Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Mehr...
Einzigartiges Design verbessert den Ablauf, reduziert den Abzugswiderstand
Verringert den Abzugswiderstand und den Spannaufwand für schnelles, präzises Schiessen. Das offene Zentrum erhält die Haltbarkeit der Werksspring, bietet konsistente, gleichmässige Federkraft.
SPECS: Federstahl. Colt/EMF passt für Colt Cowboy und Single Action Army, EMF Hartford. Uberti passt für private-label, SAA Klone, die von Uberti hergestellt werden. Möglicherweise ist eine geringfügige Anpassung erforderlich.
Mehr...
Kundenbewertungen zu WOLFF COLT/EMF MAINSPRING
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory
Artikel-Nr.: 969322800 WOLFF COLT/EMF MAINSPRING Herstellerproduktnummer: 32280 Verringert den Abzugswiderstand und den Spannaufwand für schnelles, präzises Schiessen. Das offene Zentrum erhält die Haltbarkeit der Werksspring, bietet konsistente, gleichmässige Federkraft.
32.9CHF8CHF 32.90
*
Lieferzeit ca. 8-15 Tage aus dem Lager USA.
Eigenschaften:Hersteller/Modell: ColtModell: Single Action Army
Hersteller/Modell:
Colt
Modell:
Single Action Army
Versandgewicht: 0.014kgVersandhöhe: 13mmVersandbreite: 69mmVersandlänge: 137mm
Artikeldetails
Made in USA
Artikel-Nr.: 969322850 WOLFF UBERTI MAINSPRING Herstellerproduktnummer: 32285 Verringert den Abzugswiderstand und den Spannaufwand für schnelles, präzises Schiessen. Das offene Zentrum erhält die Haltbarkeit der Werksspring, bietet konsistente, gleichmässige Federkraft.
35.9CHF0CHF 35.90
*
Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.
Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Mehr...
Einzigartiges Design verbessert den Ablauf, reduziert den Abzugswiderstand
Verringert den Abzugswiderstand und den Spannaufwand für schnelles, präzises Schiessen. Das offene Zentrum erhält die Haltbarkeit der Werksspring, bietet konsistente, gleichmässige Federkraft.
SPECS: Federstahl. Colt/EMF passt für Colt Cowboy und Single Action Army, EMF Hartford. Uberti passt für private-label, SAA Klone, die von Uberti hergestellt werden. Möglicherweise ist eine geringfügige Anpassung erforderlich.
Mehr...
Kundenbewertungen zu WOLFF COLT/EMF MAINSPRING
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory