Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols. The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench. Rubber feet grip the work surface, allowing for a sturdy hold while working. a ring magnet on the underside of the plate will prevent magnetic parts from escaping.
SPECS: 7” Long x 4” Wide x 1.5” Tall.
Altro...
Supporta una polimero telaio pistola per lavoro armeria e smontaggio di dettaglio.
Fori, asole e pre-posizionati boss togliere pressione da superfici funzione critica mentre perni sono guidati dentro e fuori. Pollice sicurezza e Disconnetti Magazine drop in fori e asole per evitare di danneggiare qualunque posizione, sono in. Alta densità polimero costruzione impedisce guastare del telaio durante la guida perni dentro e fuori. Fissaggio su ciascun lato del blocco tenere l'attaccante rendendo la rimozione e installazione del percussore una brezza di primavera. Un lato è per l'attaccante 45 e l'altro è per l'attaccante 9/40/357. Mobile boss sono facilmente regolabili per posizionare frame in modo facile e veloce. Rialzato pareti su ciascun lato del blocco di posizionare la barra del trigger all'interno del trigger per lo scambio di grilletto facile. Informazioni di contatto e logo Apex espressi direttamente nel corpo del blocco per facilitarne l'identificazione e l'accesso al personale di supporto tecnico di Apex. Piastra di attrezzaggio di Armorer è progettata per fissare direttamente alla parte inferiore del blocco di polimero Armorer Apex, fornendo una superficie rialzata per lavorare sul tuo M & P e pistole di Glock. Portapezzo ha serrature a scatto e slot per contenere 1/8" personalizzato roll cacciaspine e 1/16" chiave a brugola. Piedini in gomma dell'impugnatura la superficie di lavoro, consentendo una presa robusta durante il lavoro. un anello magnetico sulla parte inferiore della piastra sarà impediscono la fuoriuscita di parti magnetiche.
Specifiche: 7" x 4" x 1.5" larga alto.
Altro...
Punteggi dei clienti per APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.4
A Nice Addition(19.07.2014)
The Apex Armorer's Tray is a nice complement to the original Apex Armorer's Block. When coupled together, the tray's non-slip pads prevent the pair from moving around as you are working. The embedded ring magnet helps catch metal parts, although it could be a bit stronger. There is also a small fixture in the center of the tray for holding the muzzle steady while removing slide back plates. The included 1/8" roll pin punch and 1/16" hex wrench fit securely into special recesses for storage. There is also a spot for the Talon Tactical Rear Sight Tool (100-005-388WB; sold separately).
The one really disappointing feature of the Armorer's Tray is the cheap 1/16" hex wrench. Most of the bluing came off when I cleaned and oiled it for the first time. I still could have used it, but my obsessive nature forced me to replace it with a much nicer ball-ended hex wrench from Bondhus (Part# 16903). It snaps into the tray for storage, just as the original did, and the added utility of having one ball end is great.
Limited Uses(11.11.2013)
I bought one of these to work on my Glock pistols. I have found that even with two adjustable positioning rollers you are still very limited in the number of positions that you can use it with and the devise would not fit all Glock models I.E. G26, 27, & 33.It did, however hold my G17 & 19 well with the slide removed and the slide lock facing up. A roll of duct tape would work better for my uses.
Very Useful Tool for M&P Upgrades(09.12.2013)
This is a "must have" if you plan on installing the APEX Forward Set Sear or Action Enhancement kits on your M&P pistol. The product is very well thought out. It provides a tight fitting hold for your pistol frame and trigger. I cannot imagine completing these upgrades without this product.
Of Limited Use For Glock Pistols...(18.12.2013)
After using this item for work on Glock only it seems one of the Brownells existing bench blocks is the more appropriate tool. Found it to have very limited use for above make and quite a bit more useful for the M&P models. In a nutshell try one of the poly bench blocks before trying this if your main use will be for Glock Pistols.
Great Product! Works as Described(17.01.2014)
I got this as a gift for Christmas because I do most of my own work on my M&P's it works great and the added bonus of having the trigger spots and firing pin holes is perfect...
N. prodotto: 100011660 APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK Parti Fabbricante: 104-001856008005284 Fori, asole e pre-posizionati boss togliere pressione da superfici funzione critica mentre perni sono guidati dentro e fuori. Pollice sicurezza e Disconnetti Magazine drop in fori e asole per evitare di danneggiare qualunque posizione, sono in. Alta densità polimero costruzione impedisce guastare del telaio durante la guida perni dentro e fuori. Fissaggio su ciascun lato del blocco tenere l'attaccante rendendo la rimozione e installazione del percussore una brezza di primavera. Un lato è per l'attaccante 45 e l'altro è per l'attaccante 9/40/357. Mobile boss sono facilmente regolabili per posizionare frame in modo facile e veloce. Rialzato pareti su ciascun lato del blocco di posizionare la barra del trigger all'interno del trigger per lo scambio di grilletto facile. Informazioni di contatto e logo Apex espressi direttamente nel corpo del blocco per facilitarne l'identificazione e l'accesso al personale di supporto tecnico di Apex. Piastra di attrezzaggio di Armorer è progettata per fissare direttamente alla parte inferiore del blocco di polimero Armorer Apex, fornendo una superficie rialzata per lavorare sul tuo M & P e pistole di Glock. Portapezzo ha serrature a scatto e slot per contenere 1/8" personalizzato roll cacciaspine e 1/16" chiave a brugola. Piedini in gomma dell'impugnatura la superficie di lavoro, consentendo una presa robusta durante il lavoro. un anello magnetico sulla parte inferiore della piastra sarà impediscono la fuoriuscita di parti magnetiche.
74.9CHF8CHF 74.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Peso della spedizione: 0.091kgAltezza di spedizione: 43mmLarghezza di spedizione: 132mmLunghezza di spedizione: 206mm
Dettagli dell'elemento
Made in Usa
N. prodotto: 100014075 APEX TACTICAL SPECIALTIES INC ARMORER'S BLOCK TOOLING PLATE Parti Fabbricante: 104-110856008005291 Fori, asole e pre-posizionati boss togliere pressione da superfici funzione critica mentre perni sono guidati dentro e fuori. Pollice sicurezza e Disconnetti Magazine drop in fori e asole per evitare di danneggiare qualunque posizione, sono in. Alta densità polimero costruzione impedisce guastare del telaio durante la guida perni dentro e fuori. Fissaggio su ciascun lato del blocco tenere l'attaccante rendendo la rimozione e installazione del percussore una brezza di primavera. Un lato è per l'attaccante 45 e l'altro è per l'attaccante 9/40/357. Mobile boss sono facilmente regolabili per posizionare frame in modo facile e veloce. Rialzato pareti su ciascun lato del blocco di posizionare la barra del trigger all'interno del trigger per lo scambio di grilletto facile. Informazioni di contatto e logo Apex espressi direttamente nel corpo del blocco per facilitarne l'identificazione e l'accesso al personale di supporto tecnico di Apex. Piastra di attrezzaggio di Armorer è progettata per fissare direttamente alla parte inferiore del blocco di polimero Armorer Apex, fornendo una superficie rialzata per lavorare sul tuo M & P e pistole di Glock. Portapezzo ha serrature a scatto e slot per contenere 1/8" personalizzato roll cacciaspine e 1/16" chiave a brugola. Piedini in gomma dell'impugnatura la superficie di lavoro, consentendo una presa robusta durante il lavoro. un anello magnetico sulla parte inferiore della piastra sarà impediscono la fuoriuscita di parti magnetiche.
64.9CHF9CHF 64.90
*
Tempi di consegna circa 8-15 giorni dal magazzino negli Stati Uniti.
Caratteristiche:Adatto per: Glock, Smith & WessonModello: M&P, Universal Handguns
Supports a polymer frame pistol for armory work and detail disassembly.
Pre-positioned bosses, slots and holes remove pressure from critical function surfaces while pins are driven in and out. Thumb Safety and Magazine disconnect drop into holes and slots to prevent damage no matter what position they are in. High Density Polymer construction prevents marring of the frame while driving pins in and out. Retaining slots on each side of the block hold the striker making removal and installation of the striker spring a breeze. One side is for the 45 striker and the other is for the 9/40/357 striker. Moveable bosses are easily adjustable to position frames quickly and easily. Raised walls on each side of the block position the trigger bar within the trigger to easy trigger swapping. Apex logo and contact information cast directly into the body of the block for easy identification and access to Apex’s tech support staff. The Armorer's Tooling Plate is designed to attach directly to the underside of the Apex Polymer Armorer's Block, providing a raised surface for you to work on your M&P and Glock Pistols. The tooling plate has snap locks and slots to hold the 1/8" custom roll pin punch and 1/16" allen wrench. Rubber feet grip the work surface, allowing for a sturdy hold while working. a ring magnet on the underside of the plate will prevent magnetic parts from escaping.
SPECS: 7” Long x 4” Wide x 1.5” Tall.
Altro...
Supporta una polimero telaio pistola per lavoro armeria e smontaggio di dettaglio.
Fori, asole e pre-posizionati boss togliere pressione da superfici funzione critica mentre perni sono guidati dentro e fuori. Pollice sicurezza e Disconnetti Magazine drop in fori e asole per evitare di danneggiare qualunque posizione, sono in. Alta densità polimero costruzione impedisce guastare del telaio durante la guida perni dentro e fuori. Fissaggio su ciascun lato del blocco tenere l'attaccante rendendo la rimozione e installazione del percussore una brezza di primavera. Un lato è per l'attaccante 45 e l'altro è per l'attaccante 9/40/357. Mobile boss sono facilmente regolabili per posizionare frame in modo facile e veloce. Rialzato pareti su ciascun lato del blocco di posizionare la barra del trigger all'interno del trigger per lo scambio di grilletto facile. Informazioni di contatto e logo Apex espressi direttamente nel corpo del blocco per facilitarne l'identificazione e l'accesso al personale di supporto tecnico di Apex. Piastra di attrezzaggio di Armorer è progettata per fissare direttamente alla parte inferiore del blocco di polimero Armorer Apex, fornendo una superficie rialzata per lavorare sul tuo M & P e pistole di Glock. Portapezzo ha serrature a scatto e slot per contenere 1/8" personalizzato roll cacciaspine e 1/16" chiave a brugola. Piedini in gomma dell'impugnatura la superficie di lavoro, consentendo una presa robusta durante il lavoro. un anello magnetico sulla parte inferiore della piastra sarà impediscono la fuoriuscita di parti magnetiche.
Specifiche: 7" x 4" x 1.5" larga alto.
Altro...
Punteggi dei clienti per APEX TACTICAL SPECIALTIES INC APEX POLYMER ARMORER'S BLOCK
Numero di punteggi: 5
Da brownells.com: 5
Punteggio medio: 3.4
A Nice Addition(19.07.2014)
The Apex Armorer's Tray is a nice complement to the original Apex Armorer's Block. When coupled together, the tray's non-slip pads prevent the pair from moving around as you are working. The embedded ring magnet helps catch metal parts, although it could be a bit stronger. There is also a small fixture in the center of the tray for holding the muzzle steady while removing slide back plates. The included 1/8" roll pin punch and 1/16" hex wrench fit securely into special recesses for storage. There is also a spot for the Talon Tactical Rear Sight Tool (100-005-388WB; sold separately).
The one really disappointing feature of the Armorer's Tray is the cheap 1/16" hex wrench. Most of the bluing came off when I cleaned and oiled it for the first time. I still could have used it, but my obsessive nature forced me to replace it with a much nicer ball-ended hex wrench from Bondhus (Part# 16903). It snaps into the tray for storage, just as the original did, and the added utility of having one ball end is great.
Limited Uses(11.11.2013)
I bought one of these to work on my Glock pistols. I have found that even with two adjustable positioning rollers you are still very limited in the number of positions that you can use it with and the devise would not fit all Glock models I.E. G26, 27, & 33.It did, however hold my G17 & 19 well with the slide removed and the slide lock facing up. A roll of duct tape would work better for my uses.
Very Useful Tool for M&P Upgrades(09.12.2013)
This is a "must have" if you plan on installing the APEX Forward Set Sear or Action Enhancement kits on your M&P pistol. The product is very well thought out. It provides a tight fitting hold for your pistol frame and trigger. I cannot imagine completing these upgrades without this product.
Of Limited Use For Glock Pistols...(18.12.2013)
After using this item for work on Glock only it seems one of the Brownells existing bench blocks is the more appropriate tool. Found it to have very limited use for above make and quite a bit more useful for the M&P models. In a nutshell try one of the poly bench blocks before trying this if your main use will be for Glock Pistols.
Great Product! Works as Described(17.01.2014)
I got this as a gift for Christmas because I do most of my own work on my M&P's it works great and the added bonus of having the trigger spots and firing pin holes is perfect...