Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES

757253999789 749006729

Forster Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. The Forster Ultra Seater includes all of the features of the Forster Bench Rest Seater Die above, plus an ultra accurate micrometer adjustment. This micrometer adjustment allows you to adjust bullet seating depth from .0005 inch to .001 inch increments, and makes switching bullets easy - just dial back to your previous recorded setting. Forster Ultra Seaters make fine tuning your bullets to the lands of your rifling simple.

Mehr...

Die Forster Wiederlade Dies sind von hervorragender Qualität und ermöglichen es dir, immer wieder konzentrische Hülsen zu produzieren. Jede Patrone wird aus hochwertigem Stahl hergestellt, der sorgfältig mit sehr engen Toleranzen bearbeitet wird. Die Dies werden sowohl vor als auch nach dem Wärmebehandlungsprozess von Hand poliert, um eine extra feine Oberfläche zu garantieren. Alle Forster Wiederlade Dies verfügen über den Forster Cross Bolt Die Locking Ring, der die beiden Enden des geteilten Rings anzieht, anstatt eine Schraube direkt in die Gewinde des Dies zu drehen. Der Forster Ultra Seater umfasst alle Funktionen des Forster Bench Rest Seater Dies, zusätzlich zu einer ultra genauen Mikrometerverstellung. Diese Mikrometerverstellung ermöglicht es dir, die Geschoss Sitztiefe in Schritten von .0005 Zoll bis .001 Zoll anzupassen und macht den Wechsel von Geschossen einfach - du drehst einfach auf deine vorherige aufgezeichnete Einstellung zurück. Forster Ultra Seater machen das Feintuning deiner Geschosse auf die Züge deiner Laufbohrung einfach.

Mehr...

Kundenbewertungen zu FORSTER PRODUCTS, INC. 204 RUGER MICROMETER SEATER DIE

Anzahl der Bewertungen: 9
Von brownells.com: 8
Durchschnittliche Bewertung: 4.3

Excellent (03.11.2019)

Run out around 0.001 most If not all below 0.002. some variance in length 0.003 with eldx but only part of it is to blame on the die. Micrometer might not be necessary but for me makes it a lot easier to find the settings

Good..Better...Best (09.02.2011)

If I could give this product more than 5 stars then I would...And it deserves it...
Similar products claim to do a good job but simply put, there is no concentricity issues at all with these dies...
When the handle on the press is operated it is a single fluid motion that seats the projectile.
My reloads are now more accurate than I have ever made them.
EVERY reloader should have one of these.
ABRACADABRA is usually a word saved for magicians but is truely at home with Forster products. In fact, I think they should change the dictionary to say ABRACADABRA & FORSTER mean the same thing.

The Best I've Found (18.12.2011)

I wish they made these for pistols!!! Perfect bullet alignment, and due to the design you can compact the powder, unlike with some other designs. The fact that it is one of the less expensive choices is an added plus. Always perfect OAL and perfectly repeatable. The only choice, in my opinion.

Does not work in a Dillon 1050 press (20.04.2016)

Seems well made, but I couldn't use it with my 1050. That needs to be in the description.

Good but needed some work (04.05.2017)

I use this to load for my AR, a Ruger Ranch Rifle and a TC Encore. It works fine but when I first received it some work was needed. I noticed that the sliding sleeve would catch partway up and found that the roll marking on the bottom of the sleeve was raised sufficiently to drag on the outer housing. It was significant and I have no doubt it would have caused issues. Also, the seater plug had a ridge around the bottom where the bullet entered that cause significant drag in the sleeve. A bit of careful stoning made things better although the seater still feels a bit rough in the sleeve. Roll marking after precision machining on the sleeve seems like a real bad idea.

Good die but not for VLD bullets (12.05.2018)

I have several of these Forster Ultra Micrometer Seating Dies in various calibers. All have worked very well with standard weight for caliber bullets of conventional shape. I bought this die to seat heavy for caliber bullets in a .223 bolt gun. Although the 80 grain Sierra Match King bullet is not technically a VLD design the seating stem of this die would not engage the bullet consistently. Seating depths would vary by a much as 10 thousandths of an inch. Sometimes the bullet tip would bottom out inside the cup of the seating stem. After diagnosing the problem I discovered Forster does not have a VLD stem available. I returned this die to Brownells and purchased another manufacturer's die that has a VLD stem. This is a very good seating die but perhaps not appropriate for long profile bullets.

Best I've Found (18.12.2011)

Forster ultra seater 300WM (12.04.2011)

Easily adjustable O.A.L., Outstanding concentricity!

Forster Micrometer seater die - .223 Rem (19.12.2016)

I purchased a Foster "micrometer seating die" (.223 Rem.) at the same time I purchased my Forster Co-Ax single stage press (several years ago). What a nice combination. The Forster Co-Ax press works beautifully when reloading rifle cartridges and their seating die produces consistent results with little or no run out. I use to use a Lee seating die and get "so-so" results. Not knocking Lee dies because I use them for most of my reloading in pistol and some rifle work (neck sizing - crimping). The Forster micro seating die is a great addition to my reloading arsenal of equipment. I just purchased another one in .308 Win. I believe that speaks for itself. Excellent quality and excellent control of COAL and run out. Great combination when used with a Co-Ax press.

Lesen Sie 8 weitere Bewertungen bei brownells.com

124.9 174.9 48 CHF

Artikel-Nr.: 749006729
FORSTER PRODUCTS, INC. 204 RUGER MICROMETER SEATER DIE
Herstellerproduktnummer: U00002 757253999789 Die Forster Wiederlade Dies sind von hervorragender Qualität und ermöglichen es dir, immer wieder konzentrische Hülsen zu produzieren. Jede Patrone wird aus hochwertigem Stahl hergestellt, der sorgfältig mit sehr engen Toleranzen bearbeitet wird. Die Dies werden sowohl vor als auch nach dem Wärmebehandlungsprozess von Hand poliert, um eine extra feine Oberfläche zu garantieren. Alle Forster Wiederlade Dies verfügen über den Forster Cross Bolt Die Locking Ring, der die beiden Enden des geteilten Rings anzieht, anstatt eine Schraube direkt in die Gewinde des Dies zu drehen. Der Forster Ultra Seater umfasst alle Funktionen des Forster Bench Rest Seater Dies, zusätzlich zu einer ultra genauen Mikrometerverstellung. Diese Mikrometerverstellung ermöglicht es dir, die Geschoss Sitztiefe in Schritten von .0005 Zoll bis .001 Zoll anzupassen und macht den Wechsel von Geschossen einfach - du drehst einfach auf deine vorherige aufgezeichnete Einstellung zurück. Forster Ultra Seater machen das Feintuning deiner Geschosse auf die Züge deiner Laufbohrung einfach.

169.9 CHF 1 CHF 169.90 *

Lieferzeit ca. 8-15 Tage aus dem Lager USA.

Eigenschaften: Matrizenart: Bullet Seating Dies Patrone: 204 Ruger

FORSTER PRODUCTS, INC. ULTRA™ MICROMETER SEATER DIES

Kundenbewertungen zu FORSTER PRODUCTS, INC. 204 RUGER MICROMETER SEATER DIE

Top Takeaways

Eigenschaften

Artikeldetails

Kundenbewertungen zu FORSTER PRODUCTS, INC. 204 RUGER MICROMETER SEATER DIE

Vernetzen

Sichere Bezahlmethoden

Berufsverbände

Willkommen!

FORSTER PRODUCTS, INC.
ULTRA™ MICROMETER SEATER DIES