Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
Mehr...
Echte Walnuss; Originalkonturen
Klassische Walnuss bietet eine enge Übereinstimmung mit den originalen Fabrik-Schäften. Hochwertiges Holz mit geradem Maserungsmuster. 95% vorgefräst für eine einfache Anpassung an deine Aktion. Bereit für die finale Schleif-, Beiz- und Lackierung.
SPECS: Walnuss, gerade Maserung, keine Figur. Akzeptiert originale Hardware. Savage 94 Vorderschaft ist für .410 Bore ausgefräst; kann für 12 und 20 Gauge erweitert werden.
Mehr...
Kundenbewertungen zu WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 2.3
Original Buttplate Too Large(09.07.2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05.04.2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.
Artikel-Nr.: 984100311 WOOD PLUS BUTTSTOCK FITS SAVAGE 311 Herstellerproduktnummer: NONE Klassische Walnuss bietet eine enge Übereinstimmung mit den originalen Fabrik-Schäften. Hochwertiges Holz mit geradem Maserungsmuster. 95% vorgefräst für eine einfache Anpassung an deine Aktion. Bereit für die finale Schleif-, Beiz- und Lackierung.
94.9CHF0CHF 94.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 984100494 WOOD PLUS BUTTSTOCK FITS SAVAGE 94 Herstellerproduktnummer: NONE Klassische Walnuss bietet eine enge Übereinstimmung mit den originalen Fabrik-Schäften. Hochwertiges Holz mit geradem Maserungsmuster. 95% vorgefräst für eine einfache Anpassung an deine Aktion. Bereit für die finale Schleif-, Beiz- und Lackierung.
Classic walnut provides a close match to original factory stocks. Quality wood, has a straight grain pattern. 95% inletted for easy fitting to your action. Ready for final sanding, stain and finish.
SPECS: Walnut, straight grain, no figure. Accepts original hardware.Savage 94 forend comes relieved for .410 bore; can be opened up for 12 and 20 gauge.
Mehr...
Echte Walnuss; Originalkonturen
Klassische Walnuss bietet eine enge Übereinstimmung mit den originalen Fabrik-Schäften. Hochwertiges Holz mit geradem Maserungsmuster. 95% vorgefräst für eine einfache Anpassung an deine Aktion. Bereit für die finale Schleif-, Beiz- und Lackierung.
SPECS: Walnuss, gerade Maserung, keine Figur. Akzeptiert originale Hardware. Savage 94 Vorderschaft ist für .410 Bore ausgefräst; kann für 12 und 20 Gauge erweitert werden.
Mehr...
Kundenbewertungen zu WOOD PLUS BUTTSTOCK FITS SAVAGE 311
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 2.3
Original Buttplate Too Large(09.07.2015)
The original Savage/Stevens butt plate is too long for this replacement stock and extends over the heel . Nothing was offered to remedy this from Brownell's, except to return. The "finished" model has a smaller aftermarket butt plate, already attached for a bit more $$.
The wood was acceptable except for the cut marks on one side of the butt. Couldn't feather out because there wasn't enough wood to do so with the original butt plate.
Hopefully this stock will be reintroduced with the proper dimensions in the future.
I purchased this stock to finish myself,the classic model 12 lines on the top of the stock is not shaped into the wood.The stock is close to 1/2 inch to short to accept the repo or factory butt plate.The LOP is close to one inch shorter than the factory field stock.The stock is 1/4 inch wider than factory,not a big deal I could shape it on the belt sander.I can take off the wood but not add the wood to the short LOP and butt plate base.[...]I'm in a hunt club and I do competitive card shoots about every weekend and I like to talk guns !
Great Stock at a Good Price(05.04.2012)
I purchased one of these buttstocks for my Savage Model 720. The stock is listed to fit a Remington Model 11, It should also be listed to fit the Savage Model 720, as it fit very well and only needed a final fit, and finishing.The wood is listed as straight grain with no figure, however the one I recieved has enough straight grain to be very eye pleasing. I wood definately buy this stock again.