Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.
SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.
Mehr...
Einfach zu installierende, flache Visierhalterung
Mit der einfach zu installierenden Halterung können Sie eine Optik oder ein Laservisier an Ihrer Schrotflinte anbringen, ohne die Waffe zu bohren, zu klopfen oder dauerhaft zu verändern. Entfernen Sie die beiden Stifte der Abzugsgruppe (Rem.) Oder die Auswurfschraube und den Abzugsstift (Moss.), Schieben Sie die Halterung auf, richten Sie die Löcher aus und sichern Sie sie mit den mitgelieferten Ersatzstiften. Das flache, formschlüssige Design ähnelt einem Teil des Empfängers und positioniert das Visier nahe der Bohrungsachse. Sieben Kreuzschlitze in der 5-Zoll-Schiene ermöglichen die Installation einer Optik, von Weaver-Top-Mount-Ringen oder anderem Zubehör mit viel Flexibilität bei der Einstellung des Augenabstands -40 ° F bis 150 ° F.
SPEZIFIKATIONEN: Verstärkter, spritzgegossener Polymer-Verbundwerkstoff, Schwarz oder Realtree Hardwoods HD Camo. Inklusive Halterung, Auswerferschraube mit Knopfkopf, Abzugsgruppenschraube, Rändelmutter, Gewindeeinsatz, Stellschraube mit Nylonspitze, 3 × 32 Zoll und 1 × 8 Zoll Inbusschlüssel und Anweisungen. Remington passt 870, 1100, 11-87; 12 und 20 Gauge; Rechts- oder Linkshänder. Mossberg passt 500, 835; Nur 12 Gauge; Nur für Rechtshänder.
Mehr...
Kundenbewertungen zu WEAVER REMINGTON 870, 11-87, 1100 12GA & 20GA SADDEL MOUNT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.3
I would recommend this to anyone.(08.04.2011)
Simplicity is always a plus. There is a 3F standard by which to judge any product...Form, Fit, and Function. I would give high marks on all three for this item.
Well made but not a picatinni rail!(25.12.2014)
The mount is well made and is easy to install. The bad news (be aware!) is that, dispite the description, the rail doesn't match mil standard and so none of dozen red-dots I have (trijicon, eotech, aimpoint, vortex) can be installed on this rail. The good news is that it is made of plastic, so a dremmel, 15 minutes of making existing grooves wider and cutting a coule of additional grooves and voila, the red dot can really be installed on 1187.
The fact that the rail cannot be used to instal majory of red-dot sight is the reason why I rate it as 4 starts only.
a plastic peace of junk(12.11.2017)
It's plastic! what more need said. 8 inch group at 100 yards,with rem. 870 tac. and fully rifled barrel and sabot slugs. just touch it and it flexes. save your money and buy a mettle one.
Artikel-Nr.: 955000141 WEAVER REMINGTON 870, 11-87, 1100 12GA & 20GA SADDEL MOUNT Herstellerproduktnummer: 48340076683483409 Mit der einfach zu installierenden Halterung können Sie eine Optik oder ein Laservisier an Ihrer Schrotflinte anbringen, ohne die Waffe zu bohren, zu klopfen oder dauerhaft zu verändern. Entfernen Sie die beiden Stifte der Abzugsgruppe (Rem.) Oder die Auswurfschraube und den Abzugsstift (Moss.), Schieben Sie die Halterung auf, richten Sie die Löcher aus und sichern Sie sie mit den mitgelieferten Ersatzstiften. Das flache, formschlüssige Design ähnelt einem Teil des Empfängers und positioniert das Visier nahe der Bohrungsachse. Sieben Kreuzschlitze in der 5-Zoll-Schiene ermöglichen die Installation einer Optik, von Weaver-Top-Mount-Ringen oder anderem Zubehör mit viel Flexibilität bei der Einstellung des Augenabstands -40 ° F bis 150 ° F.
Artikel-Nr.: 955000142 WEAVER MOSSBERG 500 12 GAUGE SADDLE MOUNT Herstellerproduktnummer: 48341076683483416 Mit der einfach zu installierenden Halterung können Sie eine Optik oder ein Laservisier an Ihrer Schrotflinte anbringen, ohne die Waffe zu bohren, zu klopfen oder dauerhaft zu verändern. Entfernen Sie die beiden Stifte der Abzugsgruppe (Rem.) Oder die Auswurfschraube und den Abzugsstift (Moss.), Schieben Sie die Halterung auf, richten Sie die Löcher aus und sichern Sie sie mit den mitgelieferten Ersatzstiften. Das flache, formschlüssige Design ähnelt einem Teil des Empfängers und positioniert das Visier nahe der Bohrungsachse. Sieben Kreuzschlitze in der 5-Zoll-Schiene ermöglichen die Installation einer Optik, von Weaver-Top-Mount-Ringen oder anderem Zubehör mit viel Flexibilität bei der Einstellung des Augenabstands -40 ° F bis 150 ° F.
Easy-to- install mount lets you attach an optic or laser sight to your shotgun without drilling, tapping, or making permanent alterations to the gun. Remove the two trigger group pins (Rem.), or the ejector screw and trigger pin (Moss.), slide on the mount, line up the holes, and secure it with the included replacement pins. Low-profile, form-fitting design looks like part of the receiver and positions the sight close to the bore axis. Seven cross-slots in the 5" rail let you install an optic, Weaver top-mount rings, or other accessory, with plenty of flexibility in setting eye relief. Lightweight, yet rugged, reinforced molded polymer stands up to extreme weather conditions ranging from -40°F to 150°F.
SPECS: Reinforced, injection-molded polymer composite, Black or Realtree Hardwoods HD Camo. Includes mount, button head ejector screw, trigger group bolt, knurled nut, threaded insert, nylon-tipped set screw, 3⁄32” and 1⁄8” hex head wrenches, and instructions. Remington fits 870, 1100, 11-87; 12 and 20 gauge; right or left handed models. Mossberg fits 500, 835; 12 gauge only; right handed models only.
Mehr...
Einfach zu installierende, flache Visierhalterung
Mit der einfach zu installierenden Halterung können Sie eine Optik oder ein Laservisier an Ihrer Schrotflinte anbringen, ohne die Waffe zu bohren, zu klopfen oder dauerhaft zu verändern. Entfernen Sie die beiden Stifte der Abzugsgruppe (Rem.) Oder die Auswurfschraube und den Abzugsstift (Moss.), Schieben Sie die Halterung auf, richten Sie die Löcher aus und sichern Sie sie mit den mitgelieferten Ersatzstiften. Das flache, formschlüssige Design ähnelt einem Teil des Empfängers und positioniert das Visier nahe der Bohrungsachse. Sieben Kreuzschlitze in der 5-Zoll-Schiene ermöglichen die Installation einer Optik, von Weaver-Top-Mount-Ringen oder anderem Zubehör mit viel Flexibilität bei der Einstellung des Augenabstands -40 ° F bis 150 ° F.
SPEZIFIKATIONEN: Verstärkter, spritzgegossener Polymer-Verbundwerkstoff, Schwarz oder Realtree Hardwoods HD Camo. Inklusive Halterung, Auswerferschraube mit Knopfkopf, Abzugsgruppenschraube, Rändelmutter, Gewindeeinsatz, Stellschraube mit Nylonspitze, 3 × 32 Zoll und 1 × 8 Zoll Inbusschlüssel und Anweisungen. Remington passt 870, 1100, 11-87; 12 und 20 Gauge; Rechts- oder Linkshänder. Mossberg passt 500, 835; Nur 12 Gauge; Nur für Rechtshänder.
Mehr...
Kundenbewertungen zu WEAVER REMINGTON 870, 11-87, 1100 12GA & 20GA SADDEL MOUNT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.3
I would recommend this to anyone.(08.04.2011)
Simplicity is always a plus. There is a 3F standard by which to judge any product...Form, Fit, and Function. I would give high marks on all three for this item.
Well made but not a picatinni rail!(25.12.2014)
The mount is well made and is easy to install. The bad news (be aware!) is that, dispite the description, the rail doesn't match mil standard and so none of dozen red-dots I have (trijicon, eotech, aimpoint, vortex) can be installed on this rail. The good news is that it is made of plastic, so a dremmel, 15 minutes of making existing grooves wider and cutting a coule of additional grooves and voila, the red dot can really be installed on 1187.
The fact that the rail cannot be used to instal majory of red-dot sight is the reason why I rate it as 4 starts only.
a plastic peace of junk(12.11.2017)
It's plastic! what more need said. 8 inch group at 100 yards,with rem. 870 tac. and fully rifled barrel and sabot slugs. just touch it and it flexes. save your money and buy a mettle one.