No-Gunsmithing Optic Mount With Backup Rear "Iron" Sight
An easy way to add a tactical optic to your Kalashnikov, this steel mount replaces the rear sight on any AK-pattern rifle to enable mounting of a red dot or holographic sight. MIL-STD 1913 Picatinny slots provide a rock-solid attachment point for the optic that won’t shift during extended-fire sessions. Easy to install - requires no permanent modification to the rifle. Channel through the length of the mount has a built-in rear sight that works with factory front sight for iron sight backup in the event of optic damage, failure, or battery run-down.
SPECS: Machined steel, black oxide finish. 3½” (8.9cm) long. 3.5 oz. (99g) wt. Rail fits all AK-pattern rifles with a rear leaf sight. All mounting hardware included.
Mehr...
No-Gunsmithing Optic Mount Mit Backup Rear "Iron" Sight
Diese Stahlhalterung ist eine einfache Möglichkeit, Ihrer Kalaschnikow eine taktische Optik zu verleihen. Sie ersetzt das Visier an jedem AK-Gewehr und ermöglicht die Montage eines roten Punkts oder eines holographischen Visiers. MIL-STD 1913 Picatinny-Slots bieten einen soliden Befestigungspunkt für die Optik, der sich bei längeren Feuersitzungen nicht verschiebt. Einfache Installation - keine dauerhaften Änderungen am Gewehr erforderlich. Der durch die gesamte Länge der Montierung verlaufende Kanal verfügt über ein integriertes Visier, das mit dem werkseitigen Visier zusammenarbeitet, um bei Optikbeschädigung, Ausfall oder Erschöpfung der Batterie eine Sicherung des Visiers zu gewährleisten.
TECHNISCHE DATEN: Bearbeiteter Stahl, schwarz oxidiert. 8,9 cm lang. 3,5 oz. (99 g) Gew. Die Schiene passt für alle AK-Gewehre mit Blattkorn. Alle Montageteile enthalten.
Mehr...
Kundenbewertungen zu SAMSON MANUFACTURING CORP REAR SIGHT RAIL STANDARD W/AIMPOINT MICRO T1 INTERFACE®AK47
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4.5
AK47 Rear Sight Rail(14.03.2011)
I mounted this rail on an Izmash AK rear sight base. I've tried other rail mounts including both the side lock receiver mount and dust cover mounts with negligible results due to height and movement, and not holdiong a solid zero. This rail is a great alternative, its solid easy to install and adjust and is extremely stable. I had to slightly modify the front sight base with a dremel in order to mount it but it was well worth the 3 minutes of extra fit and finnish. At the range with an EOTECH 551 it was shooting less than 1" groups at 50 and 3"in. at 100 yds. Great for an AK-SU with a 12" barrel and 4.5in. permanent flashhider. No movement whatsoever. Would be excellent on normal AK's watch optic size due to sight height and offset. I'll be purchasing a Burris Fastfire or Trijicon RMR to replace the larger EOTECH and get a bit lower offset better suited to the compact AKSU.
Best AK Rear Sight Rail Going(30.08.2014)
Of the two AK sight rails that I am aware of this is far and away the best. It's so utterly simple that it borders on brilliant. It is sturdy and in no way impinges on removal/replacement of the receiver cover. Its' small size precludes any sagging (the inherent design flaw of the other sight rail). Use blue LokTite just to be on the safe side. The mount is durable, solid and holds zero just fine. Whereas the previous reviewer altered his sight base for a good fit, I found altering the "foot" of the rail attachment system by Dremel is just as easy, quick and leaves the firearm unaltered.
Artikel-Nr.: 100006266 SAMSON MANUFACTURING CORP REAR SIGHT RAIL STANDARD W/AIMPOINT MICRO T1 INTERFACE®AK47 Herstellerproduktnummer: 01-02024-01 Diese Stahlhalterung ist eine einfache Möglichkeit, Ihrer Kalaschnikow eine taktische Optik zu verleihen. Sie ersetzt das Visier an jedem AK-Gewehr und ermöglicht die Montage eines roten Punkts oder eines holographischen Visiers. MIL-STD 1913 Picatinny-Slots bieten einen soliden Befestigungspunkt für die Optik, der sich bei längeren Feuersitzungen nicht verschiebt. Einfache Installation - keine dauerhaften Änderungen am Gewehr erforderlich. Der durch die gesamte Länge der Montierung verlaufende Kanal verfügt über ein integriertes Visier, das mit dem werkseitigen Visier zusammenarbeitet, um bei Optikbeschädigung, Ausfall oder Erschöpfung der Batterie eine Sicherung des Visiers zu gewährleisten.
No-Gunsmithing Optic Mount With Backup Rear "Iron" Sight
An easy way to add a tactical optic to your Kalashnikov, this steel mount replaces the rear sight on any AK-pattern rifle to enable mounting of a red dot or holographic sight. MIL-STD 1913 Picatinny slots provide a rock-solid attachment point for the optic that won’t shift during extended-fire sessions. Easy to install - requires no permanent modification to the rifle. Channel through the length of the mount has a built-in rear sight that works with factory front sight for iron sight backup in the event of optic damage, failure, or battery run-down.
SPECS: Machined steel, black oxide finish. 3½” (8.9cm) long. 3.5 oz. (99g) wt. Rail fits all AK-pattern rifles with a rear leaf sight. All mounting hardware included.
Mehr...
No-Gunsmithing Optic Mount Mit Backup Rear "Iron" Sight
Diese Stahlhalterung ist eine einfache Möglichkeit, Ihrer Kalaschnikow eine taktische Optik zu verleihen. Sie ersetzt das Visier an jedem AK-Gewehr und ermöglicht die Montage eines roten Punkts oder eines holographischen Visiers. MIL-STD 1913 Picatinny-Slots bieten einen soliden Befestigungspunkt für die Optik, der sich bei längeren Feuersitzungen nicht verschiebt. Einfache Installation - keine dauerhaften Änderungen am Gewehr erforderlich. Der durch die gesamte Länge der Montierung verlaufende Kanal verfügt über ein integriertes Visier, das mit dem werkseitigen Visier zusammenarbeitet, um bei Optikbeschädigung, Ausfall oder Erschöpfung der Batterie eine Sicherung des Visiers zu gewährleisten.
TECHNISCHE DATEN: Bearbeiteter Stahl, schwarz oxidiert. 8,9 cm lang. 3,5 oz. (99 g) Gew. Die Schiene passt für alle AK-Gewehre mit Blattkorn. Alle Montageteile enthalten.
Mehr...
Kundenbewertungen zu SAMSON MANUFACTURING CORP REAR SIGHT RAIL STANDARD W/AIMPOINT MICRO T1 INTERFACE®AK47
Anzahl der Bewertungen: 2
Von brownells.com: 2
Durchschnittliche Bewertung: 4.5
AK47 Rear Sight Rail(14.03.2011)
I mounted this rail on an Izmash AK rear sight base. I've tried other rail mounts including both the side lock receiver mount and dust cover mounts with negligible results due to height and movement, and not holdiong a solid zero. This rail is a great alternative, its solid easy to install and adjust and is extremely stable. I had to slightly modify the front sight base with a dremel in order to mount it but it was well worth the 3 minutes of extra fit and finnish. At the range with an EOTECH 551 it was shooting less than 1" groups at 50 and 3"in. at 100 yds. Great for an AK-SU with a 12" barrel and 4.5in. permanent flashhider. No movement whatsoever. Would be excellent on normal AK's watch optic size due to sight height and offset. I'll be purchasing a Burris Fastfire or Trijicon RMR to replace the larger EOTECH and get a bit lower offset better suited to the compact AKSU.
Best AK Rear Sight Rail Going(30.08.2014)
Of the two AK sight rails that I am aware of this is far and away the best. It's so utterly simple that it borders on brilliant. It is sturdy and in no way impinges on removal/replacement of the receiver cover. Its' small size precludes any sagging (the inherent design flaw of the other sight rail). Use blue LokTite just to be on the safe side. The mount is durable, solid and holds zero just fine. Whereas the previous reviewer altered his sight base for a good fit, I found altering the "foot" of the rail attachment system by Dremel is just as easy, quick and leaves the firearm unaltered.