Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

HAVLIN
MOSSBERG .22 RIMFIRE M22 SUPER SIDE SCOPE MOUNT

100001258

Update Your Vintage Rimfire With Optics Of Choice

Weaver-style rail conforms to receiver curvature and attaches to existing mounting holes, centering any diameter scope directly over the barrel. Lets you mount full-size scopes and red-dot optics. Provides enough clearance to keep original rear sights in place. Easy installation: remove bolt cover, if present, to allow bolt to clear mount; add rings and scope of choice.

SPECS: Aluminum, black anodized finish. Rail measures 4-7/16" (11.3cm) long, 9/16" (1.4cm) high. Fits following models with side-tapped receiver: 26B, 26C, 42A, 42B, 42C, 42M (all variants), 43, 44B, 44US (all variants), 46A, 46B (all variants), 46M (all variants), and most Wards-Westernfield rifles (made by Mossberg) with side-tapped holes measuring 1-5/8" (4.1cm) center-to-center.

Mehr...

Rüste dein Vintage-Rimfire mit den Optiken deiner Wahl auf

Die Weaver-Schiene passt sich der Krümmung des Empfängers an und wird an den vorhandenen Montageschrauben befestigt, wodurch jedes Zielfernrohr direkt über dem Lauf zentriert wird. Damit kannst du Vollformat-Zielfernrohre und Rotpunktvisiere montieren. Sie bietet genügend Platz, um die originalen hinteren Visierungen an ihrem Platz zu lassen. Einfache Installation: Entferne die Verschlussabdeckung, falls vorhanden, um den Verschluss über die Montage zu bewegen; füge die Ringe und das gewünschte Zielfernrohr hinzu.

SPECS: Aluminium, schwarz eloxierte Oberfläche. Die Schiene misst 4-7/16" (11,3 cm) lang und 9/16" (1,4 cm) hoch. Passt auf folgende Modelle mit seitlich gebohrtem Empfänger: 26B, 26C, 42A, 42B, 42C, 42M (alle Varianten), 43, 44B, 44US (alle Varianten), 46A, 46B (alle Varianten), 46M (alle Varianten) und die meisten Wards-Westernfield-Gewehre (hergestellt von Mossberg) mit seitlichen Bohrungen, die 1-5/8" (4,1 cm) von Mitte zu Mitte messen.

Mehr...

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 5

great product (29.10.2009)

this mount was a direct replacement product was exactly as described

Good Product!!!! (19.11.2009)

This mount fit perfectly on the Mossberg 44US, the holes on the Mossberg were pre-drilled so it was installed in a matter of minutes. Installing a scope with this mount was very simple. The product is manufactured well and does NOT feel cheap.

Good product (29.05.2011)

Does exactly what it's supposed to do at a good price.

Easy to install (02.02.2012)

This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!

Solid and Well made (06.06.2012)

Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw

Jum

Great Product (10.06.2012)

Bought this for a Stevens mdl 87 (branded Western Field).
This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!

I would buy this product again and again (08.07.2012)

Bought this mount for a Wards/Mossberg Model 41 22. Mounted a BSA Sweet 22 scope and sighted it in at the range. Proceeded to knock chickens down at 200 yards. What a rifle. Couldn't have done it without your mount. Thanks

Havlin M22 scope mount on old Savage 6A (04.12.2014)

I bought an old pre-war Savage 6A about two months ago at a local gun show(always was kind of interested in the old "gill guns" ;-) ) that was drilled with scope mounting screws that were approximately 1-5/8" apart. Not knowing much about the scope mounts that fit this type of rifle, I first bought an old Weaver N2 mount for it off of GunBroker (I read somewhere on line that this was the type of scope mount that was most often used on these types of guns). Well, the N2's scope mounting holes weren't even close to fitting. I saw this mount (Havlin M22) while looking for something else on the Brownell's website, and the fact that it had the screw mounting holes 1-5/8" apart and basically appeared to be similar to the old Weaver N series of scope mounts intrigued me. This mount fit perfectly! I'm even also quite surprised that the two hex head mounting screws that came with it fit without having to be modified somehow (I read sometimes that the hex head mounting screws that come with the Weaver have to be dremeled shorter to fit). So if you have an old Savage 6A .22 laying around that you want to scope and it has scope mounting holes 1-5/8" apart on it, I would seriously think about giving this mount a try!

Wards Western Field 47C (04.10.2015)

Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.

Mounted on 46m mossberg 22 rifle (13.12.2017)

Works good . You can't go wrong. Fast shipping. Thanks JIM.

Fits Mossberg Model 42 vintage 1935 (11.07.2018)

Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.

Lesen Sie 11 weitere Bewertungen bei brownells.com

59.9 59.9 1 CHF

Artikel-Nr.: 100001258
HAVLIN M22 SCOPE MOUNT
Herstellerproduktnummer: NONE Die Weaver-Schiene passt sich der Krümmung des Empfängers an und wird an den vorhandenen Montageschrauben befestigt, wodurch jedes Zielfernrohr direkt über dem Lauf zentriert wird. Damit kannst du Vollformat-Zielfernrohre und Rotpunktvisiere montieren. Sie bietet genügend Platz, um die originalen hinteren Visierungen an ihrem Platz zu lassen. Einfache Installation: Entferne die Verschlussabdeckung, falls vorhanden, um den Verschluss über die Montage zu bewegen; füge die Ringe und das gewünschte Zielfernrohr hinzu.

59.9 CHF 55 CHF 59.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Art: Weaver Basenanzahl: 1-Piece Farbe: Matte Black Hersteller/Modell: Mossberg Material: Aluminum Modell: Universal Rifles, Universal

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Die Weaver-Stil Schiene ermöglicht eine einfache Montage von Zielfernrohren und Rotpunktvisieren direkt über dem Lauf.
Einfach zu installieren: Entferne die Verschlussabdeckung und füge die Ringe sowie das Zielfernrohr hinzu.
Passt auf verschiedene Modelle mit seitlich gebohrtem Empfänger, einschliesslich Mossberg-Varianten und Wards-Westernfield-Gewehren.

Eigenschaften

Art: Weaver Basenanzahl: 1-Piece Farbe: Matte Black Hersteller/Modell: Mossberg Material: Aluminum Modell: Universal,Universal Rifles Versandgewicht: 0.068kg Versandhöhe: 3mm Versandbreite: 107mm Versandlänge: 173mm

Artikeldetails

Made in USA

Montiere dein Zielfernrohr mit der MOSSBERG .22 RIMFIRE M22 Scope Mount. 🏹 Einfache Installation und passgenau für viele Modelle!

Update Your Vintage Rimfire With Optics Of Choice

Mehr...

Rüste dein Vintage-Rimfire mit den Optiken deiner Wahl auf

Mehr...

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Anzahl der Bewertungen: 11
Von brownells.com: 11
Durchschnittliche Bewertung: 5

great product (29.10.2009)

this mount was a direct replacement product was exactly as described

Good Product!!!! (19.11.2009)

Good product (29.05.2011)

Does exactly what it's supposed to do at a good price.

Easy to install (02.02.2012)

This worked perfectly, and installed in about 2 minutes. Make sure you have Weaver style scope rings for proper mounting to the rail. Couldn't be happier!

Solid and Well made (06.06.2012)

Fitted to my mossberg 45A perfectly even tho it is not listed only had to remove a grub screw

Jum

Great Product (10.06.2012)

Bought this for a Stevens mdl 87 (branded Western Field).
This piece bolted right on, using factory drilled and tapped holes. It fit perfect and is very stout. I am very happy with it!!

I would buy this product again and again (08.07.2012)

Havlin M22 scope mount on old Savage 6A (04.12.2014)

Wards Western Field 47C (04.10.2015)

Fit my father's old Wards Western Field 47C perfectly. Two screws and a couple of minutes and it was on like a glove.

Mounted on 46m mossberg 22 rifle (13.12.2017)

Works good . You can't go wrong. Fast shipping. Thanks JIM.

Fits Mossberg Model 42 vintage 1935 (11.07.2018)

Brings an old gun to life. The old school iron sights were beat to death on this old truck gun. Needed to scope it and this bolted right on with no problem.

Lesen Sie 11 weitere Bewertungen bei brownells.com

HAVLIN
MOSSBERG .22 RIMFIRE M22 SUPER SIDE SCOPE MOUNT

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Top Takeaways

Eigenschaften

Artikeldetails

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Vernetzen

Sichere Bezahlmethoden

Berufsverbände

Willkommen!

HAVLIN MOSSBERG .22 RIMFIRE M22 SUPER SIDE SCOPE MOUNT

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Top Takeaways

Eigenschaften

Artikeldetails

Kundenbewertungen zu HAVLIN M22 SCOPE MOUNT

Vernetzen

Sichere Bezahlmethoden

Berufsverbände

Willkommen!

HAVLIN
MOSSBERG .22 RIMFIRE M22 SUPER SIDE SCOPE MOUNT