All cases should be case mouth deburred after trimming or neck turning. Tool is double-ended with standard 45 degree flutes that debur/chamfer the inside and outside mouth of the case. Can be used with the Sinclair Deburring Tools Holder (#749-002-628) to attach the tool to a power drill or screwdriver. Will fit case mouths ranging from .17 caliber to .45 caliber, Rifle or Handgun.
Plus...
Tous les cas devraient être le cas bouche ébavuré après rognage ou le cou. L'outil est amphidrome avec flûtes standard 45 degrés qui ébarber/chanfrein l'intérieur et la bouche à l'extérieur du boîtier. Utilisable avec le support d'outils ébavurage Sinclair (#749-002-628) pour fixer l'outil à une perceuse électrique ou d'un tournevis. Adapteront affaire bouches allant de calibre.17 à calibre.45, carabine ou arme de poing.
Plus...
Évaluations client de L.E. WILSON CHAMFER & DEBURRING TOOL .17-.45 CAL.
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
This one works!(05.10.2012)
This tool is everything that the Lyman (see my review) could have been/should have been, but wasn't: sharp! This tool will not only deburr but also bevel the mouth, as it should, with minimal effort. Wilson makes this tool for others (but NOT Lyman), so all the other brands should be just as good. My original tool (Wilson manfacture) was lost in a fire and was just starting to dull after 30+ years of hard use.
Missing center alignment post(05.04.2017)
Unlike most others, the deburring side is missing the center alignment post. This slows down the useage of this tool. Pick another one that has it.
Référence: 749002551 L.E. WILSON CHAMFER & DEBURRING TOOL .17-.45 CAL. Ref Fabricant: DBT-REG Tous les cas devraient être le cas bouche ébavuré après rognage ou le cou. L'outil est amphidrome avec flûtes standard 45 degrés qui ébarber/chanfrein l'intérieur et la bouche à l'extérieur du boîtier. Utilisable avec le support d'outils ébavurage Sinclair (#749-002-628) pour fixer l'outil à une perceuse électrique ou d'un tournevis. Adapteront affaire bouches allant de calibre.17 à calibre.45, carabine ou arme de poing.
39.9CHF0CHF 39.90
*
En rupture de stock, délai de livraison d'environ 4-12 semaines depuis l'entrepôt des États-Unis.
All cases should be case mouth deburred after trimming or neck turning. Tool is double-ended with standard 45 degree flutes that debur/chamfer the inside and outside mouth of the case. Can be used with the Sinclair Deburring Tools Holder (#749-002-628) to attach the tool to a power drill or screwdriver. Will fit case mouths ranging from .17 caliber to .45 caliber, Rifle or Handgun.
Plus...
Tous les cas devraient être le cas bouche ébavuré après rognage ou le cou. L'outil est amphidrome avec flûtes standard 45 degrés qui ébarber/chanfrein l'intérieur et la bouche à l'extérieur du boîtier. Utilisable avec le support d'outils ébavurage Sinclair (#749-002-628) pour fixer l'outil à une perceuse électrique ou d'un tournevis. Adapteront affaire bouches allant de calibre.17 à calibre.45, carabine ou arme de poing.
Plus...
Évaluations client de L.E. WILSON CHAMFER & DEBURRING TOOL .17-.45 CAL.
Nombre d'évaluations: 2
De brownells.com: 2
Note moyenne: 3.5
This one works!(05.10.2012)
This tool is everything that the Lyman (see my review) could have been/should have been, but wasn't: sharp! This tool will not only deburr but also bevel the mouth, as it should, with minimal effort. Wilson makes this tool for others (but NOT Lyman), so all the other brands should be just as good. My original tool (Wilson manfacture) was lost in a fire and was just starting to dull after 30+ years of hard use.
Missing center alignment post(05.04.2017)
Unlike most others, the deburring side is missing the center alignment post. This slows down the useage of this tool. Pick another one that has it.