PALO VERDE GUNWORKS
ROSSI '92 SPRING KIT

100014510

This Rossi ’92 Spring Kit is simple enough for the novice to install and yet sophisticated enough for the professional Gunsmith to fine-adjust for individual guns. The kit includes the following features: Main Spring adjustable to 5 different tensions with approximately 8% changes in spring tension between settings and allows for fine adjusting of mainspring tension for individual rifles and ammunition. Two different strengths of ejector spring to allow the kit to serve both small and large calibers and to allow for individual adjustment. Springs are zinc coated to resist corrosion. Spring ends are closed and ground square to sit flat and square against other parts in the gun. The nylon bushings maintain spring alignment on both ends of the hammer strut, reduce friction, and provide an easy way to adjust the tension without cutting coils. Parts are color coded, and illustrated instructions are included for easy installation.

Mehr...

Dieses Rossi ’92 Federkit ist einfach genug für den Anfänger zu installieren und gleichzeitig raffiniert genug für den professionellen Gunsmith, um es für individuelle Gewehre fein einzustellen. Das Kit umfasst folgende Merkmale: Hauptfeder, die auf 5 verschiedene Spannungen einstellbar ist, mit ungefähr 8% Änderungen der Federkraft zwischen den Einstellungen und ermöglicht eine Feinjustierung der Hauptfederkraft für individuelle Gewehre und Munition. Zwei verschiedene Stärken der Auswerferfeder ermöglichen es, dass das Kit sowohl für kleine als auch grosse Kaliber geeignet ist und eine individuelle Anpassung ermöglicht. Die Federn sind zinkbeschichtet, um Korrosion zu widerstehen. Die Federenden sind geschlossen und quadratisch geschliffen, um flach und quadratisch gegen andere Teile der Waffe zu sitzen. Die Nylonbuchsen halten die Federausrichtung an beiden Enden des Hammerstruts, reduzieren die Reibung und bieten eine einfache Möglichkeit, die Spannung ohne das Schneiden von Windungen anzupassen. Die Teile sind farbcodiert, und eine illustrierte Anleitung ist enthalten, um die Installation zu erleichtern.

Mehr...

Kundenbewertungen zu PALO VERDE GUNWORKS ROSSI '92 SPRING KIT

Anzahl der Bewertungen: 6
Von brownells.com: 6
Durchschnittliche Bewertung: 5

Works like a charm (15.07.2014)

Just followed the instructions and works like a charm.

.357 R92 (12.11.2014)

Wow, the .357 R92 is now a joy to cycle. I initially put two blue bushing on the hammer spring (made for very light action) but was getting light strikes on hard primers. Now using two white bushings plus two red washers ( ~30% increase) to be reliable with hard primers. I can still cycle action with my pinky.

Great Kit (28.12.2014)

My Rossi '92 is a totally different gun, smooth as silk and drops cases at my feet. Went with the previous review and installed the 2 white and 2 red on my hammer spring and fires every time. I also polished and chamfered everything along with a little white lithium grease.

Will Smooth Up Your Rossi R92. (17.03.2015)

The Palo Verde kit includes all of the springs you need to smooth out the Rossi R92 action. The replacement main spring is very cleverly designed. It includes spacers that can be placed at either end of the spring to adjust tension and to help keep the spring straight as it slides down the strut. The instructions suggest which spacers you can use based on what caliber you shoot. I went with one blue, one white and obtain very solid strikes on every single primer.

The kit includes a choice of two correctly sized ejector springs that are much lighter than the factory spring. You choose based on the caliber of the round you use. I slightly smoothed the ejector "cutouts" when there is contact with the collar when the spring is compressed as suggested in the instructions and the rifle now drops the spent cases at my feet, or on the table at the lane at the range. It levers a lot smoother too - almost all of that "hitch" at the end of the forward throw when you are compressing the ejector spring is gone. A lot of the resistance you feel when levering the R92 is due to the heavy factory ejector spring and simply replacing this spring makes a huge difference.

I also changed the two other springs included in the kit, the "lever tension spring" and the "carrier stop spring". The result is a rifle that is silky smooth, but far from sloppy.

The included instructions give good advise on where you can polish critical interior parts as well as how to adjust the trigger spring for a less heavy pull. A replacement trigger spring is not included in the kit as the one in the rifle does a great job and only needs to be bent ever so slightly to lighten up the pull.

This kit is very well though out and cleverly designed. I recommend you install this spring kit before you break out a Dremel or sandpaper and start attacking the insides. You may find that this kit gets you where you want to go and you may only have to slightly polish interior parts that show obvious metal to metal contact. Sometimes it looks like the action is stiff because parts are rubbing when it's really the springs inside causing the tightness. I predict that you will like this kit if your intention is to smooth out the action on your Rossi R92.

Great kit (09.10.2015)

I installed this in my Rossi 357 mag and it is smoooooth now. In case anyone is wondering the carrier spring is in the part that lifts the shell into the breech. I love this kit and will order two more for my other rifles. I shoot cowboy competitions and is runs great.

Buy this Now (16.09.2017)

my stock Rossi was running slow and hard to close the last 1/2 "

this kit fixes a lot the problems! polish most metal too and your gun will be shooting fast and smooth .

Just wonder why Rossi cant do this from the factory

Lesen Sie 6 weitere Bewertungen bei brownells.com

59.9 59.9 1 CHF

Artikel-Nr.: 100014510
PALO VERDE GUNWORKS ROSSI '92 SPRING KIT
Herstellerproduktnummer: NONE Dieses Rossi ’92 Federkit ist einfach genug für den Anfänger zu installieren und gleichzeitig raffiniert genug für den professionellen Gunsmith, um es für individuelle Gewehre fein einzustellen. Das Kit umfasst folgende Merkmale: Hauptfeder, die auf 5 verschiedene Spannungen einstellbar ist, mit ungefähr 8% Änderungen der Federkraft zwischen den Einstellungen und ermöglicht eine Feinjustierung der Hauptfederkraft für individuelle Gewehre und Munition. Zwei verschiedene Stärken der Auswerferfeder ermöglichen es, dass das Kit sowohl für kleine als auch grosse Kaliber geeignet ist und eine individuelle Anpassung ermöglicht. Die Federn sind zinkbeschichtet, um Korrosion zu widerstehen. Die Federenden sind geschlossen und quadratisch geschliffen, um flach und quadratisch gegen andere Teile der Waffe zu sitzen. Die Nylonbuchsen halten die Federausrichtung an beiden Enden des Hammerstruts, reduzieren die Reibung und bieten eine einfache Möglichkeit, die Spannung ohne das Schneiden von Windungen anzupassen. Die Teile sind farbcodiert, und eine illustrierte Anleitung ist enthalten, um die Installation zu erleichtern.

59.9 CHF 10 CHF 59.90 *