More Rounds Than Factory Magazine All-Steel Body Gives Rigidity
Durable high-capacity magazine provides a long service life and holds ten rounds for fewer reloads when shooting your Remington 740, 742, 750, or 7400. Folding, leaf spring and nylon follower ensure reliable feeding. Available in .30-06 and .308.
Plus de cartouches que le chargeur d'origine. Corps en acier pour plus de rigidité.
Ce chargeur durable à haute capacité offre une longue durée de vie et peut contenir dix cartouches, ce qui réduit le nombre de recharges lorsque tu tires avec ton Remington 740, 742, 750 ou 7400. Le ressort en feuille pliable et le suiveur en nylon garantissent une alimentation fiable. Disponible en .30-06 et .308.
SPÉCIFICATIONS : Acier, bleu. Environ 31⁄2" (9cm) de large, 37⁄16" (8.7cm) de haut, 1" (2.54cm) d'épaisseur. S'adapte aux Remington 740, 742, 750 & 7400.
Plus...
Évaluations client de TRIPLE-K REMINGTON 7400/742 MAGAZINE 30-06 SPRINGFIELD 10RD STEEL BLA
Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2.9
does the job(21.04.2010)
bought for my rem750 in .270 win. ammo loads well, mag fits like a dream and no problems with jams, ftf, etc up to this point. numbers don't lie, 10>4, hope to be using these for a while
Awesome Purchase(22.06.2010)
This is an awesome addition to my Model 742 and let me tell you, I feel much more comftorable in the woods hunting hogs than with the stock 4 round clip. I fired off 20 rounds in each of the two clips that I purchased and both fired and loaded flawlessly. The one draw back is that I have to hold the action open when I insert the clip in order for it to be fully inserted. Not a big deal for me and I would buy this product again and again.
Works well in 7600(10.07.2010)
The lack of bolt hold open is a non-issue in the Remington 7600. My particular magazine had a rough start with some extra metal that caught on case mouths as they were fed, but 30 seconds with a Dremmel tool solved that nicely. I traced the contour from the front of a factory mag onto this one and ground to match. Too bad Triple-K didn't do the same at the factory. After cleaning up the front of the magazine I've had no further problems. The spring holds tension well when left loaded. My example has remained loaded for the last 6 years and still feeds rounds as fast as I can shuck the action.
979M REM 7400 10rd magazine(28.05.2011)
I was glad of purchase I made from Italy, so that my friends who have also a Remington 7400 luxury carbine .30-06 I prayed for them to buy the magazine from 10 shots.
Not perfect.(12.09.2011)
I bought 2 of these for my remington 7400 to use at the gun range, the quality is ok but not as good as factory. It needs a little manhandling to get it fully seated into the rifle. I would've like to seen all metal used in the construction (the follower is plastic and has alot of play front to back) The biggest problem I have with it is that it holds the bullets down too long and they mash into the bottom of the feed ramp causing a jam and deformed bullit tips.
Triple K Version is generally good(27.11.2011)
I use it in my 742, 30-06. I initially found that it bound my bolt. I needed to take it to the grinding wheel (Dremmel) to match my original Remington clip. A few strokes with the grinder and now it feeds properly.
I would recommend it.
not again(19.01.2012)
bought 2 for 742 30-06, fowler poped out, no front tabs to hold fowler in, sides misscut, sides not bent in at a proper curve to hold rounds, not worth the postage to return to triple k
Good buy.(29.06.2012)
Good buy. ran 50 rounds through it in one session, no misfeeds, worked like a champ.
will not chamber 3 rounds in a row.(03.10.2012)
I have cleaned my rifle, also cleaned both of my 4 and 10 round mags. My rifle shot fine with the 4 round mag, but it would not shoot 3 times in a row with the 10 round mag. It even broke to tip off of 1 of my Ballistic Tip bulletswith the 10 round mag in, the action feels slower like it is dragging. Putting both clips aft end towards each other you can see the original mag is a mil or 2 wider at the feed point. Perhaps thats the problem? Maybe it can be bent?
Poor Quality Magazines(16.09.2014)
Recently bought two of these 10 round magazines for my 30-06.
I first time I put the rounds into one of them,the bottom cap came off, the spring flew out and the rounds ended up on the turf. Was pretty embarrassed at the range..The other magazine that does work is exceptionally tight fitting and difficult to get out of the gun..Not happy at all about this purchase
Tony Magazzi
7400 rifle(11.11.2014)
Bought this for a REM 7400 the clip holds the shell down to long and jams every time. The indents on the side of the clip that raise the bullet is to far forward about a 3/16 in. compared to the clip I use a 280. Might work with bullets that have a very short nose on them or other models.
Very reliable(11.02.2016)
I had a very hard time finding spare or aftermarket magazines for my 7400, either standard or high capacity. It can be a pain at the range to constantly stop shooting and reloading a single four round magazine. It's hard to relax and enjoy what you're doing when you need to constantly stop and reset everything. I was happy to finally find one at Brownells. I ordered two of the ten round magazines, and I love them both. They both work perfectly, and they fit and function more smoothly than the original. Reading the other reviews, it seems that people either love them or hate them. It could be that they have some quality control issues, and I might have caught them on a good day. It's possible they only work well in the 7400 / 7600 models, or maybe just in mine. All I can offer an opinion on are the ones I received, and I'm firmly in the "love them" group. I'll be ordering a couple more as soon as they're back in stock.
Doesn't worn in Model 742(28.07.2016)
These mags don't load, seat & cause the bolt to jam in Remington Model 742. None of the 7400 series mags seem to fit, load or properly operate either. Keep looking for actual Remington 742 mags otherwise you're just waisting time & money.
Trash(01.03.2018)
The bolt won't cycle if there's more than one round in the mag, won't take more than 5 rounds, the mag takes a lot of force to go into the well which means it doesn't fit.. Also, there's no bolt release on it. I don't know whether to return them or just throw them away because I know it's my civic duty.
Puts bullets in my gun(09.03.2018)
Shipping was a little on the slower side for standard shipping but I was in no rush to get it anyway but it does what a clip is supposed to I put it in my gun and it gave my gun bullets with no jams so there is nothing to complain about
Not bad but needs improvement(12.08.2018)
I had purchased mine and was stoked to get it but first day at the range and it jammed on every round. I did figure out why, it seems the indents in the side of it were to far forward to assist the round into the feed ramps on my 7400, I was able to get some durable epoxy to stick and made a spot on each side to assist the rounds. The quality seems pretty good, put together well just the slight tweaks and it would be a 5 star. Other then the slight issue it works pretty good and fits pretty well but hope who ever makes them can see these and make the proper improvements to make it a great magazine.
Référence: 486000002 TRIPLE-K REMINGTON 7400/742 MAGAZINE 30-06 SPRINGFIELD 10RD STEEL BLA Ref Fabricant: 979M730745000491 Ce chargeur durable à haute capacité offre une longue durée de vie et peut contenir dix cartouches, ce qui réduit le nombre de recharges lorsque tu tires avec ton Remington 740, 742, 750 ou 7400. Le ressort en feuille pliable et le suiveur en nylon garantissent une alimentation fiable. Disponible en .30-06 et .308.
49.9CHF0CHF 49.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Chargeur durable à haute capacité pouvant contenir 10 cartouches, idéal pour réduire les rechargements.
Compatible avec les modèles Remington 740, 742, 750 et 7400, offrant un chargement fiable grâce au ressort à lame pliable.
Disponible en calibres .30-06 et .308, avec des dimensions de 31⁄2" de large, 37⁄16" de haut et 1" d'épaisseur.
Caractéristiques
Calibre:
30-06 Springfield
Capacité:
10-coups
Finition:
Noir
Manufacture:
Remington
Matériaux:
Steel
Modèle:
7400
Type de Mécanisme:
Semi-Auto
Poids du colis: 0.159kgHauteur d'expédition: 38mmLargeur d'expédition: 114mmLongueur d'expédition: 180mm
UPC
: 730745000491
Détails de l'article
Fabriqué au USA
US export classification: 0A501.x
Ces articles sont contrôlés par le gouvernement des États-Unis et autorisés uniquement à être exportés vers le pays de destination finale pour être utilisés par le destinataire final ou les utilisateurs finaux identifiés dans le présent document. Ils ne peuvent être ni revendus, ni cédés à tout autre pays ou toute personne autre que le destinataire final autorisé ou l'utilisateur final, soit dans leur forme originale, soit après avoir été incorporés dans d'autres produits, sans l'accord préalable du gouvernement des États-Unis ou d'une autre manière autorisée par la législation américaine, règlements.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Découvrez le chargeur Remington 7400 10RD pour .30-06 Springfield. 🔥 Fiable et durable, il réduit les recharges lors de vos tirs.
More Rounds Than Factory Magazine All-Steel Body Gives Rigidity
Durable high-capacity magazine provides a long service life and holds ten rounds for fewer reloads when shooting your Remington 740, 742, 750, or 7400. Folding, leaf spring and nylon follower ensure reliable feeding. Available in .30-06 and .308.
Plus de cartouches que le chargeur d'origine. Corps en acier pour plus de rigidité.
Ce chargeur durable à haute capacité offre une longue durée de vie et peut contenir dix cartouches, ce qui réduit le nombre de recharges lorsque tu tires avec ton Remington 740, 742, 750 ou 7400. Le ressort en feuille pliable et le suiveur en nylon garantissent une alimentation fiable. Disponible en .30-06 et .308.
SPÉCIFICATIONS : Acier, bleu. Environ 31⁄2" (9cm) de large, 37⁄16" (8.7cm) de haut, 1" (2.54cm) d'épaisseur. S'adapte aux Remington 740, 742, 750 & 7400.
Plus...
Évaluations client de TRIPLE-K REMINGTON 7400/742 MAGAZINE 30-06 SPRINGFIELD 10RD STEEL BLA
Nombre d'évaluations: 16
De brownells.com: 16
Note moyenne: 2.9
does the job(21.04.2010)
bought for my rem750 in .270 win. ammo loads well, mag fits like a dream and no problems with jams, ftf, etc up to this point. numbers don't lie, 10>4, hope to be using these for a while
Awesome Purchase(22.06.2010)
This is an awesome addition to my Model 742 and let me tell you, I feel much more comftorable in the woods hunting hogs than with the stock 4 round clip. I fired off 20 rounds in each of the two clips that I purchased and both fired and loaded flawlessly. The one draw back is that I have to hold the action open when I insert the clip in order for it to be fully inserted. Not a big deal for me and I would buy this product again and again.
Works well in 7600(10.07.2010)
The lack of bolt hold open is a non-issue in the Remington 7600. My particular magazine had a rough start with some extra metal that caught on case mouths as they were fed, but 30 seconds with a Dremmel tool solved that nicely. I traced the contour from the front of a factory mag onto this one and ground to match. Too bad Triple-K didn't do the same at the factory. After cleaning up the front of the magazine I've had no further problems. The spring holds tension well when left loaded. My example has remained loaded for the last 6 years and still feeds rounds as fast as I can shuck the action.
979M REM 7400 10rd magazine(28.05.2011)
I was glad of purchase I made from Italy, so that my friends who have also a Remington 7400 luxury carbine .30-06 I prayed for them to buy the magazine from 10 shots.
Not perfect.(12.09.2011)
I bought 2 of these for my remington 7400 to use at the gun range, the quality is ok but not as good as factory. It needs a little manhandling to get it fully seated into the rifle. I would've like to seen all metal used in the construction (the follower is plastic and has alot of play front to back) The biggest problem I have with it is that it holds the bullets down too long and they mash into the bottom of the feed ramp causing a jam and deformed bullit tips.
Triple K Version is generally good(27.11.2011)
I use it in my 742, 30-06. I initially found that it bound my bolt. I needed to take it to the grinding wheel (Dremmel) to match my original Remington clip. A few strokes with the grinder and now it feeds properly.
I would recommend it.
not again(19.01.2012)
bought 2 for 742 30-06, fowler poped out, no front tabs to hold fowler in, sides misscut, sides not bent in at a proper curve to hold rounds, not worth the postage to return to triple k
Good buy.(29.06.2012)
Good buy. ran 50 rounds through it in one session, no misfeeds, worked like a champ.
will not chamber 3 rounds in a row.(03.10.2012)
I have cleaned my rifle, also cleaned both of my 4 and 10 round mags. My rifle shot fine with the 4 round mag, but it would not shoot 3 times in a row with the 10 round mag. It even broke to tip off of 1 of my Ballistic Tip bulletswith the 10 round mag in, the action feels slower like it is dragging. Putting both clips aft end towards each other you can see the original mag is a mil or 2 wider at the feed point. Perhaps thats the problem? Maybe it can be bent?
Poor Quality Magazines(16.09.2014)
Recently bought two of these 10 round magazines for my 30-06.
I first time I put the rounds into one of them,the bottom cap came off, the spring flew out and the rounds ended up on the turf. Was pretty embarrassed at the range..The other magazine that does work is exceptionally tight fitting and difficult to get out of the gun..Not happy at all about this purchase
Tony Magazzi
7400 rifle(11.11.2014)
Bought this for a REM 7400 the clip holds the shell down to long and jams every time. The indents on the side of the clip that raise the bullet is to far forward about a 3/16 in. compared to the clip I use a 280. Might work with bullets that have a very short nose on them or other models.
Very reliable(11.02.2016)
I had a very hard time finding spare or aftermarket magazines for my 7400, either standard or high capacity. It can be a pain at the range to constantly stop shooting and reloading a single four round magazine. It's hard to relax and enjoy what you're doing when you need to constantly stop and reset everything. I was happy to finally find one at Brownells. I ordered two of the ten round magazines, and I love them both. They both work perfectly, and they fit and function more smoothly than the original. Reading the other reviews, it seems that people either love them or hate them. It could be that they have some quality control issues, and I might have caught them on a good day. It's possible they only work well in the 7400 / 7600 models, or maybe just in mine. All I can offer an opinion on are the ones I received, and I'm firmly in the "love them" group. I'll be ordering a couple more as soon as they're back in stock.
Doesn't worn in Model 742(28.07.2016)
These mags don't load, seat & cause the bolt to jam in Remington Model 742. None of the 7400 series mags seem to fit, load or properly operate either. Keep looking for actual Remington 742 mags otherwise you're just waisting time & money.
Trash(01.03.2018)
The bolt won't cycle if there's more than one round in the mag, won't take more than 5 rounds, the mag takes a lot of force to go into the well which means it doesn't fit.. Also, there's no bolt release on it. I don't know whether to return them or just throw them away because I know it's my civic duty.
Puts bullets in my gun(09.03.2018)
Shipping was a little on the slower side for standard shipping but I was in no rush to get it anyway but it does what a clip is supposed to I put it in my gun and it gave my gun bullets with no jams so there is nothing to complain about
Not bad but needs improvement(12.08.2018)
I had purchased mine and was stoked to get it but first day at the range and it jammed on every round. I did figure out why, it seems the indents in the side of it were to far forward to assist the round into the feed ramps on my 7400, I was able to get some durable epoxy to stick and made a spot on each side to assist the rounds. The quality seems pretty good, put together well just the slight tweaks and it would be a 5 star. Other then the slight issue it works pretty good and fits pretty well but hope who ever makes them can see these and make the proper improvements to make it a great magazine.
Aide et contact
Newsletter
Vue classique
Vue mobile