Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Weicht Filzrückstoss ab Verhindert Wangenprellungen
Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
Kundenbewertungen zu KICK-EEZ CHEEK-EEZ 3/16" THICK BLACK
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.
Artikel-Nr.: 440703316 KICK-EEZ CHEEK-EEZ 3/16" THICK BLACK Herstellerproduktnummer: 703-316730412000526 Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
37.9CHF0CHF 37.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Farbe:
Black
Finish:
Black
Hersteller/Modell:
Universal Rifles
Material:
Rubber
Versandgewicht: 0.077kgVersandhöhe: 10mmVersandbreite: 155mmVersandlänge: 168mm
Artikeldetails
Made in USA
Artikel-Nr.: 440703140 KICK-EEZ CHEEK-EEZ 1/4" THICK BLACK Herstellerproduktnummer: 703-140730412000564 Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
Artikel-Nr.: 440703116 KICK-EEZ CHEEK-EEZ 1/16" THICK BLACK Herstellerproduktnummer: 703-116703412000544 Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
29.9CHF0CHF 29.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Artikel-Nr.: 440703180 KICK-EEZ CHEEK-EEZ 1/8" THICK BLACK Herstellerproduktnummer: 703-180730412000557 Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
32.9CHF0CHF 32.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Peel and stick to any cheekpiece and put an end to feeling beat up and sore the day after shooting. Genuine, Sorbothane®, recoil absorbing rubber is pre-cut with an adhesive back to fit quickly on hard-kicking shotguns or rifles. Three thicknesses allow fast comb height adjustments.
Weicht Filzrückstoss ab Verhindert Wangenprellungen
Schälen und kleben Sie an jedem Backenstück und beenden Sie das Gefühl, am Tag nach dem Schiessen verprügelt und wund zu sein. Original Sorbothane®-Gummi mit Rückstossdämpfung ist mit einem selbstklebenden Rücken versehen, der sich schnell an hart umkämpften Schrotflinten oder Gewehren anbringen lässt. Drei Stärken ermöglichen eine schnelle Einstellung der Kammhöhe.
Kundenbewertungen zu KICK-EEZ CHEEK-EEZ 3/16" THICK BLACK
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.7
Simple, effective solution(12.01.2015)
Installed my first one on a MagPul PRS-G3 adjustable, tactical stock. Very simple to lay on and then razor trim to fit as I liked it. Softens the cold hardness of the cheek piece, and blends in exceptionally well. 2nd one placed on a Command Arms A-2 buttstock with similar ease and good fit/appearance. We'll add longevity comments in a few months.
cheek-eez - functions as described(30.11.2011)
put it on my remington 870 - 12ga for trap shooting. pro - works as designed. con - a little pricey
Must Have...(11.10.2013)
I use the Kick-Ezz pads on all my rifles with scopes and cannot get along without 'em. The 1/16" thick pad was ordered for a 2.5-10 Nikon scoped AR-15 using a shorter A1 stock. I carefully trimmed 1/2" off the forward portion of the pad which gave it a cleaner look on the shorter stock. To determine the location for the pad on an AR-15 you'll need to fully extend the charge handle and place a mark on the stock plus 1/8 inch otherwise the charge handle will contact the pad. I also recommend placing a centerline on the pad so to align it with the faint mold line that generally runs down the center of AR stocks. The adhesive on the pads is indeed sticky so knowing where to position it is very important. Align the pad to the center marks, press lightly and gradually lower the sides into position. Do not stretch the pad or allow it to kink. My scope has a 4" eye relief and is mounted using a cantilever mount which gave a comfortable cheek weld.