Optimized for semi-automatic rifles, the second generation JP Semi-Auto Case Gauge guaranties function of your ammo. If it fits our gauge, it will fit even a minimum-depth SAAMI chamber without interference. Features: Specially calibrated to ensure function in semi-auto rifles Guaranties ammo fit in a minimum-spec SAAMI chamber 416 stainless steel construction for wear resistance and greater longevity
Mehr...
Verhindert munitionsbedingte Fehlfunktionen
Präzisionsgefertigtes Aluminium-Messgerät ist die schnelle, genaue und einfache Möglichkeit, nachgeladene Munition - oder vermutete Fabrikmunition - zu überprüfen, um sicherzustellen, dass die Abmessungen für die ordnungsgemässe Funktion Ihres Gewehrs korrekt sind. Ein Grossteil der halbautomatischen Staus wird durch übergrosse Fälle verursacht. Wenn Ihre Munition nicht in die Schachtel passt, passt sie nicht in Ihre Kammer. Rot oder blau eloxiert zur einfachen Identifizierung des Kalibers. Rot .223 / 5.56 Spurweite passend für .223 SAAMI und 5.56 NATO. Das blaue Messgerät .308 / 7.62 passt für .308 SAAMI und 7.62mm NATO.
Kundenbewertungen zu J P ENTERPRISES .308/7.62 CASE GAUGE
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Great Gauge(05.06.2014)
I have the LE Wilson gauge and a JP SuperMatch Barrel. Since I have the JP Barrel I decided to pickup the JP Gauge and found some of the cases that fit the Wilson gauge didn't fit the JP gauge. I believe the JP gauge is supposed to be a better match for the JP chamber so that is the one I go by. I only wish it was made from stainless steel instead of aluminum. I have other JP accessories and they are top notch.
Doesn"t Work!(10.06.2013)
Reloaded rounds went in the gauge nice and easy and came out just as easy, therefore I "assumed" good to go. The rounds wouldn"t chamber properly in my rifle bolt would not close! Upon further review there was a slight bulge (.03)in the case (need t check press) but I feel the gauge was of no value it didn't give me any assurance of good round. In my opinion....JUNK!
most accurate 223/556 gage(12.03.2017)
This is the tightest tolerance gage (yes, this spelling is the correct usage for the tool as a noun) out there for 223/5.56.
Defective cases that passed a Dillon 223 gage did not pass the JP gage. It saved me a lot of frustration if I were to start batch reloading based on faulty results.
Artikel-Nr.: 452000103 J P ENTERPRISES .308/7.62 CASE GAUGE Herstellerproduktnummer: JPCG-308812872022659 Präzisionsgefertigtes Aluminium-Messgerät ist die schnelle, genaue und einfache Möglichkeit, nachgeladene Munition - oder vermutete Fabrikmunition - zu überprüfen, um sicherzustellen, dass die Abmessungen für die ordnungsgemässe Funktion Ihres Gewehrs korrekt sind. Ein Grossteil der halbautomatischen Staus wird durch übergrosse Fälle verursacht. Wenn Ihre Munition nicht in die Schachtel passt, passt sie nicht in Ihre Kammer. Rot oder blau eloxiert zur einfachen Identifizierung des Kalibers. Rot .223 / 5.56 Spurweite passend für .223 SAAMI und 5.56 NATO. Das blaue Messgerät .308 / 7.62 passt für .308 SAAMI und 7.62mm NATO.
54.9CHF5CHF 54.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Patrone: 308 Winchester, 7.62 mm NATO
Patrone:
308 Winchester,7.62 mm NATO
Versandgewicht: 0.023kgVersandhöhe: 20mmVersandbreite: 84mmVersandlänge: 150mm
Artikeldetails
Made in USA
Artikel-Nr.: 452000102 J P ENTERPRISES .223/5.56 WYLDE CASE GAUGE Herstellerproduktnummer: JPCG-223812872022642 Präzisionsgefertigtes Aluminium-Messgerät ist die schnelle, genaue und einfache Möglichkeit, nachgeladene Munition - oder vermutete Fabrikmunition - zu überprüfen, um sicherzustellen, dass die Abmessungen für die ordnungsgemässe Funktion Ihres Gewehrs korrekt sind. Ein Grossteil der halbautomatischen Staus wird durch übergrosse Fälle verursacht. Wenn Ihre Munition nicht in die Schachtel passt, passt sie nicht in Ihre Kammer. Rot oder blau eloxiert zur einfachen Identifizierung des Kalibers. Rot .223 / 5.56 Spurweite passend für .223 SAAMI und 5.56 NATO. Das blaue Messgerät .308 / 7.62 passt für .308 SAAMI und 7.62mm NATO.
Optimized for semi-automatic rifles, the second generation JP Semi-Auto Case Gauge guaranties function of your ammo. If it fits our gauge, it will fit even a minimum-depth SAAMI chamber without interference. Features: Specially calibrated to ensure function in semi-auto rifles Guaranties ammo fit in a minimum-spec SAAMI chamber 416 stainless steel construction for wear resistance and greater longevity
Mehr...
Verhindert munitionsbedingte Fehlfunktionen
Präzisionsgefertigtes Aluminium-Messgerät ist die schnelle, genaue und einfache Möglichkeit, nachgeladene Munition - oder vermutete Fabrikmunition - zu überprüfen, um sicherzustellen, dass die Abmessungen für die ordnungsgemässe Funktion Ihres Gewehrs korrekt sind. Ein Grossteil der halbautomatischen Staus wird durch übergrosse Fälle verursacht. Wenn Ihre Munition nicht in die Schachtel passt, passt sie nicht in Ihre Kammer. Rot oder blau eloxiert zur einfachen Identifizierung des Kalibers. Rot .223 / 5.56 Spurweite passend für .223 SAAMI und 5.56 NATO. Das blaue Messgerät .308 / 7.62 passt für .308 SAAMI und 7.62mm NATO.
Kundenbewertungen zu J P ENTERPRISES .308/7.62 CASE GAUGE
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Great Gauge(05.06.2014)
I have the LE Wilson gauge and a JP SuperMatch Barrel. Since I have the JP Barrel I decided to pickup the JP Gauge and found some of the cases that fit the Wilson gauge didn't fit the JP gauge. I believe the JP gauge is supposed to be a better match for the JP chamber so that is the one I go by. I only wish it was made from stainless steel instead of aluminum. I have other JP accessories and they are top notch.
Doesn"t Work!(10.06.2013)
Reloaded rounds went in the gauge nice and easy and came out just as easy, therefore I "assumed" good to go. The rounds wouldn"t chamber properly in my rifle bolt would not close! Upon further review there was a slight bulge (.03)in the case (need t check press) but I feel the gauge was of no value it didn't give me any assurance of good round. In my opinion....JUNK!
most accurate 223/556 gage(12.03.2017)
This is the tightest tolerance gage (yes, this spelling is the correct usage for the tool as a noun) out there for 223/5.56.
Defective cases that passed a Dillon 223 gage did not pass the JP gage. It saved me a lot of frustration if I were to start batch reloading based on faulty results.