Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

HOGUE
RUGER 10/22 RUBBER COVERED STOCK .920 BULL BARREL

743108220108 408220100

Cushioned Rubber Or Nylon Outer Skin Molded Over A Fiberglass Shell Cushioned rubber outer skin provides non-slip shooting comfort; internal fiberglass body gives solid support, is lightweight and easy to carry. Fully-inletted for a drop-in fit; models available to fit nominal .920" diameter bull barrels (B/B). Straight comb; wide, varmint-style forend with finger grooves, cobblestone finish on grip and forend; dual palm swells and recurve pistol grip make this stock as comfortable to shoot as it is practical. Includes rubber recoil pad, and front and rear sling studs.

Altro...

La pelle esterna in gomma o nylon imbottita è modellata su un guscio in fibra di vetro. La pelle esterna in gomma imbottita offre un comfort di tiro antiscivolo; il corpo interno in fibra di vetro fornisce un supporto solido, è leggero e facile da trasportare. Completamente fresato per un'installazione semplice; modelli disponibili per adattarsi a canne bull di diametro nominale .920" (B/B). Calcio dritto; perno anteriore largo in stile varmint con scanalature per le dita, finitura a ciottoli su impugnatura e perno anteriore; doppie protuberanze per il palmo e impugnatura a ricurva rendono questo calcio comodo da usare quanto pratico. Include un pad di rinculo in gomma e attacchi per cinghia anteriori e posteriori.

Altro...

Punteggi dei clienti per HOGUE RUGER 10/22 RUBBER COVERED STOCK .920 BULL FIBERGLASS BLK

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.5

This is the perfect stock!!! (05.01.2010)

Took a few minutes to install in order to get the fit perfect, but it was well worth the time. I'm buying a Mini 14 and will certainly get the same stock for it. This stock feels incredibly smooth, yet does not slip at all in your hands, and is lighter and about 100x more durable than wood. Would love to see Hogue make it for more rifles!

Beautiful Stock Beutiful Fit (25.05.2011)

My 10/22 dropped perfectly into this stock along with the .920 bull barrel that I also purchased. Everything is a flush fit and it is a very ergonomical and ambidextrous grip.I would recommend this stock to anyone who wants something more durable and comfortable than the original stock but doesn't want to spend a fortune.

Can't remove stains (16.08.2011)

The stock came with the rifle and had a stain on the left side of the forearm. I phoned Hogue about it and was told to wipe with WD 40. This did nothing. Feel and fit with a new .920" barrel are near perfect.

Great stock (26.07.2013)

Excellent stock for my 10/22 with bull barrel. Fit great, looks great, and feels even better. I love the rubber feel. It'll give you great grip when it gets wet.

Great Stock One Fore End Caveat (27.07.2013)

Built a 10/22 using:

Timney 10/22 Drop-In Trigger Assembly 883-000-038WB -- great trigger assembly, drop in with no fitting required. The lever magazine release is a great addition, helping with making the rifle a little more ambidextrous. The spring loaded bolt release works as we are accustomed to unlike the factory release. The trigger pull is crisp and clean reminiscent of the Jewel triggers on my 700. The trigger is a vast improvement over factory. 4 stars as the pull measured 3lbs on my Lyman gauge, preferred for hunting but as it is not adjustable I don't consider this a bench rest trigger.

ER Shaw Fluted 10/22 .920 Target Barrel, SS 100-004-747WB -- everything I was looking for. Looks great and shoots great. 1/2" groups at 75 yards on a 100 degree, 10 - 15 mph gusty day with 20 year old Remington Golden Bullet HP, very satisfying. The barrel dropped right into the action and was installed using the factory V-block without barrel droop. V-block barrel retaining screws screws were just snugged. Checked with a set of headspace gauges and everything was fine and good to go. A 5 star barrel for sure.

Hogue 10/22 Overmolded Rifle Stock B/B Rubber Covering 408-220-100WB -- The stock I wanted was out of stock so I got this one to do the build. I am liking it. Feels good in hand and on the shoulder. Ambidextrous! Bedding was accurate and felt solid. With the action screw torqued to 18 in-lbs the Shaw barrel was dollar bill free floated from 1" behind the flutes to the muzzle. The semi-varmint fore end is a joy in hand or on a bag. 4 Stars as the fore end will flex enough to touch the barrel with moderate straight line side hand pressure, a hasty sling or tight sling. Still I may well forget about the stock I wanted that cost 2-1/2 times as much, this one shoots and feels so good.

Volquartsen 10/22 Socket Head Takedown Screw 930-000-O26WB -- Comparing this screw to my factory screw it is about 2-1/2 threads shorter. However it fit this build just fine, earning it 5 Stars. It and the receiver handled 18 in-lbs of torque without problem.

All around great stock (07.04.2018)

Bought this to fit my new Mist 22 integral barrel/silencer and to give the gun a more modern look. There was a little fitting needed because the barrel was a little over .925 in diameter but just scraped it of with a sharp knife in about a minute and it fit fine. It feels great during shooting and just all around looks great, hard to beat the price too.

Leggi più recensioni su brownells.com

154.9 154.9 1 CHF

N. prodotto: 408220100
HOGUE RUGER 10/22 RUBBER COVERED STOCK .920 BULL FIBERGLASS BLK
Parti Fabbricante: 22010 743108220108 La pelle esterna in gomma o nylon imbottita è modellata su un guscio in fibra di vetro. La pelle esterna in gomma imbottita offre un comfort di tiro antiscivolo; il corpo interno in fibra di vetro fornisce un supporto solido, è leggero e facile da trasportare. Completamente fresato per un'installazione semplice; modelli disponibili per adattarsi a canne bull di diametro nominale .920" (B/B). Calcio dritto; perno anteriore largo in stile varmint con scanalature per le dita, finitura a ciottoli su impugnatura e perno anteriore; doppie protuberanze per il palmo e impugnatura a ricurva rendono questo calcio comodo da usare quanto pratico. Include un pad di rinculo in gomma e attacchi per cinghia anteriori e posteriori.

154.9 CHF 10 CHF 154.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Ruger Colore: Black Materiale: Fiberglass Modello: 10/22

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

La pelle esterna in gomma offre comfort di tiro antiscivolo e un supporto solido grazie al corpo in fibra di vetro.
Progettato per adattarsi a canne bull di diametro .920", con un forend largo in stile varmint e scanalature per le dita.
Include un pad di rinculo in gomma e attacchi per slitta anteriori e posteriori per una maggiore praticità.

Caratteristiche

Adatto per: Ruger Colore: Black Materiale: Fiberglass Modello: 10/22 Peso della spedizione: 1.111kg Altezza di spedizione: 64mm Larghezza di spedizione: 178mm Lunghezza di spedizione: 889mm UPC : 743108220108

Dettagli dell'elemento

Classificazione per l'export dagli US: 0A501.y.1

Scopri il calcio in gomma HOGUE per Ruger 10/22. Comfort antiscivolo e supporto in fibra di vetro. 🎯 Facile da installare e trasportare!

Altro...

Punteggi dei clienti per HOGUE RUGER 10/22 RUBBER COVERED STOCK .920 BULL FIBERGLASS BLK

Numero di punteggi: 6
Da brownells.com: 6
Punteggio medio: 4.5

This is the perfect stock!!! (05.01.2010)

Beautiful Stock Beutiful Fit (25.05.2011)

Can't remove stains (16.08.2011)

Great stock (26.07.2013)

Excellent stock for my 10/22 with bull barrel. Fit great, looks great, and feels even better. I love the rubber feel. It'll give you great grip when it gets wet.

Great Stock One Fore End Caveat (27.07.2013)