RCBS
PRIMER POCKET SWAGER COMBO-2

076683094810 749015590

The Primer Pocket Swager has been redisigned to fit a larger group of cases. The swager rods are made from stronger high tensile steel, more than doubling the strenth of the original design. Not for use on progressive presses.

Mehr...

Der Primer Pocket Swager wurde neu gestaltet, um eine grössere Gruppe von Hülsen aufzunehmen. Die Swager-Stäbe bestehen aus stärkerem hochfestem Stahl, was die Festigkeit des ursprünglichen Designs mehr als verdoppelt. Nicht für den Einsatz auf progressiven Pressen geeignet.

Mehr...

Kundenbewertungen zu RCBS PRIMER POCKET SWAGER COMBO-2

Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4

Works great (04.03.2016)

This thing is a life saver. When you get those pesky military brass pieces that have the crimped primers and you don't want to ream them out by hand, this comes in handy like there is no tomorrow. It takes the standard die threads, and mounts on to the press. You need to adjust the stem to adjust the pressure according to the brass. You will need to do this for each headstamp because each company has different thickness. Run them through and you have to slam it down on the downstroke, but that kicks the shell off and you mount the next one. The one complaint is that this is not made for presses other than RCBS that I can tell. I don't have an RCBS press (Lyman and Lee) and this does work, but it's a little off for the Lyman, and the Lee (breechlock) needed modification for it to work. The reason for the modification is because the sleeve that slides over the ram (ejects the shell on the downstroke) has to have a flat surface to be on to work properly. My Lyman has a small hump (casting seam?) and it throws it a bit off balance. It still works, but can be a pain sometimes. However, the concept is excellent and works great.

Measure before purchasing (17.04.2018)

The RCBS swage die is an affordable solution to swaging the primer pocket of crimped brass using your existing single stage press. The metal finish on this tool by RCBS seems low quality but the parts feel solid and are functional in their purpose. In order for the complete tool to work as designed, your press must have a ram smaller than 1" in diameter within 0.75" of the top of a shellholder. There is an upside down cup for case removal which is made to fit between the swager and case. If your ram is larger, you will have to use a screwdriver to remove the case from the swager which slows down the process.

Lesen Sie 2 weitere Bewertungen bei brownells.com

69.9 69.9 1 CHF

Artikel-Nr.: 749015590
RCBS PRIMER POCKET SWAGER COMBO-2
Herstellerproduktnummer: 9481 076683094810 Der Primer Pocket Swager wurde neu gestaltet, um eine grössere Gruppe von Hülsen aufzunehmen. Die Swager-Stäbe bestehen aus stärkerem hochfestem Stahl, was die Festigkeit des ursprünglichen Designs mehr als verdoppelt. Nicht für den Einsatz auf progressiven Pressen geeignet.

69.9 CHF 0 CHF 69.90 *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der Primer Pocket Swager ist neu gestaltet und passt auf eine grössere Gruppe von Hülsen.
Die Swager-Stangen sind aus stärkerem hochfestem Stahl, was die Festigkeit mehr als verdoppelt.
Dieser Swager ist nicht für den Einsatz auf progressiven Pressen geeignet.