Holds mainspring in alignment, prevents spring kink and binding for consistent hammer drop and improved ignition. Round strut helps provide a confidence-inspiring, smoother feel when cocking. Saves time and effort, eliminates the filing and polishing necessary to remove the burrs and rough edges on the stamped, factory part. Pre-assembled with a 17 pound Wolff hammer spring and ready to drop in.
SPECS: Steel. Fits Blackhawk, Super Blackhawk and Old Vaquero. Will not fit the New Vaquero with the smaller grip frame.
Mehr...
Sorgt für sanfteres Spannen und konsistenten Hammerabwurf
Hält die Hauptfeder in Ausrichtung, verhindert ein Verdrehen und Klemmen der Feder für einen konsistenten Hammerabwurf und verbesserte Zündung. Der runde Stift sorgt für ein selbstbewusstes, sanfteres Gefühl beim Spannen. Spart Zeit und Mühe, beseitigt das Feilen und Polieren, das notwendig ist, um die Grate und rauen Kanten des gestanzten, werkseitigen Teils zu entfernen. Vorinstalliert mit einer 17-Pfund Wolff-Hammerfeder und bereit zum Einsetzen.
TECHNISCHE DATEN: Stahl. Passt für Blackhawk, Super Blackhawk und Old Vaquero. Passt nicht für den New Vaquero mit dem kleineren Griffrahmen.
Mehr...
Kundenbewertungen zu BROWNELLS RUGER® ROUND HAMMER STRUT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 5
Easiest upgrade for New Model Blackhawks(24.08.2009)
Being a captured spring, removal of the old and installation of the new is easy. A tiny drop of oil on the round end where it meets the hammer helps. Still plenty of spring power compared to the stock 24 pound spring to reliably ignite the hard primers of .45ACP GI rounds. This will also take off about 2 pounds of trigger pull due to reduced pressure on the sear surfaces.
Should be factory standard!(09.02.2010)
Bought this to replace the Ruger factory part that was a joke. The head of the strut was poorly ground and had flat facets on it. I made an attempt to smooth it, and it did help some, it was still somewhat "gritty" feeling when cocking. I also didn't care for the wear patterns of the flat shank that the spring rode upon. This Brownell's part having a smooth consistent finish over the entire part has made a world of difference in and of itself. The head is smooth and well polished which aids in smooth, consistent cocking. The body being well rounded has no edges or corners to snag the spring improving the overal general feel of the revolver. My trigger pull has gone from a gritty 5 lbs to a crisp, clean 3.5 lbs. Cocking the revolver is smooth and easy though for my tastes the 17lb spring is a bit light. I replaced it with a 19lb Power Custom spring. I have been tempted to try out the factory spring to see how smooth it feels.
Works great! Drop In Part(29.11.2010)
This part works great. I have a limited edition "Flat Top" Bisley .44 special. The stock mainspring was way to heavy resulting in a significant effort to work the hammer back along with heavy hammer fall that tends to jar the sight alignment on impact to the firing pin. This drop in part works as advertised---easy to install and makes a big difference in level of effort to work the hammer and smoothness of the hammer fall. I've had no issues with "light strikes" I handload all my ammo with Federal primers. Combine this part with a Wolff 30 ounce trigger return spring and you'll have a decent trigger. Buyer beware--this part may not work on the limited edition XR-3 frames with the modular trigger lock inside the grip frame.
Artikel-Nr.: 078000019 BROWNELLS RUGER® ROUND HAMMER STRUT050806104952 Hält die Hauptfeder in Ausrichtung, verhindert ein Verdrehen und Klemmen der Feder für einen konsistenten Hammerabwurf und verbesserte Zündung. Der runde Stift sorgt für ein selbstbewusstes, sanfteres Gefühl beim Spannen. Spart Zeit und Mühe, beseitigt das Feilen und Polieren, das notwendig ist, um die Grate und rauen Kanten des gestanzten, werkseitigen Teils zu entfernen. Vorinstalliert mit einer 17-Pfund Wolff-Hammerfeder und bereit zum Einsetzen.
39.9CHF0CHF 39.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Made in USA
US-Exportklassifizierung: 0A501.x
Dieses Produkt unterliegt der Aufsicht der Regierung der Vereinigten Staaten von Amerika und ist ausschliesslich für den Export in das Bestimmungsland zur Verwendung durch den endgültigen Empfänger oder Endverbraucher, der beim Kauf festgelegt wird, bestimmt. Dieses Produkt darf ohne vorherige Erlaubnis der Regierung der Vereinigten Staaten von Amerika oder einer autorisierten US-Behörde über den endgültigen Empfänger oder Endverbrauchers hinaus nicht wiederverkauft, übertragen, oder in einer anderen Weise in Drittländer oder an Dritte überlassen werden. Dies gilt auch dann, wenn die Artikel verbaut bzw. in einen anderen Artikel integriert wurde.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Entdecke den RUGER® SA Round Hammer Strut von BROWNELLS! 🔧 Für konsistenten Hammerabwurf und einfache Installation. Jetzt optimieren!
Holds mainspring in alignment, prevents spring kink and binding for consistent hammer drop and improved ignition. Round strut helps provide a confidence-inspiring, smoother feel when cocking. Saves time and effort, eliminates the filing and polishing necessary to remove the burrs and rough edges on the stamped, factory part. Pre-assembled with a 17 pound Wolff hammer spring and ready to drop in.
SPECS: Steel. Fits Blackhawk, Super Blackhawk and Old Vaquero. Will not fit the New Vaquero with the smaller grip frame.
Mehr...
Sorgt für sanfteres Spannen und konsistenten Hammerabwurf
Hält die Hauptfeder in Ausrichtung, verhindert ein Verdrehen und Klemmen der Feder für einen konsistenten Hammerabwurf und verbesserte Zündung. Der runde Stift sorgt für ein selbstbewusstes, sanfteres Gefühl beim Spannen. Spart Zeit und Mühe, beseitigt das Feilen und Polieren, das notwendig ist, um die Grate und rauen Kanten des gestanzten, werkseitigen Teils zu entfernen. Vorinstalliert mit einer 17-Pfund Wolff-Hammerfeder und bereit zum Einsetzen.
TECHNISCHE DATEN: Stahl. Passt für Blackhawk, Super Blackhawk und Old Vaquero. Passt nicht für den New Vaquero mit dem kleineren Griffrahmen.
Mehr...
Kundenbewertungen zu BROWNELLS RUGER® ROUND HAMMER STRUT
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 5
Easiest upgrade for New Model Blackhawks(24.08.2009)
Being a captured spring, removal of the old and installation of the new is easy. A tiny drop of oil on the round end where it meets the hammer helps. Still plenty of spring power compared to the stock 24 pound spring to reliably ignite the hard primers of .45ACP GI rounds. This will also take off about 2 pounds of trigger pull due to reduced pressure on the sear surfaces.
Should be factory standard!(09.02.2010)
Bought this to replace the Ruger factory part that was a joke. The head of the strut was poorly ground and had flat facets on it. I made an attempt to smooth it, and it did help some, it was still somewhat "gritty" feeling when cocking. I also didn't care for the wear patterns of the flat shank that the spring rode upon. This Brownell's part having a smooth consistent finish over the entire part has made a world of difference in and of itself. The head is smooth and well polished which aids in smooth, consistent cocking. The body being well rounded has no edges or corners to snag the spring improving the overal general feel of the revolver. My trigger pull has gone from a gritty 5 lbs to a crisp, clean 3.5 lbs. Cocking the revolver is smooth and easy though for my tastes the 17lb spring is a bit light. I replaced it with a 19lb Power Custom spring. I have been tempted to try out the factory spring to see how smooth it feels.
Works great! Drop In Part(29.11.2010)
This part works great. I have a limited edition "Flat Top" Bisley .44 special. The stock mainspring was way to heavy resulting in a significant effort to work the hammer back along with heavy hammer fall that tends to jar the sight alignment on impact to the firing pin. This drop in part works as advertised---easy to install and makes a big difference in level of effort to work the hammer and smoothness of the hammer fall. I've had no issues with "light strikes" I handload all my ammo with Federal primers. Combine this part with a Wolff 30 ounce trigger return spring and you'll have a decent trigger. Buyer beware--this part may not work on the limited edition XR-3 frames with the modular trigger lock inside the grip frame.