Plus de 300 000 clients - nous vous disons merci !

40 000+ produits pour la chasse et le tir sportif

EGW
RUGER® MK I, II, III, IV, P85, P90 TRIJICON RMR SIGHT MOUNT

841370116522 296000580
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
79.9 79.9 1 CHF
Référence: 296000580
EGW RUGER® MKI, II, III, IV, P85, P90 TRIJICON RMR SIGHT MOUNT
Ref Fabricant: 49521 841370116522
79.9 CHF 4 CHF 79.90 *
Délai de livraison environ 8-15 jours depuis l'entrepôt des États-Unis.
Caractéristiques: Couleur: Noir Manufacture: Ruger Matériaux: Aluminum Modèle: Mark III, Mark I, Mark II, P89, 22/45, Mark IV, P85, P97 Nombre d'Embases: 1-Pièce Style: Tactique

Caractéristiques

Couleur: Noir Manufacture: Ruger Matériaux: Aluminum Modèle: 22/45,Mark I,Mark II,Mark III,Mark IV,P85,P89,P97 Nombre d'Embases: 1-Pièce Style: Tactique Poids du colis: 0.032kg Hauteur d'expédition: 25mm Largeur d'expédition: 76mm Longueur d'expédition: 133mm UPC : 841370116522

Détails de l'article

Fabriqué au USA



Améliore ton tir avec le support de viseur TRIJICON RMR pour RUGER® MK I-IV et P85/P90. ✨ Conçu en aluminium robuste et élégant.

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.
Retour en haut de page