Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Plus...
Conception Unique qui Adoucit l'Action, Réduit la Pression de la Détente
Allège la pression de la détente et l'effort de percussion pour un tir rapide et précis. Le centre ouvert conserve la durabilité du ressort d'origine, offrant une tension de ressort constante et uniforme.
SPECS : Acier à ressort. Colt/EMF s'adapte aux Colt Cowboy et Single Action Army, EMF Hartford. Uberti s'adapte aux modèles privés, clones SAA fabriqués par Uberti. Peut nécessiter un ajustement mineur.
Plus...
Évaluations client de WOLFF COLT/EMF MAINSPRING
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory
Référence: 969322800 WOLFF COLT/EMF MAINSPRING Ref Fabricant: 32280 Allège la pression de la détente et l'effort de percussion pour un tir rapide et précis. Le centre ouvert conserve la durabilité du ressort d'origine, offrant une tension de ressort constante et uniforme.
32.9CHF0CHF 32.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Caractéristiques:Manufacture: ColtModèle: Single Action Army
Manufacture:
Colt
Modèle:
Single Action Army
Poids du colis: 0.014kgHauteur d'expédition: 13mmLargeur d'expédition: 69mmLongueur d'expédition: 137mm
Détails de l'article
Fabriqué au USA
Référence: 969322850 WOLFF UBERTI MAINSPRING Ref Fabricant: 32285 Allège la pression de la détente et l'effort de percussion pour un tir rapide et précis. Le centre ouvert conserve la durabilité du ressort d'origine, offrant une tension de ressort constante et uniforme.
35.9CHF0CHF 35.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
Lightens trigger pull and cocking effort for fast, accurate shooting. Open center retains durability of factory spring, gives consistent, uniform, spring tension.
SPECS: Spring steel. Colt/EMF fits Colt Cowboy and Single Action Army, EMF Hartford. Uberti fits private-label, SAA clones made by Uberti. May require minor fitting.
Plus...
Conception Unique qui Adoucit l'Action, Réduit la Pression de la Détente
Allège la pression de la détente et l'effort de percussion pour un tir rapide et précis. Le centre ouvert conserve la durabilité du ressort d'origine, offrant une tension de ressort constante et uniforme.
SPECS : Acier à ressort. Colt/EMF s'adapte aux Colt Cowboy et Single Action Army, EMF Hartford. Uberti s'adapte aux modèles privés, clones SAA fabriqués par Uberti. Peut nécessiter un ajustement mineur.
Plus...
Évaluations client de WOLFF COLT/EMF MAINSPRING
Nombre d'évaluations: 3
De brownells.com: 3
Note moyenne: 3.7
Just Right(09.07.2013)
At first, I tried the Lee Gunslinger spring set in my 3rd generation Colt SAA which is chambered in 45 Colt. The springs made the action feel sweet but light primer hits were a problem with the Remington large pistol primers I use. I ordered the Wolff mainspring and kept the wire trigger spring from the Lee set. I think I have a great combination now as the hammer is still lighter to pull than with the factory spring and the gun feels very "slick". I love the feel of my Colt SAA with the Wolff mainspring. It installed easily without any fitting and ordering from Brownell's is always a pleasure.
Also works in an Uberti 1858 Remington(22.10.2013)
I bought this spring for use with a Taylor's conversion cylinder. It fit my Uberti Remington perfectly. The action is much smoother, and the cylinder's firing pins are no longer getting battered.
WILL NOT FIT my EMF !!!(08.06.2015)
I ordered this for an EMF Hartford 45 Colt. There was an obvious problem as the length was way too short ! The overall length falls between the factory spring and the length of a factory