The bench-mounted RCBS Primer Pocket Swager Tool easily removes military-style primer pocket crimps or staking from cartridge cases. Featuring a rugged cast-aluminum body and foam-padded handle, the tool supports cartridge cases from the inside with a hardened steel rod, perfectly aligning the primer pocket with the swager head. Comes with two steel support rods to fit small and large primer pockets. Slide the case onto the steel rod, rotate the case down into position in the swager, and operate the handle to complete the job.
Mehr...
Das am Tisch montierte RCBS Primer Pocket Swager Tool entfernt mühelos militärische Primer Pocket Crimps oder Stanzungen von Patronen. Mit einem robusten Gehäuse aus Guss-Aluminium und einem schaumstoffgepolsterten Griff unterstützt das Werkzeug die Patronen von innen mit einer gehärteten Stahlstange und richtet das Primer Pocket perfekt mit dem Swagerkopf aus. Es wird mit zwei Stahlstützstangen geliefert, um kleine und grosse Primer Pockets zu passen. Schiebe die Patrone auf die Stahlstange, drehe die Patrone in Position im Swager und betätige den Griff, um die Arbeit abzuschliessen.
Mehr...
Kundenbewertungen zu RCBS BENCH MOUNTED PRIMER POCKET SWAGER
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.3
nice unit; but..(15.07.2012)
Needs an "accessory plate" to bolt to(with cap screws, inc), but no mention of what plate is required and it costs extra. No room for lag bolts, or ears either for a really strong installation. Design is too compact, and needs to grow some to be really sweet.
Works horizontally and does a good job of swaging the brass, but is hard on your bench mounting because you are pulling rather than pressing down. Getting tired of it ripping loose from my bench and always being loose making it sloppy & slow to operate.
Swages Real Well(29.12.2012)
I can understand the issues of the other guy on mounting the unit. But this does not deter me from giving the unit 5 stars. I got this bolted on a 1" thick ply board and use 2 6" c-clamps to mount it to my bench when I need to swage pockets. It is very sturdy. Swaging 5.56 x 45 brass is effortless. I've swaged 500 rounds and have been absolutely satisfied. Get one before they raise the price.
Fast swaging and good cam leverage (15.05.2017)
This thing is smooth and super fast. You can get a lot of shells swaged in a quick amount of time. Adjust it for each type and/or year of brass and you won't have any problems. Good price and fantastic product.
In my research i found this to be the most evolved table mounted swaging system.
The kit came with bolts to mount to a RCBS mounting plate.
If you don't plan on using the mounting plate -
Get the hardware to mount it on your bench from the hardware store, kinda like every other thing that is mounted on your bench.
I can't say good enough things about this product.
Artikel-Nr.: 749013580 RCBS BENCH MOUNTED PRIMER POCKET SWAGER Herstellerproduktnummer: 9474076683094742 Das am Tisch montierte RCBS Primer Pocket Swager Tool entfernt mühelos militärische Primer Pocket Crimps oder Stanzungen von Patronen. Mit einem robusten Gehäuse aus Guss-Aluminium und einem schaumstoffgepolsterten Griff unterstützt das Werkzeug die Patronen von innen mit einer gehärteten Stahlstange und richtet das Primer Pocket perfekt mit dem Swagerkopf aus. Es wird mit zwei Stahlstützstangen geliefert, um kleine und grosse Primer Pockets zu passen. Schiebe die Patrone auf die Stahlstange, drehe die Patrone in Position im Swager und betätige den Griff, um die Arbeit abzuschliessen.
The bench-mounted RCBS Primer Pocket Swager Tool easily removes military-style primer pocket crimps or staking from cartridge cases. Featuring a rugged cast-aluminum body and foam-padded handle, the tool supports cartridge cases from the inside with a hardened steel rod, perfectly aligning the primer pocket with the swager head. Comes with two steel support rods to fit small and large primer pockets. Slide the case onto the steel rod, rotate the case down into position in the swager, and operate the handle to complete the job.
Mehr...
Das am Tisch montierte RCBS Primer Pocket Swager Tool entfernt mühelos militärische Primer Pocket Crimps oder Stanzungen von Patronen. Mit einem robusten Gehäuse aus Guss-Aluminium und einem schaumstoffgepolsterten Griff unterstützt das Werkzeug die Patronen von innen mit einer gehärteten Stahlstange und richtet das Primer Pocket perfekt mit dem Swagerkopf aus. Es wird mit zwei Stahlstützstangen geliefert, um kleine und grosse Primer Pockets zu passen. Schiebe die Patrone auf die Stahlstange, drehe die Patrone in Position im Swager und betätige den Griff, um die Arbeit abzuschliessen.
Mehr...
Kundenbewertungen zu RCBS BENCH MOUNTED PRIMER POCKET SWAGER
Anzahl der Bewertungen: 3
Von brownells.com: 3
Durchschnittliche Bewertung: 4.3
nice unit; but..(15.07.2012)
Needs an "accessory plate" to bolt to(with cap screws, inc), but no mention of what plate is required and it costs extra. No room for lag bolts, or ears either for a really strong installation. Design is too compact, and needs to grow some to be really sweet.
Works horizontally and does a good job of swaging the brass, but is hard on your bench mounting because you are pulling rather than pressing down. Getting tired of it ripping loose from my bench and always being loose making it sloppy & slow to operate.
Swages Real Well(29.12.2012)
I can understand the issues of the other guy on mounting the unit. But this does not deter me from giving the unit 5 stars. I got this bolted on a 1" thick ply board and use 2 6" c-clamps to mount it to my bench when I need to swage pockets. It is very sturdy. Swaging 5.56 x 45 brass is effortless. I've swaged 500 rounds and have been absolutely satisfied. Get one before they raise the price.
Fast swaging and good cam leverage (15.05.2017)
This thing is smooth and super fast. You can get a lot of shells swaged in a quick amount of time. Adjust it for each type and/or year of brass and you won't have any problems. Good price and fantastic product.
In my research i found this to be the most evolved table mounted swaging system.
The kit came with bolts to mount to a RCBS mounting plate.
If you don't plan on using the mounting plate -
Get the hardware to mount it on your bench from the hardware store, kinda like every other thing that is mounted on your bench.
I can't say good enough things about this product.