Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users enhanced ergonomics and optional adjustable length of pull and comb height with the Magpul SGA Recoil Pad Adapter and Magpul SGA Cheek Riser Kit, both sold seperately. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available seperately is the Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.
Plus...
Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
Plus...
Évaluations client de MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG
Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 4.4
I Love O.D. Green(20.02.2017)
A good looking low cost replacement stock for heavy barrel Remington 700s. I first tried it with my Remington VTR and that was a mistake. The fat round target/varmint barrels fit and look real nice in this stock. I ended up using a new 700 Varmint ADL. The only issue or problem I found was the original action screws are short for this stock especially the front one. I ordered a new Remington factory rear action screw from Brownell's part # 767-000-051. The rear screw is the same thread pitch as the front one and is longer. I cut and filed it to fit which gave more thread contact and a more secure hold in the front near the recoil lug. Also If you plan to use an aftermarket trigger with this MAGPUL stock do yourself a favor and buy the one made by TriggerTech (Brownell's part # 100-018-029).
M-Lok device installs are a challege.(08.04.2018)
Installing M-Lok devices in this stock are a challenge due to the blind/trapped cavities in which they are placed. If the T-nuts arenât seated perfectly before tightening, they will spin and chew away at the cavity lip.
Perfect(29.03.2016)
This is a great upgrade to original Rem stock. Love the adjustable LOP and adjustable cheek riser. Very solid stock and do like the forend girth over the slim profile of the original. Great job Magpul!
Disappointed(25.01.2017)
First, let me say this is a very nice stock for a varmint or medium/heavy barrel Remington 700 SA. I purchased this stock in FDE to install on a .243 BDL with the standard contour sporter barrel. It was part of a kit with bottom metal and 10 round magazines. The action fit the stock but the action screws were too short. No problem. Ordered the longer action screws. The installed action left the sportier barrel with a very large gap between the barrel and fore end. I returned the unit. It would work fine on a heavy barrel SPS or the fluted barrel version. Just doesn't look right with the sporter barrel contour
Second the previous review(27.04.2018)
The previous review was spot on. Order a longer rear action screw and cut to length for the front. Also the barrel channel is for a heavy varmint contour barrel.
GOOD!(09.11.2015)
Got this product recently, install was a breeze. Saw this at the magpul booth at SHOTSHOW 2015 and fell in love. Good alternative to expensive magazine accepting chasis. Ill be receiving my magazine well part this thursday. This beats the garbage houge stock my Rem 700 came with. 0 feed problems so far.
Love it!(23.11.2015)
Love this stock! I installed it on a Remington 700 SPS tactical .308 (same rifle shown in the stock photo for the black stock). It doesn't specify in the description but the barrel is free-floated with this stock in addition to the aluminum action bedding block that's built in. It used the factory action screws for installation and feels rock solid. The stock feels great, looks great, and took all of 5 minutes to install. I'll be really excited once they finally ship the back-ordered bottom metal that accepts the AICS mags.
Yes - Drop-In Solution(01.12.2015)
Great stock!!! I was worried about the âtrue drop-in solutionâ but it really was. I had no problems at all. I also got the magazine well and magazine. It was a truly a âdrop-in solutionâ. Changed out the cheek piece and added an insert for my bipod.
Overall very pleased(13.01.2016)
Overall great stock but needed a little improvement. I purchased the stock, along with the magazine well and extra magazines, plus various M-Loc fittings for bipod mounting and quick detach sling swivels. My Remington 700 AAC-SD in .308 Winchester fit into it perfectly. The standard cheek piece seems perfect for using my Vortex 6-24X50 scope mounted with medium high rings.
The HARD rubber butt pad was very painful to use on the bench rest. Even at over 11 pounds total weight, the gun has more felt recoil than I expected. That, coupled with the very narrow footprint of the existing but plate, made an extended range session very painful. There is a solution. Brownells sells the adaptor to replace the adjustable butt plate with one designed to fit the Magpul stock for the Remington 870. This adapter accepts a standard ready fit recoil pad designed the fit the synthetic Remington factory stocks for the 870 and the 700. This adapter, Brownells 100-009-579, will fit the Hunter 700 stock. I installed the Limbsaver recoil pad which is very soft and has a much larger footprint to spread the recoil to the shoulder. Shooting the rifle is now much more pleasant. Other than the recoil pad, there is nothing about this stock that I do now like.
Great inexpensive alternative(19.01.2016)
Inexpensive alternative that works great! Easy to install and set up right out of the box. The ability to add the bottom metal to take magazines is outstanding. Also the M-Lock accessories that can be used with it are great. I put it on and went straight out in the woods of deepest darkest Fort Bragg with it, held up great.
The only draw back they could have put some rubber in the grip areas.
Great improvement over the factory stock(12.02.2016)
I received my stock along with new hardware and mag conversion as part of my order that I placed and installation was a ten minute or less operation. No fitting required and overall, I am please. The mag conversion kit fit with no issues and feeding rounds is smooth and consistent, which is an improvement over the previous kit that I had. Though I wanted the OD Green stock, I am please with the black and will order the OD Green one for a future build once it is available.
Remington 700 Hunter (30.08.2017)
I bought this stock for my Remington SPS Sport Tactical in.308 and also added the bottom metal to use 5 round mags because I didn't like the Hogue stock that came with my rifle. Installation was a very easy and needed no extra screws or parts. I took it to the range a week later and found that this stock out performed the old stock ð¯ %! I love it! If you're looking to upgrade your Remington 700 I would highly recommend buying this product. You can spend more money on others but you won't find anything better than this one!!! The only accessory that I added was the extra stud for my bipod and that also works great.
M-Lok device installs are a challenge(08.04.2018)
Installing M-Lok devices in this stock are a challenge due to the blind/trapped cavities in which they are placed. If the T-nuts arenât seated perfectly before tightening, they will spin and chew away at the cavity lip.
Référence: 100016646 MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG Ref Fabricant: MAG495-ODG840815100751 Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
369.9CHF26CHF 369.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100016643 MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA BLACK Ref Fabricant: MAG495-BLK840815100720 Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
369.9CHF14CHF 369.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100016644 MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA FDE Ref Fabricant: MAG495-FDE840815100737 Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
369.9CHF19CHF 369.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Référence: 100016645 MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA GRAY Ref Fabricant: MAG495-GRY840815100744 Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
369.9CHF6CHF 369.90
*
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Fabriqué au USA
US export classification: 0A501.y.1
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Améliore ton tir avec la crosse ajustable Magpul Hunter 700 pour Remington 700 SA. Ergonomie, modularité et style O.D. Vert 🌟.
Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users enhanced ergonomics and optional adjustable length of pull and comb height with the Magpul SGA Recoil Pad Adapter and Magpul SGA Cheek Riser Kit, both sold seperately. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available seperately is the Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.
Plus...
Fabriqué à partir de polymère renforcé et d'un bloc de lit en aluminium coulé anodisé A380 fini en machine, le Magpul Remington 700 Hunter Stock offre aux utilisateurs une ergonomie améliorée et une longueur de tir et une hauteur de joue réglables en option avec l' Adaptateur de Coussin de Recul Magpul SGA et le Kit de Rehausse de Joue Magpul SGA, tous deux vendus séparément. Compatible avec toutes les actions courtes Remington 700, cette crosse ne nécessite pas de lit et est une véritable solution « plug-and-play » pour l'utilisateur final. Cette crosse est également compatible M-LOK pour accepter une large gamme d'accessoires. Également disponible séparément, le Magasin à Chargement par Poussée, qui permet à la carabine d'être utilisée avec des chargeurs à boîte détachables sans besoin de fraisage personnalisé.
Plus...
Évaluations client de MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG
Nombre d'évaluations: 13
De brownells.com: 13
Note moyenne: 4.4
I Love O.D. Green(20.02.2017)
A good looking low cost replacement stock for heavy barrel Remington 700s. I first tried it with my Remington VTR and that was a mistake. The fat round target/varmint barrels fit and look real nice in this stock. I ended up using a new 700 Varmint ADL. The only issue or problem I found was the original action screws are short for this stock especially the front one. I ordered a new Remington factory rear action screw from Brownell's part # 767-000-051. The rear screw is the same thread pitch as the front one and is longer. I cut and filed it to fit which gave more thread contact and a more secure hold in the front near the recoil lug. Also If you plan to use an aftermarket trigger with this MAGPUL stock do yourself a favor and buy the one made by TriggerTech (Brownell's part # 100-018-029).
M-Lok device installs are a challege.(08.04.2018)
Installing M-Lok devices in this stock are a challenge due to the blind/trapped cavities in which they are placed. If the T-nuts arenât seated perfectly before tightening, they will spin and chew away at the cavity lip.
Perfect(29.03.2016)
This is a great upgrade to original Rem stock. Love the adjustable LOP and adjustable cheek riser. Very solid stock and do like the forend girth over the slim profile of the original. Great job Magpul!
Disappointed(25.01.2017)
First, let me say this is a very nice stock for a varmint or medium/heavy barrel Remington 700 SA. I purchased this stock in FDE to install on a .243 BDL with the standard contour sporter barrel. It was part of a kit with bottom metal and 10 round magazines. The action fit the stock but the action screws were too short. No problem. Ordered the longer action screws. The installed action left the sportier barrel with a very large gap between the barrel and fore end. I returned the unit. It would work fine on a heavy barrel SPS or the fluted barrel version. Just doesn't look right with the sporter barrel contour
Second the previous review(27.04.2018)
The previous review was spot on. Order a longer rear action screw and cut to length for the front. Also the barrel channel is for a heavy varmint contour barrel.
GOOD!(09.11.2015)
Got this product recently, install was a breeze. Saw this at the magpul booth at SHOTSHOW 2015 and fell in love. Good alternative to expensive magazine accepting chasis. Ill be receiving my magazine well part this thursday. This beats the garbage houge stock my Rem 700 came with. 0 feed problems so far.
Love it!(23.11.2015)
Love this stock! I installed it on a Remington 700 SPS tactical .308 (same rifle shown in the stock photo for the black stock). It doesn't specify in the description but the barrel is free-floated with this stock in addition to the aluminum action bedding block that's built in. It used the factory action screws for installation and feels rock solid. The stock feels great, looks great, and took all of 5 minutes to install. I'll be really excited once they finally ship the back-ordered bottom metal that accepts the AICS mags.
Yes - Drop-In Solution(01.12.2015)
Great stock!!! I was worried about the âtrue drop-in solutionâ but it really was. I had no problems at all. I also got the magazine well and magazine. It was a truly a âdrop-in solutionâ. Changed out the cheek piece and added an insert for my bipod.
Overall very pleased(13.01.2016)
Overall great stock but needed a little improvement. I purchased the stock, along with the magazine well and extra magazines, plus various M-Loc fittings for bipod mounting and quick detach sling swivels. My Remington 700 AAC-SD in .308 Winchester fit into it perfectly. The standard cheek piece seems perfect for using my Vortex 6-24X50 scope mounted with medium high rings.
The HARD rubber butt pad was very painful to use on the bench rest. Even at over 11 pounds total weight, the gun has more felt recoil than I expected. That, coupled with the very narrow footprint of the existing but plate, made an extended range session very painful. There is a solution. Brownells sells the adaptor to replace the adjustable butt plate with one designed to fit the Magpul stock for the Remington 870. This adapter accepts a standard ready fit recoil pad designed the fit the synthetic Remington factory stocks for the 870 and the 700. This adapter, Brownells 100-009-579, will fit the Hunter 700 stock. I installed the Limbsaver recoil pad which is very soft and has a much larger footprint to spread the recoil to the shoulder. Shooting the rifle is now much more pleasant. Other than the recoil pad, there is nothing about this stock that I do now like.
Great inexpensive alternative(19.01.2016)
Inexpensive alternative that works great! Easy to install and set up right out of the box. The ability to add the bottom metal to take magazines is outstanding. Also the M-Lock accessories that can be used with it are great. I put it on and went straight out in the woods of deepest darkest Fort Bragg with it, held up great.
The only draw back they could have put some rubber in the grip areas.
Great improvement over the factory stock(12.02.2016)
I received my stock along with new hardware and mag conversion as part of my order that I placed and installation was a ten minute or less operation. No fitting required and overall, I am please. The mag conversion kit fit with no issues and feeding rounds is smooth and consistent, which is an improvement over the previous kit that I had. Though I wanted the OD Green stock, I am please with the black and will order the OD Green one for a future build once it is available.
Remington 700 Hunter (30.08.2017)
I bought this stock for my Remington SPS Sport Tactical in.308 and also added the bottom metal to use 5 round mags because I didn't like the Hogue stock that came with my rifle. Installation was a very easy and needed no extra screws or parts. I took it to the range a week later and found that this stock out performed the old stock ð¯ %! I love it! If you're looking to upgrade your Remington 700 I would highly recommend buying this product. You can spend more money on others but you won't find anything better than this one!!! The only accessory that I added was the extra stud for my bipod and that also works great.
M-Lok device installs are a challenge(08.04.2018)
Installing M-Lok devices in this stock are a challenge due to the blind/trapped cavities in which they are placed. If the T-nuts arenât seated perfectly before tightening, they will spin and chew away at the cavity lip.