Il Carrello è vuoto.

Carrello

Aiuto e contatti

Spedizione gratuita con ordini superiori ad CHF 399

Politica di restituzione di 100 giorni

Newsletter

Offerte

Oltre 300.000 clienti - vi ringraziamo!

4,93/5 "Molto buono" (1400+ recensioni)

Oltre 40.000 prodotti per caccia e sport di tiro

XS SIGHT SYSTEMS
STANDARD DOT TRITIUM SIGHTS FOR RUGER®

647533038317 006000171

Replacement front sights have a high-visibility white outline surrounding a Tritium insert for easy sight acquisition in all types of ambient light—from bright sunlight to nighttime, and anything in between. Low, streamlined, no-snag shape makes these sights excellent for concealed carry guns. Model available for Ruger® LCR®.

SPECS: Machined steel, matte black finish. LCR - .110" (2.8mm) dia. dot. Gunsmith installation recommended.

Altro...

Le mire frontali di ricambio hanno un contorno bianco ad alta visibilità che circonda un inserto in Tritium per una facile acquisizione del mirino in tutti i tipi di luce ambientale, dalla luce solare intensa alla notte, e tutto ciò che c'è in mezzo. La forma bassa, aerodinamica e senza spigoli rende queste mire eccellenti per le armi da portare nascoste. Modello disponibile per Ruger® LCR®.

SPECIFICHE: Acciaio lavorato, finitura nera opaca. LCR - .110" (2.8mm) di diametro. Si consiglia l'installazione da parte di un armaiolo.

Altro...

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.6

JUST WHAT YOUR CARRY WEAPON WANTS (30.12.2011)

EXCELLENT SIGHTS,CAN BE INSTALLED WITH THE RIGHT TOOLS AND SOME PATIENCE.VERY GOOD DIRECTIONS ON INSTALL.LOW LIGHT OR NO LIGHT VISIBILITY. JUST WHAT ANY CARRY OR PERSONEL PROTECTION WEAPON SHOULD HAVE. A+++++++++++

Excellent Replacement Sight for LCR (08.04.2012)

I purchased a LCR for my wife as a CCW, and I was not really satisfied with the stock sight. It was decent enough, but I think for CCW low light performance is a must. So after some reading I decided on this one.

The package comes with: 1) The Sight, 2) a new roll pin, 3) a punch, and 4) a small tube of blue loctite.

Installation took a total of 20 minutes, and I am far from a "handy man". I won't go into the details of the installation, because the supplied instructions are very detailed (including pictures). I would give 2 pieces of advice for those of you that aren't gunsmiths and don't have all the fancy tools.

1) Get a roll of masking tape to hold the gun in place while you punch out / replace the roll pin. The cylinder sits perfectly inside the roll, it holds steady, and won't hurt the guns finish at all.

2) Get a real, GOOD punch. The one supplied works well enough for removing the stock roll pin, but was a terrible pain to replace the new pin. I knocked the old pin out with 2 hits, but the pin was bent in the process (yes after 2 hits). I was able to get the new pin started with the bent pin, but could not finish driving it. I got a larger sized punch to cover the whole head of the pin; 1 smack and the sight was ready to roll.

Lastly, this sight is not lined up like a standard revolver sight. Originally, you put the tip of the post under what you wanted to hit. With this, you put the center of the "dot" on top of your target. This is excellent for CCW and man sized targets. However, if you are using this a range queen, hitting steel plates at a distance takes some getting used to.

*Note* - I will assume all guns are different, but this is my experience with the sight. XS says to lay the white of the dot down inside the rear sight notches. This was not the true (in my case). I actually have to put the white of the dot on the top of the rear sight notches. Just something to consider if you buy it and can't seem to hit anything (I know I couldn't! haha).

All in all, I am very pleased with this sight, and yes I would purchase it again.

Then there was Light!!!!!!! (16.08.2012)

Easy to install, took me about 20 minutes. (Zero gunsmithing abilities at all)

Comes with a punch but it eventually broke (can't complain too much about that because most items you buy don't come with tools!)

Looks great, sight picture is much better (have not fired yet)

Glows nicely in pitch black room.

I tried to use roll pin from LCR I took out but it ended up mushrooming so I used the supplied one and it fit and works fine.

Highly recommend this to any LCR owners!

Nothing like quick service (01.04.2013)

I ordered this last Friday after lunch and it arrived today.(Monday)

I installed it this evening. No problems. I read where the punch is getting bent. I always use a lot of light taps to remove this type of pin. After removing the old pin, the supplied punch looks like it came out of the package.

I do recommend that you start the pin in the sight just enough to hold it but not enough to keep it from seating on the top of the LCR. This makes it easier to finish the install. I also recommend that you use a hammer with an alluminum head as this will not damage the pin or your LCR.

When I installed the pin, I used the fat end of the supplied punch to seat it, again using several taps that are not hard enough to bend the punch.

I hope that this helps others to avoid problems that others had.

sight is good but no extra pin (17.07.2015)

Leggi più recensioni su brownells.com

114.9 114.9 1 CHF

N. prodotto: 006000171
XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY
Parti Fabbricante: RP-0008N-4 647533038317 Le mire frontali di ricambio hanno un contorno bianco ad alta visibilità che circonda un inserto in Tritium per una facile acquisizione del mirino in tutti i tipi di luce ambientale, dalla luce solare intensa alla notte, e tutto ciò che c'è in mezzo. La forma bassa, aerodinamica e senza spigoli rende queste mire eccellenti per le armi da portare nascoste. Modello disponibile per Ruger® LCR®.

114.9 CHF 4 CHF 114.90 *

Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.

Caratteristiche: Adatto per: Ruger Modello: LCR Tipo: Dot, Low-Profile, Mira notturna

Aggiungi alla lista degli acquisti

Domande

Dettagli

Aggiungi alla lista degli acquisti

Domande

Top takeaways

Le mire anteriori hanno un contorno bianco ad alta visibilità con inserto in Tritium per una facile acquisizione in tutte le condizioni di luce.
Design basso e aerodinamico, ideale per armi da porto occulto.
Realizzate in acciaio lavorato con finitura nera opaca, installazione da parte di un armaiolo consigliata.

Caratteristiche

Adatto per: Ruger Modello: LCR Tipo: Dot,Low-Profile,Mira notturna Peso della spedizione: 0.068kg Altezza di spedizione: 41mm Larghezza di spedizione: 122mm Lunghezza di spedizione: 198mm UPC : 647533038317

Dettagli dell'elemento

Made in Usa

Scopri le mire tritium standard per Ruger LCR: alta visibilità e design aerodinamico per una mira precisa in ogni condizione! 🌙

SPECS: Machined steel, matte black finish. LCR - .110" (2.8mm) dia. dot. Gunsmith installation recommended.

Altro...

SPECIFICHE: Acciaio lavorato, finitura nera opaca. LCR - .110" (2.8mm) di diametro. Si consiglia l'installazione da parte di un armaiolo.

Altro...

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 4.6

JUST WHAT YOUR CARRY WEAPON WANTS (30.12.2011)

Excellent Replacement Sight for LCR (08.04.2012)

Then there was Light!!!!!!! (16.08.2012)

Nothing like quick service (01.04.2013)

sight is good but no extra pin (17.07.2015)

Leggi più recensioni su brownells.com

Scelti da altri clientie

BROWNELLS

BROWNELLS T-SHIRT 12"X12" SQUARE CLEANING WIPES 36/PACK
"T" SHIRT SQUARES

Tessuti assorbenti

Riordinato

CHF 54.90

Scopri il SINCLAIR AR-15 Rod Guide e Link Kit per una pulizia facile e efficace del tuo AR-15. 🔧 Realizzato in Delrin e acciaio inossidabile!

SINCLAIR INTERNATIONAL

SINCLAIR INTERNATIONAL CLEANING LINK FOR AR-15
CLEANING LINK FOR AR-15

Utensili per la pulizia

4.9

In magazzino

CHF 22.90

XS SIGHT SYSTEMS
STANDARD DOT TRITIUM SIGHTS FOR RUGER®

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Top takeaways

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS FOR RUGER®

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Top takeaways

Caratteristiche

Dettagli dell'elemento

Punteggi dei clienti per XS SIGHT SYSTEMS STANDARD DOT TRITIUM SIGHTS-RUGER LCR .38/.357 ONLY

Collegare

Metodi di pagamento sicuri

Associazioni di categoria

Benvenuti!

XS SIGHT SYSTEMS
STANDARD DOT TRITIUM SIGHTS FOR RUGER®