Forster makes a collet style bullet puller for standard seven eigths thru 14 threaded presses and a second collet style puller (both use the same Forster collets) for the Co-Ax Press. The FBP1010 puller for standard presses includes a collet tightening handle on top of the puller body. The FUP1010 Puller has a nine sixteenths inch hex top on the puller body which requires a wrench to tighten the collet. Both pullers easily remove bullets from almost any cartridge. Collets are sold separately.
Mehr...
Forster stellt einen Collet-Bullet Puller für Standardpressen mit einem Gewinde von sieben Achtel bis 14 her. Ausserdem gibt es einen zweiten Collet-Puller (beide verwenden die gleichen Forster-Collets) für die Co-Ax Press. Der FBP1010 Puller für Standardpressen enthält einen Collet-Ziehgriff oben am Puller-Gehäuse. Der FUP1010 Puller hat einen Sechzehntel-Zoll-Sechskant oben am Puller-Gehäuse, der einen Schraubenschlüssel zum Festziehen des Collets erfordert. Beide Puller entfernen problemlos Geschosse aus fast jeder Patrone. Collets werden separat verkauft.
Mehr...
Kundenbewertungen zu FORSTER PRODUCTS, INC. STANDARD BULLET PULLER, COLLETS NOT INCLUDED
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Excellent value, and results.(27.07.2012)
Needed to pull 80 .308 Win. rounds. Collets were on back order for the Hornady Puller I already own, so I went with the Forster, which was less money, and had .308 collets in stock. Once a "feel" for the tool was established, I was able to pull four bullets per minute with two bullets out of 80 being marked by the collet. The other 78 were spotless, and reusable. This a nice tool, and a bargain besides.
Herter's bullet puller is the same...(25.04.2018)
I began reloading in 1967, using my Dad's reloading press and supplies. He was a big fan of Herter's products, which was a major mail order company in the 1950's through the 70's.
I still have his reloading equipment and use it often. One item I use is a bullet puller marked "Herter's" but it is identical to this Forster made puller. In fact, I suspect that Forster made them for Herter's.
The Forster Collets fit my Herter's bullet puller and work fine. Amazing that this tool has remained unchanged and so useful for over 50 years!
Artikel-Nr.: 749002543 FORSTER PRODUCTS, INC. STANDARD BULLET PULLER, COLLETS NOT INCLUDED Herstellerproduktnummer: BP1010757253002946 Forster stellt einen Collet-Bullet Puller für Standardpressen mit einem Gewinde von sieben Achtel bis 14 her. Ausserdem gibt es einen zweiten Collet-Puller (beide verwenden die gleichen Forster-Collets) für die Co-Ax Press. Der FBP1010 Puller für Standardpressen enthält einen Collet-Ziehgriff oben am Puller-Gehäuse. Der FUP1010 Puller hat einen Sechzehntel-Zoll-Sechskant oben am Puller-Gehäuse, der einen Schraubenschlüssel zum Festziehen des Collets erfordert. Beide Puller entfernen problemlos Geschosse aus fast jeder Patrone. Collets werden separat verkauft.
Forster makes a collet style bullet puller for standard seven eigths thru 14 threaded presses and a second collet style puller (both use the same Forster collets) for the Co-Ax Press. The FBP1010 puller for standard presses includes a collet tightening handle on top of the puller body. The FUP1010 Puller has a nine sixteenths inch hex top on the puller body which requires a wrench to tighten the collet. Both pullers easily remove bullets from almost any cartridge. Collets are sold separately.
Mehr...
Forster stellt einen Collet-Bullet Puller für Standardpressen mit einem Gewinde von sieben Achtel bis 14 her. Ausserdem gibt es einen zweiten Collet-Puller (beide verwenden die gleichen Forster-Collets) für die Co-Ax Press. Der FBP1010 Puller für Standardpressen enthält einen Collet-Ziehgriff oben am Puller-Gehäuse. Der FUP1010 Puller hat einen Sechzehntel-Zoll-Sechskant oben am Puller-Gehäuse, der einen Schraubenschlüssel zum Festziehen des Collets erfordert. Beide Puller entfernen problemlos Geschosse aus fast jeder Patrone. Collets werden separat verkauft.
Mehr...
Kundenbewertungen zu FORSTER PRODUCTS, INC. STANDARD BULLET PULLER, COLLETS NOT INCLUDED
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 5
Excellent value, and results.(27.07.2012)
Needed to pull 80 .308 Win. rounds. Collets were on back order for the Hornady Puller I already own, so I went with the Forster, which was less money, and had .308 collets in stock. Once a "feel" for the tool was established, I was able to pull four bullets per minute with two bullets out of 80 being marked by the collet. The other 78 were spotless, and reusable. This a nice tool, and a bargain besides.
Herter's bullet puller is the same...(25.04.2018)
I began reloading in 1967, using my Dad's reloading press and supplies. He was a big fan of Herter's products, which was a major mail order company in the 1950's through the 70's.
I still have his reloading equipment and use it often. One item I use is a bullet puller marked "Herter's" but it is identical to this Forster made puller. In fact, I suspect that Forster made them for Herter's.
The Forster Collets fit my Herter's bullet puller and work fine. Amazing that this tool has remained unchanged and so useful for over 50 years!