Ihr Warenkorb ist leer.

Warenkorb

Hilfe und Kontakt

Versandkostenfreie Lieferung ab 399 CHF

100-tägiges Rückgaberecht

Newsletter

Angebote

Über 300.000 Kunden - wir sagen Danke!

4,93/5 "Sehr gut" (1400+ Bewertungen)

40,000+ Produkte aus Jagd und Schiesssport

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER

000000003117 206000020

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

Long-wearing, CNC-machined, aluminum trigger easily replaces the Colt factory nylon/plastic trigger for increased durability and a more solid feeling trigger pull. Use as a standalone enhancement or part of a complete trigger job. Installation may require slight modification; completely eliminates premature trigger wear breakage at the trigger pivot pin hole.

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mehr...

Ersetzt das Kunststoff-Originalteil für bessere Haltbarkeit und verbessertes "Gefühl"

Der langlebige, CNC-gefräste Aluminium-Abzug ersetzt mühelos den Nylon-/Kunststoffabzug von Colt und sorgt für erhöhte Haltbarkeit sowie ein solideres Abzugsgefühl. Verwende ihn als eigenständige Verbesserung oder als Teil eines kompletten Abzugsjobs. Die Installation kann eine leichte Modifikation erfordern; beseitigt vollständig vorzeitigen Abnutzungsbruch am Abzugsdrehpunkt.

SPECS: Aluminium, matt silber. Passt für Colt .380 Government und Mustang Modelle.

Mehr...

Kundenbewertungen zu CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4.1

I would and did buy this product again (21.04.2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07.03.2012)

I had asked the question about whether or not this would fit the new Sig P238, but the response was NO. I decided that my curiousity would not let that deter me from trying it out... After all the Wolff springs will fit both the Colt and the Sig. This went in without a problem and worked out very well. The only thing that I would add to this part (and I am surprised that it was not added) would be an overtravel screw at the bottom. I installed my own and it makes a huge difference. Also, one in a parkerized black would be sweet as well. If Cylinder and Slide decide to machine one in, please send one to me !! and Brownells, advertise this for the Sig P238 also.

A lot better (02.04.2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06.04.2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27.07.2012)

mine had some metal shavings in the nooks and the mounting pin holes shifted the trigger lever back a few mils causing it to get stuck on the ejector clip preventing the trigger from resetting. It only happened when you fired it with live rounds too. Work just fine dry firing. Took me a while to find that one. I fixed that by rounding the corners on the trigger bar bracket. I hit it with some 1100 grit sandpaper to shine it up a bit and get it to slide in a little easier when installing

P938 (10.09.2012)

I read some things about possible using this in the Sig p938. I took the chance and replaced the plastic trigger in the P938 and this one works great. I have also read you can use this in the p238 as well.

Worsened the trigger in P238 (08.11.2014)

I think My upgraded trigger must have been overbored where the trigger spring goes, it seems to have slightly increased the amount of slop and creep, giving the P238 slightly more spongy feeling, and not as crisp as the stock plastic trigger.

I can hear the spring grating on the inside of the trigger as well, none of this happened with the stock plastic piece.

I'm leaving it in for now, to see how this performs at the range.

On a positive side note, trigger breaks at slightly lower weight now, but I didnt put up the trigger gauge pre or post.

Edit: removed the trigger, lubed up the spring and cleaned out the trigger spring area, seems to have improved the trigger and decreased sponginess, still not as crisp as stock though.

My Colt Mustang pocketlite serial no PL1147XX comes with anodized aluminum trigger and did not need to be replaced

Needs to be fit. (11.08.2017)

This is the third trigger that I have installed in a Mustang made by Cylinder and Slide.This one was the worst.The trigger bar slot had to be fit, the Spring hole had to be fit and the pivot hole had to be fit. I think their tooling has to be replaced.

Lesen Sie 8 weitere Bewertungen bei brownells.com

54.9 54.9 1 CHF

Artikel-Nr.: 206000020
CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER
Herstellerproduktnummer: CS311 000000003117 Der langlebige, CNC-gefräste Aluminium-Abzug ersetzt mühelos den Nylon-/Kunststoffabzug von Colt und sorgt für erhöhte Haltbarkeit sowie ein solideres Abzugsgefühl. Verwende ihn als eigenständige Verbesserung oder als Teil eines kompletten Abzugsjobs. Die Installation kann eine leichte Modifikation erfordern; beseitigt vollständig vorzeitigen Abnutzungsbruch am Abzugsdrehpunkt.

54.9 CHF 0 CHF 54.90 *

Nachbestellt, Lieferzeit ca. 4-12 Wochen aus dem Lager USA.

Eigenschaften: Art: Grooved Finish: Silver Hersteller/Modell: Colt Modell: Government, Mustang

Auf die Wunschliste setzen

Frage stellen

Details

Auf die Wunschliste setzen

Frage stellen

Top Takeaways

Der CNC-gefräste Aluminium-Abzug ersetzt den Nylon-/Kunststoffabzug von Colt und bietet mehr Haltbarkeit.
Einfach zu installieren, kann aber leichte Modifikationen erfordern.
Kompatibel mit Colt .380 Government und Mustang Modellen.

Eigenschaften

Art: Grooved Finish: Silver Hersteller/Modell: Colt Modell: Government,Mustang Versandgewicht: 0.005kg Versandhöhe: 5mm Versandbreite: 79mm Versandlänge: 155mm UPC : 000000003117

Artikeldetails

Made in USA
US-Exportklassifizierung: 0A501.c

Verbessere deinen Colt .380 mit dem CNC-gefrästen Aluminium-Abzug! ✨ Erlebe mehr Haltbarkeit und ein besseres Abzugsgefühl.

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mehr...

Ersetzt das Kunststoff-Originalteil für bessere Haltbarkeit und verbessertes "Gefühl"

SPECS: Aluminium, matt silber. Passt für Colt .380 Government und Mustang Modelle.

Mehr...

Kundenbewertungen zu CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Anzahl der Bewertungen: 8
Von brownells.com: 8
Durchschnittliche Bewertung: 4.1

I would and did buy this product again (21.04.2010)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (07.03.2012)

A lot better (02.04.2012)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (06.04.2012)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (27.07.2012)