M1A/M14!(23.10.2011)
I purchased this brush to use on my M1A, but it is not the right brush. It is actually a chamber brush for the M60 machine gun, and it is too long for the M1A. I'm sure this is also why it wouldn't fit into the buttstock compartment for the previous reviewer.
The USGI M14 chamber brush does not have a non-threaded "through" hole, like this brush -- it has a threaded hole that does not go all the way through the plastic ratchet.
Works fine(28.11.2011)
This chamber brush was made for the M1 Garand which is 30-06 Springfield. The brush also works just fine for the 7.62 NATO/308 Win chambers. I have many of these and like them better than the M14 specific brush because does not require the threaded cleaning rod(it's not threaded)so all you need is a rod made of wood, metal, plastic or whatever works. This makes it much more versatile. BTW, the M60 GPMG is chambered in 7.62 NATO and not 30-06 Springfield, so how could this brush be made for the M60?
Previous reviews are both right(16.08.2012)
This brush has two portions that are fitted together:
1. The brush; and 2. The ratchet.
The brush portion is identical in size to the chamber brush I received from Springfield for my M1A.
The plastic ratchet portion is longer than the Springfield model.
Thus, the brush should function just fine, but it will not fit in the butt stock storage compartment.
Hope this helps.
Good on paper.(25.05.2018)
I bought this for my newly received Nov' 44 Springfield M1 Garand, Field Grade. It went in and cleaned the chamber, but that's when the problems started. The brush screwed itself tight into the chamber and refused to come out. I would up having to get my father to help me as I didn't have enough hands. I had to hold the follower down so the brush could clear it while also holding the op rod at bay while my father twisted the brush and hammered it out (nylon hammer). Thankfully the gun didn't receive any damage.
Good idea on paper, but beyond that it's not worth having. The cleaning tool that would have been issued with the rifle is far superior in every way. I would love to see Brownells make a reproduction of those.
Artikel-Nr.: 084140486 BROWNELLS .308 WINCHESTER RATCHET CHAMBER BRUSH FOR M14/M1A/M1050806030695 Das versetzte, rattenförmige Design ermöglicht eine einfachere und gründlichere Reinigung der Kammer für jedes Selbstladegewehr mit einem geschlossenen Empfänger. Hochwertiger Bronze-Draht, der zwischen verdrehten Stahl-Schlaufen verbunden ist; am Ende für zusätzliche Stärke verlötet. Verwende eine Reinigungsstange mit einem Durchmesser von ¼", um die Ratsche zu betätigen.
22.9CHF0CHF 22.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Proven Military Design For Cleaning Semi-Auto Rifles
Offset, ratchet design gives easier, more thorough chamber cleaning for any semi-auto rifle with a closed-end receiver. Premium-quality, bronze wire, bonded between twisted steel loops; soldered at the tip for extra strength. Use a ¼" diameter cleaning rod to actuate the ratchet.
Bewährtes Militärdesign zur Reinigung von Selbstladegewehren
Das versetzte, rattenförmige Design ermöglicht eine einfachere und gründlichere Reinigung der Kammer für jedes Selbstladegewehr mit einem geschlossenen Empfänger. Hochwertiger Bronze-Draht, der zwischen verdrehten Stahl-Schlaufen verbunden ist; am Ende für zusätzliche Stärke verlötet. Verwende eine Reinigungsstange mit einem Durchmesser von ¼", um die Ratsche zu betätigen.
SPECS: Kunststoff-Ratsche, Bronze-Draht. 4" (10cm) lang. Passt nur für .308 Kammern.
Mehr...
Kundenbewertungen zu BROWNELLS .308 WINCHESTER RATCHET CHAMBER BRUSH FOR M14/M1A/M1
Anzahl der Bewertungen: 5
Von brownells.com: 5
Durchschnittliche Bewertung: 3.2
Best quality M14 chamber brush ive had.(20.09.2011)
I would have given 5 stars but the brush does not fit in the buttstock along with the rest of the cleaning kit it is about a 1/2" too long as I bought this brush to replace the Junk brush that came with the buttstock cleaning kit. On quality Alone I give this brush 5 stars but overall it gets 4 stars.
Not for use on M1A/M14!(23.10.2011)
I purchased this brush to use on my M1A, but it is not the right brush. It is actually a chamber brush for the M60 machine gun, and it is too long for the M1A. I'm sure this is also why it wouldn't fit into the buttstock compartment for the previous reviewer.
The USGI M14 chamber brush does not have a non-threaded "through" hole, like this brush -- it has a threaded hole that does not go all the way through the plastic ratchet.
Works fine(28.11.2011)
This chamber brush was made for the M1 Garand which is 30-06 Springfield. The brush also works just fine for the 7.62 NATO/308 Win chambers. I have many of these and like them better than the M14 specific brush because does not require the threaded cleaning rod(it's not threaded)so all you need is a rod made of wood, metal, plastic or whatever works. This makes it much more versatile. BTW, the M60 GPMG is chambered in 7.62 NATO and not 30-06 Springfield, so how could this brush be made for the M60?
Previous reviews are both right(16.08.2012)
This brush has two portions that are fitted together:
1. The brush; and 2. The ratchet.
The brush portion is identical in size to the chamber brush I received from Springfield for my M1A.
The plastic ratchet portion is longer than the Springfield model.
Thus, the brush should function just fine, but it will not fit in the butt stock storage compartment.
Hope this helps.
Good on paper.(25.05.2018)
I bought this for my newly received Nov' 44 Springfield M1 Garand, Field Grade. It went in and cleaned the chamber, but that's when the problems started. The brush screwed itself tight into the chamber and refused to come out. I would up having to get my father to help me as I didn't have enough hands. I had to hold the follower down so the brush could clear it while also holding the op rod at bay while my father twisted the brush and hammered it out (nylon hammer). Thankfully the gun didn't receive any damage.
Good idea on paper, but beyond that it's not worth having. The cleaning tool that would have been issued with the rifle is far superior in every way. I would love to see Brownells make a reproduction of those.